30 Drawings are actual size. RG-6/U TYPE CABLE CONNECTORS PRK Salah eee oe SDATAGRADE 'RG-6.FD TYPE a PART NUMBER GENERAL GOLD PIN TIN PIN, @@ APPLICATION 71439 32684 312 Low percentage single braid 70070 30040 342 High percentage single braid Low percentage quad (GI 5750) 74710 35371 357 High percentage dual braid or quad Pin diameter of .032 optimized for data applications such as IEEE 802.4 and 802.7, MAP or Carrier Band reves o- * Suitable for use where FD P550 type 0326 | connectors are recommended __ es * Gold plated pin available to assure f ot the highest data integrity ene | secerrs * Tin plated pin available for compatibility < to ectric with tin sockets * Bright alloy finish on body resists corrosive atmospheres found in many factories and is fully compatibie with tin or nickel connectors * Contoured end of pin eliminates the socket damage during mating associated with inserting cut end of cable center conductor into female port Use crimp too! G-CRT-188 * See Appendix, Figure 10B, for cable trim dimensions Request installation sheet G-1400-178 for use with General Instrument 5750 cable GF-6-AHS/USA ee * Advanced design crimp ring accommodates a wide range of cable sizes from low percentage single braid to foil braid/foil braid while providing excellent electrical shielding and mechanical retention 8-92 THD - we, All brass construction features annealed crimp ring woe for reliable crimp with no fracturing sa ' wn pe ee ect Cadmium plated with chromate conversion coating ACCEPTS for good corrosion resistance oom le DIELECTAIC * See Appendix, Figure 10C, for cable trim dimensions Use .360 hex crimp (Example: G-CRT-USA) GF-6-AHS TYPE GF-6-AHS/312 GF-6-AHS/342 GF- 6-AHS/357 NS-3044-5f Me HEX The attached crimp ring provides excellent 7 818-82 THD electrical shielding and mechanical retention mo Brass body features annealed crimp ring 37 | for reliable crimp with no fracturing tu fh Cadmium with chromate conversion coating for good corrosion resistance * Add SN to part for bright acid tin plating 8B * See Appendix, Figure 10, for cable trim dimensions t+ NS-3044-5 has left handed threads GILBERT ENGINEERING CO., INC. AS POST OFFICE BOX 23189 5310 W. CAMELBACK ROAD TEL: 602-245-1050 FAX: 602-931-0684 & PHOENIX, AZ 85063-3189 USA GLENDALE, AZ 85301-7597 USA TEL: 800-528-5567 FAX: 800-344-6358 76 HEX