SAW FILTER FOR Band13 Murata part number : SAFEA751MAL0F00 Package Dimensions Specification Specification Item -30 to 85C Nominal Center Frequency(fc) 252C typ. 751MHz 1.350.05 1.050.05 Insertion Loss (746 to 756MHz) Dot Marking(0.3) D X 2-0.250.05 0.5max. (0.075) 5-0.3250.050 (3) (1) (0.05) 2-0.250.05 (5) (4) 5-0.250.05 2-0.250.05 Marking : Laser Printing (1) : Unbalance Port (4) : Unbalance Port Others : Ground Unit : mm 1.7 dB 1) 15.5 to 15.5 MHz 50 dB min. 50 dB min. 61 dB 2) 31 to 31 MHz 50 dB min. 50 dB min. 61 dB 3) 716 to 728 MHz 20 dB min. 20 dB min. 41 dB 4) 771 to 777 MHz 10 dB min. 10 dB min. 16 dB 5) 777 to 787 MHz 46 dB min. 46 dB min. 51 dB 6) 808 to 818 MHz 50 dB min. 50 dB min. 65 dB 7) 824 to 849 MHz 50 dB min. 50 dB min. 64 dB 8) 880 to 915 MHz 50 dB min. 50 dB min. 62 dB 9) 1523 to 1543 MHz 40 dB min. 40 dB min. 60 dB 10) 1570 to 1580 MHz 50 dB min. 50 dB min. 60 dB 11) 1850 to 1910 MHz 50 dB min. 50 dB min. 58 dB 12) 1920 to 1980 MHz 50 dB min. 50 dB min. 58 dB 13) 2300 to 2330 MHz 40 dB min. 40 dB min. 48 dB 14) 2400 to 2500 MHz 50 dB min. 50 dB min. 59 dB 15) 2500 to 3000 MHz 35 dB min. 35 dB min. 52 dB 16) 3000 to 4000 MHz 20 dB min. 20 dB min. 32 dB 17) 4000 to 5000 MHz 5 dB min. 5 dB min. 16 dB 18) 5000 to 6000 MHz 5 dB min. 5 dB min. 14 dB Ripple Deviation (746 to 756MHz) 1.3 dB max. 1.1 dB max. 0.6 dB VSWR (746 to 756MHz) 1.8 max. 1.7 max. 1.2 Unbalance Port Matching Impedance (nominal) Input Signal Level July. 23, 2010 2.5 dB max. Absolute Attenuation (0.17) (2) 2.8 dB max. 50 31.6mW (+15dBm), 2000 hours 1/5 SAW FILTER FOR Band13 Murata part number : SAFEA751MAL0F00 Frequency Performance July. 23, 2010 2/5 SAW FILTER FOR Band13 8.00.2 D X D X D X +0.1 0.8-0.0 4.00.1 0.300.05 Direction of Feed 3max. 1.60.1 +0.1 1.5-0.0 2.000.05 3max. 4.00.1 3.500.05 Dimensions of Carrier Tape 1.750.10 Murata part number : SAFEA751MAL0F00 0.700.10 Cover Tape 1.30.1 Dimensions of Tape Unit: mm Trailer tape 160...190 Components 80...120 Leader Cavity 400...560 Unit: mm Dimensions of Reel 2.00.5 178) 13.5max. (60) 9.00.5 13.00.5 Unit: mm SAFEA751MAL0F00R12 ... 2000pcs/reel SAFEA751MAL0F00R14 ... 4000pcs/reel July. 23, 2010 3/5 SAW FILTER FOR Band13 Murata part number : SAFEA751MAL0F00 Recommended Land Pattern 0.25 0.25 0.425 0.25 1.3 0.25 0.325 0.525 0.525 0.325 0.325 0.425 : Land Pattern Unit : mm 1.6 Test Circuit 2 3 5 4 1 50 July. 23, 2010 50 4/5 SAW FILTER FOR Band13 Murata part number : SAFEA751MAL0F00 RoHS Compliance This component is compliant with RoHS directive. This component was always RoHS compliant from the first date of manufacture. Caution - Limitation of Applications Please contact us before using our products for the applications listed below which require especially for the prevention of defects which might directly cause damage to the third party's life, body or property. a. Aircraft equipment b. Aerospace equipment c. Undersea equipment d. Nuclear control equipment e. Medical equipment f. Transportation equipment (vehicles, trains, ships, etc.) g. Traffic signal equipment h. Disaster prevention / crime prevention equipment i. Data - processing equipment j. Application of similar complexity and / or reliability requirements to the applications listed in the above This PDF Datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. This PDF Datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. July. 23, 2010 5/5