For further information contact your local STMicroelectronics sales office.
December 2012 Doc ID 024041 Rev 1 1/3
3
STM3240G-JAVA
STM32 F4 series Java evaluation kit
Data brief
Features
The STM32Java software development kit (SDK)
features one or more Java Platforms (JPF) for
STM32 MCUs.
Each JPF provides an abstraction of a number of
features of the STM32 microcontrollers and of the
components available on the STM32 boards.
The following components and peripherals are
supported by the JPFs:
3.2" 240x320 TFT color LCD including the
touch screen capability with MicroUI™ for
rich HMI applications and Micro Widget
Toolkit, MWT for enhanced widgets
Ethernet with an integrated TCP/IP stack
and the sockets interface
RS-232 USART communication
Joystick with 4-direction control and
selector wakeup, tamper and user buttons
–4 color LEDs
Embedded ST-LINK/V2 for development
purposes
SNI (Simple Native Interface) and SP
(Shielded Plug) to interface Java and C
world
Hardware floating point support
Description
The STM3240G-JAVA kit is a complete platform
to evaluate the development of embedded
applications in Java for the STM32 F4 series
microcontrollers.
The kit is composed of the STM3240G-EVAL
evaluation board and a DVD ROM which contains
an evaluation version of the STM32Java software
development kit based on MicroEJ®.
MicroEJ® is based on the Eclipse™ IDE and
provides extended features for using Java in
embedded systems to design and deploy
embedded Java applications, simulate embedded
Java applications on PCs and perform automated
tests.
The main limitations of the evaluation version are
3 months of use from the first launch and 1 hour
of runtime.
A Java demo is programmed in the
STM32F407IGH6 microcontroller on the
evaluation board.
Figure 1. STM32Java workbench
www.st.com
Revision history STM3240G-JAVA
2/3 Doc ID 024041 Rev 1
Revision history
Table 1. Document revision history
Date Revision Changes
14-Dec-2012 1Initial release.
STM3240G-JAVA
Doc ID 024041 Rev 1 3/3
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com