Gap Filler 1100SF (Two-Part) Thermally Conductive, Silicone-Free, Liquid Gap Filling Material Features and Benefits TYPICAL PROPERTIES OF GAP FILLER 1100SF PROPERTY Color / Part A * Thermal conductivity: 1.1 W/m-K * No silicone outgassing or extraction * Ultra-conforming, designed for fragile and low-stress applications * Ambient and accelerated cure schedules * 100% solids - no cure by-products Gap Filler 1100SF is the thermal solution for silicone-sensitive applications.The material is supplied as a two-part component, curing at room or elevated temperatures.The material exhibits low modulus properties then cures to a soft, flexible elastomer, helping reduce thermal cycling stresses during operation and virtually eliminating stress during assembly of low-stress applications. Color / Part B Example - Viscosity of Part A @ 45: Viscosity of Part A at 25C is 450,000 cp. The multiplication factor for part A at 45C is 0.39. Therefore: (450,000) x (0.39) = 175,500 cps Red Visual 450,000 ASTM D2196 Density (g/cc) 2.0 2.0 ASTM D792 Mix Ratio 1:1 1:1 -- 6 6 -- PROPERTY AS CURED Color Orange Orange Visual Hardness (Shore 00) (2) 60 60 ASTM D2240 Heat Capacity (J/g-K) 0.9 0.9 ASTM E1269 -76 to 257 -60 to 125 -- ELECTRICAL AS CURED Dielectric Strength (V/mil) 400 400 ASTM D149 Dielectric Constant (1000 Hz) 5.0 5.0 ASTM D150 Volume Resistivity (Ohm-meter) 1010 1010 ASTM D257 Flame Rating V-O V-O U.L. 94 THERMAL AS CURED Thermal Conductivity (W/m-K) 1.1 1.1 ASTM D5470 Continuous Use Temp (F) / (C) CURE SCHEDULE Pot Life @ 25C (3) 240 min (4 hr) 240 min (4 hr) -- Cure @ 25C (hrs) (4) 24 24 -- Cure @ 100C (min) (4) 10 10 -- 1) Brookfield RV, Heli-Path, Spindle TF @ 2 rpm, 25C. 2) Thirty second delay value Shore 00 hardness scale. 3) Time for viscosity to double. 4) Cure schedule (rheometer - time to read 90% cure) Gap Filler 1100SF can be mixed and dispensed using dual-tube cartridge packs with static mixers and manual or pneumatic gun or high volume mixing and dispensing equipment (application of heat may be used to reduce viscosity). Typical Applications Include: * Silicone-sensitive optic components * Hard disk assemblies * Silicone-sensitive electronics * Dielectric for bare-leaded devices * Filling various gaps between heat-generating devices to heat sinks and housings * Mechanical switching relay Configurations Available: * Supplied in cartridge or kit form Building a Part Number The Bergquist Company European Headquarters Bramenberg 9a, 3755 BT Eemnes Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 NA = Selected standard option. If not selecting a standard option, insert company name, drawing number, and revision level. Cartridges: 50cc=50.0cc, 400cc = 400.0cc Kits: 1200cc = 1200.0cc, or 10G = 10 gallon Pot Life: 240 = 240 minutes 00 = No spacer beads 07 = 0.007" spacer beads GF1100SF = Gap Filler 1100SF Material Note: To build a part number, visit our website at www.bergquistcompany.com. Gap Pad (R): U.S. Patent 5,679,457 and others www.bergquistcompany.com The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 Standard Options NA Section E - 240 - 400cc - Section D 00 Section C - Section B GF1100SF Section A Multiplication Factor Part A Part B 1.43 1.57 1.00 1.00 0.58 0.50 0.39 0.30 0.32 0.24 TEST METHOD Visual Red Shelf Life @ 25C (months) Application Temperature C 20 25 35 45 50 METRIC VALUE Yellow 450,000 Viscosity as Mixed (cps) (1) The two components are colored to assist as a mix indicator (1:1 by volume).The mixed system will cure at ambient temperature. Unlike cured thermal pad materials, the liquid approach offers infinite thickness variations with little or no stress during assembly displacement. Gap Filler 1100SF, although exhibiting some natural tack characteristics, is not intended for use in thermal interface applications requiring a mechanical structural bond. TEMPERATURE DEPENDENCE OF VISCOSITY The viscosity of the Gap Filler 1100SF material is temperature dependent.The table below provides the multiplication factor to obtain viscosity at various temperatures.To obtain the viscosity at a given temperature, look up the multiplication factor at that temperature and multiply the corresponding viscosity at 25C. IMPERIAL VALUE Yellow The Bergquist Company - Asia Room 15, 8/F Wah Wai Industrial Centre No. 38-40, Au Pui Wan Street Fotan, Shatin, N.T. Hong Kong Ph: 852.2690.9296 Fax: 852.2690.2344 All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_GF_1100SF_0712 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bergquist Company: GF1100SF-00-240-50cc