0.8mm pitch connector For PCBs Right-angle through hole type female connector for PCBs HDRA-E68W1LFDT-( ) Right-angle Through hole ANSI/SFF8441 Configuration of product Part No. HDRA- E 68 W 1 LFD T- ( ) Series name Lock screw No. of contacts: 136 (682) Blank: None No. of stacks: 2 SL : Provided (Thickness of panel: 1.12 mm) Type of contact LFD: Right-angle through hole type, female With location peg T : Location peg T1: Board lock pin 0.03 42.7 28.3 POS.#68 1.20.03 1.15 5.08 0.05 1.15 0.03 0.3 2.02 5.3 5.08 1.15 1.2 1.15 37.7 34.7 R 2.4 11.84 35 3.5 68 POS.#1 (CN2) 2.08 1 POS.#2 (CN2) 5.84 1 34 3.46 35 68 34 32.35 0.05 6-o1.2 (P.T.H.) PCB layout for reference only t=1.6mm POS.#68 (CN1) 25 2.02 o2.25 PAD Edge of PCB 0.833=26.4 (CN2) 0.1 0.4 0.03 0.8 0.03 0.833=26.4 0.05 32.35 0.1 POS.#68 (CN2) 37.7 31.65 o0.95 POS.#1(CN2) POS.#2(CN2) 1.15 2.250.05 POS.#1 (CN1) 6.3MAX 0.03 1.6 0.03 (Four lock screws are supplied with a connector.) POS.#2 (CN1) PAD o10.1 POS.#67(CN1) POS.#68(CN1) 0.03 JAPAN HONDA POS.#1 (CN1) 0.05 2.78 1.6 136-o0.65 (P.T.H.) 0.03 1.20.03 0.03 1.15 2.02 2.98 0.833=26.4 0.05 0.03 0.03 1.15 1.2 1.15 Components Contacts 5.84 4.88 Bracket Insulator Square nuts Shell Lock screw Panel mounting-hole layout for reference only Mating connector: HDRA series IDC type male cable connector, or straddle SMT type male connector on the PCB Others Wire wrapping Crimping Soldering IDC Press-in SMT DIP