M Vishay Thin Film Commercial Thick Film Resistor, Surface Mount Chip FEATURES Actual Size 0502 Utilizing proven expertise in thick and thin film resistors to satisfy your manufacturing needs, Vishay provides a high rel chip with the same reliability and stability found in military grade resistors. These chips are available in the widest range of sizes, values, and performance characteristics. CONSTRUCTION Resistor Overglaze * Lead (Pb)-free or Sn/Pb terminations available * High purity alumina substrate for high power dissipation (2 W max.) * Wraparound terminations featuring a thin film adhesion layer covered with a leach resistant nickel barrier layer for + 150 C operating conditions * High speed laser trimming for high volume requirements * Ruthenium based cermet thick film for dependable performance * Fired-on glass passivation * Tape and reel packaging standard; static-free waffle pack available * Active trim and 0 chips * Compliant to RoHS directive 2002/95/EC TYPICAL PERFORMANCE ABSOLUTE Alumina Substrate Inner Electrode Plated Solder Nickel Barrier TCR 100 TOL. 1 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Ruthenium 10 to 25 M 100 ppm/C to 300 ppm/C 1 % to 10 % 0.15 % 25 V to 200 V - 55 C to + 150 C < - 35 dB (typical) - CONDITIONS - 55 C to + 125 C 2000 h at + 70 C - COMPONENT RATINGS CASE SIZE (1) POWER RATING (mW) 0402 100 0502 100 0504 125 0505 125 0603 150 0705 200 0805 200 1005 250 1010 500 1206 330 1505 350 2010 1000 2208 750 2512 2000 Notes (1) 0705 and 0805 are the same (only use 0805 when ordering) * Consult factory for nominals above 25 M WORKING VOLTAGE (V) 25 25 40 40 40 50 50 75 75 100 100 175 150 200 RESISTANCE RANGE () 10 to 10M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M 10 to 25M * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 69 For technical questions, contact: thinfilm@vishay.com Document Number: 60031 Revision: 09-Nov-09 M Commercial Thick Film Resistor, Surface Mount Chip Vishay Thin Film DIMENSIONS in inches D W T E L CASE SIZE TERM L W T D E 0402 B 0.042 0.006 0.022 0.005 0.010 to 0.033 0.010 0.005 0.010 0.005 0502 B 0.055 0.005 0.025 0.005 0.020 Max. 0.010 0.005 0.015 0.005 0504 B 0.055 0.005 0.040 0.005 0.020 0.005 0.010 0.005 0.010 0.005 0505 B 0.055 0.006 0.050 0.005 0.012 to 0.033 0.010 0.005 0.015 0.005 0603 B 0.064 0.006 0.032 0.005 0.010 to 0.033 0.012 0.005 0.015 0.005 0705, 0805 (1) B 0.080 0.006 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 1005 B 0.105 0.007 0.050 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 1010 B 0.105 0.007 0.100 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 1206 B 0.126 0.008 0.063 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010 1505 B 0.155 0.007 0.050 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 2010 B 0.197 0.006 0.098 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 2208 B 0.230 0.007 0.075 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 2512 B 0.250 0.006 0.124 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) ENVIRONMENTAL TESTS 10 R (%) 100 k R (%) Thermal Shock 0.02 0.03 Short Term Overload 0.02 0.02 Low Temperature Operation 0.03 0.04 Resistance to Solder Heat 0.06 0.02 Moisture Resistance 0.10 0.08 High Temperature Exposure 0.02 0.02 ENVIRONMENTAL TEST DERATING CURVE Precent of Rated Power 100 80 60 40 20 0 0 70 125 150 Ambient Temperature C Document Number: 60031 Revision: 09-Nov-09 For technical questions, contact: thinfilm@vishay.com www.vishay.com 70 M Commercial Thick Film Resistor, Surface Mount Chip Vishay Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M-1206K5001GBT1 (preferred part number format) M - 1 2 0 6 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC M- = High rel cermet thick film wraparound 0402 0502 0504 0505 0603 0805 1005 1010 1206 1505 2010 2208 2512 K = 100 ppm/C M = 300 ppm/C X = 0 jumper K 5 RESISTANCE 0 0 1 TOLERANCE First 3 digits are significant figures and the last digit specifies the number of zeros to follow. "R" designates the decimal point. F=1% G=2% J=5% K = 10 % N = Not trimmed G B TERMINATION T 1 PACKAGING B = Wraparound tin/lead plated solder S = Wraparound lead (Pb)-free plated solder P = Epoxy bondable Example: 10R0 = 10 1002 = 10 k BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult Historical Part Number example: M0505K1003JBT (will continue to be accepted) M 0505 K 1003 J B T STYLE CASE SIZE TCR CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGING www.vishay.com 71 For technical questions, contact: thinfilm@vishay.com Document Number: 60031 Revision: 09-Nov-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1