D.C. geared motors with brushes 0.5 Nm 3.9 Watts A range of D.C. geared motors with ovoid gearbox. Mechanical rating of gearbox with output shaft stalled : 0.5 Nm. 3.9 Watt motor versions. Available in either 12 or 24 V D.C. Gearbox ratios options for 0.36 to 430 rpm. Specifications 1 Type Voltage Standard speed (rpm) Output speed (rpm) Ratios (i) 430 10 215 20 179 24 143 30 108 40 90 48 54 80 49 90 29 150 22 200 11 375 8.6 500 5.8 750 3.6 1200 1.8 2400 0.80 5400 0.36 12000 General characteristics Motor Gearbox Maximum permitted torque from gearmotor under continuous conditions (for 1 millions turns) Nm Axial load static (daN) Radial load static (daN) Max. output (W) Nominal output (W) Gearbox case temperature rise (C) Weight (g) Product adaptations To order, see page 13 36 Special supply voltages Special cable lengths Optional encoder Special connectors Special output shafts Special gearbox ratios Special gear wheel material Special output bearings Special mounting plate 3.9 Watts 3.9 Watts 82 861 0 12 V 4300 82 861 0 24 V 4300 82 861 006 82 861 007 82 861 015 82 861 016 82 861 008 82 861 009 82 861 017 82 861 018 82 861 010 82 861 019 82 861 011 82 861 012 82 861 013 82 861 020 82 861 021 82 861 022 82 861 014 82 861 023 82 860 0 81 021 0 0.5 82 860 0 81 021 0 0.5 1 8 3.9 3 50 160 1 8 3.9 3 50 160 Curves The shaded zone represents the operating range of the geared motor. The horizontal line marks the maximum torque available in continuous duty cycle for a given life. For higher torque ratings, service life will be reduced. Nominal speed and torque curves 3000 mN.m 1000 500 300 100 30 1 10 1 23 10 2030 100 200300 B RPM 1 Dimensions 82 861 0 61,3 max. 3 4 1 2 B 2 fixing holes O 3.2 C 2 tags NFC 20-120 series 2.8 x 0.5 mm D (shaft pushed-in ) E 3.5 mm across flats Options Shaft 70 999 421 SP1295.10 1 Shaft 79 200 779 1 Shaft 79 200 967 1 2 B (shaft pushed-in ) C 5 across flat B (shaft pushed-in ) B (shaft pushed-in ) 37