For technical questions, contact: powertron@vishaypg.com
FPR FNR 2-T227 FPR FNR 4-T227
Powertron
Document Number: 64207
Revision: 20-09-10
www.powertron.de
1
SPECIFICATIONS
Resistances from 0.001Ohm to 100Ohms•
Power Rating to 80Watt•
Resistance Tolerances to ±0.1%•
TCR to ±15ppm/K•
Load Stability to 0.1%•
Type FPR 2-T227 FPR 4-T227 FNR 2-T227 FNR 4-T227
Terminals 2 4
(kelvin connection)
2 4
(kelvin connection)
Resistance Range 0.01 to 100 Ohms 0.001 to 100 Ohms 0.01 to 100 Ohms 0.001 to 100 Ohms
Power Rating
(with heatsink)
60W 80W
Thermal Resistance Rthj-c 1.3 K/W 1.0 K/W
Tolerances 0.1% / 1% / 2% / 5%
(others upon request)
Stability 0.1% / 0.2% / 0.5%
(depends on stress)
Temperature Coefcient ±15 ppm/K (20 to 60°C)
from R < 0.02 Ohms ±20 ppm/K (20 to 60°C)
FPR 2-T227 / FNR 2-T227 TK Shift depends from
resistance value (see graph next page)
Voltage Proof 1.5 kV DC
Thermal EMF < 1 µV/K
Max. Current 50A
(higher upon request)
Operating Temperature -40°C to 130°C
Resistor Material Metalfoil CuNiMn (DIN 17471)
Substrate Al2O3AlN
Housing Epoxy
Connector Material Cu / tinned or nickel plated
Max. Torque backplate: 1.5Nm
terminals: 1.3 Nm
Part Number - Resistance - Tolerance
FPR 2-T227 1.1 Ohms 1%
Ordering Information
For technical questions, contact: powertron@vishaypg.com
FPR FNR 2-T227 FPR FNR 4-T227
Powertron
Document Number: 64207
Revision: 20-09-10
www.powertron.de
2
DR/R (ppm)
Temperature C)
-40
200
-20 140
120
80
6040 100
-8000
4000
2000
0
-2000
-4000
-6000
+15ppm/K
-15ppm/K
Limit 2 (3s)
Limit 1 (3s)
Nominal
DR/R
2
5
10
20
50
100
200
TCR-Shift (ppm/K)
Resistance Value (mOhm)
table A
Temperature Coefcient
Derating and Stability
Dimensions and Attachment Variations
Power Rating Notes -
The FPR/FNR Series Foil Resistors must be attached to a suit-
able heatsink. The maximum internal resistor temperature is
130°C for a 0.5% stability part.
To specify an appropriate heatsink use the following formula :
RθH = TMAX - ( P x RθR ) - TA
P
Where: RθH = Thermal Resistance of Heatsink ( K/W )
R
θR = Thermal Resistance of Resistor ( K/W )
T
MAX = Maximum Temperature of Resistor
T
A = Ambient Temperature of Heatsink ( °C )
P = Power Through Resistor ( W )
SPECIFICATIONS (continued)
FPR/FNR 2-T227 FPR/FNR 4-T227
Dimension mm
tol.
(±mm) inches
tol.
(±inches)
A 26 0.5 1.02 0.020
B 38 0.5 1.50 0.020
C 12.7 0.2 0.50 0.008
D 4 0.2 0.16 0.008
E 30 0.2 1.18 0.008
F 15 0.2 0.59 0.008
G 4.1 0.2 0.16 0.008
H 10 0.2 0.39 0.008
I 8 0.2 0.31 0.008
J 4 0.2 0.16 0.008
K 2 0.2 0.08 0.008
L 0.8 0.1 0.03 0.004
M M4 M4
N 10 0.2 0.39 0.008
O 11.9 0.2 0.47 0.008
0
20
40
60
80
100
120
25 50 85 100 115 130
Temperature of the backplate C)
Power ( % from
nominal power)
0.1%
0.2%
0.5%
Vishay Precision Group
Document No.: 63999
Revision: 27-Apr-11
www.vishaypg.com
1
Legal Disclaimer Notice
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of
purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,
including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different applications
and performance may vary over time. Statements regarding the suitability of products for certain types of
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the
properties described in the product specification is suitable for use in a particular application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by
any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel
to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Legal Disclaimer Notice
Disclaimer
Document No.: 63999
Revision: 27-Apr-11