FUJITSU MEDIA DEVICE DATA SHEET DS04-23121-6E ASSP Mobile Communication Systems Piezoelectric SAW Dual BPF (700 MHz to 2000 MHz) G5/G6 Series (L2/D2 type) DESCRIPTION As the market for mobile phones continues to increase, so has demand for smaller size, lighter weight and lower cost. Dual band phones, such as GSM + PCN and AMPS + PCS, are rising in popularity. To support these requests, Fujitsu has developed a new series of SAW dual filter (G5/G6 series) incorporating two SAW filters in one package. For example, Fujitsu can offer a GSM Rx filter and a PCN Rx filter of combination in small 3.8 mm x 3.8 mm package. The G5/G6 series of SAW dual filter applies to the 700 MHz to 2000 MHz, frequency range, and are available in two package types : 2 input/2 output type or 1 input/2 output (2 input/1 output) . FEATURES * Two functions are incorporated in one package (Useful for multi-band phone and multi-mode phone) * Ultra compact and light package (3.8 mm x 3.8 mm or 3.0 mm x 3.0 mm) * 50 of input/output impedance * Low insertion * 2 in/2 out and 1 in/2 out (2 in/1 out) of package types are available PACKAGES < G5CN > < G6CN > < G6CH > G5/G6 Series PIN ASSIGNMENTS < BOTTOM VIEW > G5CN package G6CN package 1 2 G6CH package 1 3 4 8 7 6 4 5 PIN DESCRIPTIONS 2 Description 1 IN Input Pin (Common) 2 GND Ground Pin 3 GND Ground Pin 4 GND Ground Pin 5 OUT Filter 2 Output Pin 6 GND Ground Pin 7 OUT Filter 1 Output Pin 8 GND Ground Pin * 2 in/2 out type Pin Pin name 3 8 7 * 1 in/2 out type Pin Pin name 2 Description 1 IN Filter 1 Input Pin 2 GND Ground Pin 3 IN Filter 2 Input Pin 4 GND Ground Pin 5 OUT Filter 2 Output Pin 6 GND Ground Pin 7 OUT Filter 1 Output Pin 8 GND Ground Pin 6 5 G5/G6 Series INTERNAL BLOCK DIAGRAM 1 in/2 out type 1 2 in/2 out type BPF1 7 1 BPF1 7 BPF2 5 3 BPF2 5 1 - 7 : Pin number 3 G5/G6 Series ABSOLUTE MAXIMUM RATINGS Parameter Rating Symbol Operating temperature Storage temperature Unit Min Max Ta -30 +85 C Tstg -40 +100 C Input power PIN Input DC voltage Depends on each design. See "ELECTRICAL CHARACTERISTICS". -5 +5 V WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. RECOMMENDED OPERATING CONDITIONS Parameter Symbol Operating temperature Ta Value Min Max -30 +85 Unit C WARNING: The recommended operating conditions are required in order to ensure the normal operation of the piezoelectric device. All of the device's electrical characteristics are warranted when the device is operated within these ranges. Always use piezoelectric devices within their recommended operating conditionranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand. STANDARD DEVICES No. Part number System 1 FAR-G5CN-877M50-D292 PDC800 Rx 2 FAR-G6CH-1G8425-L218 EGSM + PCN Rx Frequency (MHz) 810 MHz to 843 MHz 870 MHz to 885 MHz Input/ Part symbol Output 92 1 in/ 2 out 3.0 mm x 3.0 mm 18 2 in/ 2 out 3.8 mm x 3.8 mm Low insertion loss type 27 2 in/ 2 out 3.8 mm x 3.8 mm 28 2 in/ 2 out 3.8 mm x 3.8 mm 33 2 in/ 2 out 3.0 mm x 3.0 mm 925 MHz to 960 MHz 1805 MHz to 1880 MHz 4 3 FAR-G6CH-1G8425-L227B EGSM + PCN Rx 4 FAR-G6CH-1G9600-L228A EGSM + PCS Rx 5 FAR-G6CN-1G8950-L233 PCS Tx Split 925 MHz to 960 MHz 1805 MHz to 1880 MHz 925 MHz to 960 MHz 1930 MHz to 1990 MHz Low 1850 MHz to 1880 MHz High 1880 MHz to 1910 MHz Remarks G5/G6 Series ELECTRICAL CHARACTERISTICS AND TYPICAL FREQUENCY RESPONSE Filter 2 Filter 1 1. PDC800 (Rx) 1 in/2 out Part number : FAR-G5CN-877M50-D292 Parameter Condition Insertion loss Pass-band ripple (Ta = -30 C to +85 C) Value Unit Min Typ Max 810 MHz to 843 MHz 2.6 4.0 dB 810 MHz to 843 MHz 0.8 2.2 dB 550 MHz to 585 MHz 40 47 dB 585 MHz to 650 MHz 28 32 dB 650 MHz to 780 MHz 20 24 dB 865 MHz to 889 MHz 16 19 dB 889 MHz to 900 MHz 19 23 dB 900 MHz to 1070 MHz 20 27 dB 1070 MHz to 1110 MHz 30 33 dB Pass-band VSWR (Return loss) 810 MHz to 828 MHz (6.5) 2.1 (9.0) 2.8 (dB) Input power 810 MHz to 828 MHz 15 dBm Insertion loss 870 MHz to 885 MHz 2.7 3.5 dB Pass-band ripple 870 MHz to 885 MHz 0.2 1.0 dB 610 MHz to 630 MHz 40 46 dB 630 MHz to 700 MHz 35 40 dB 700 MHz to 840 MHz 20 27 dB 925 MHz to 960 MHz 15 19 dB 960 MHz to 1130 MHz 30 37 dB 1130 MHz to 1145 MHz 32 35 dB Pass-band VSWR (Return loss) 870 MHz to 885 MHz (7.4) 1.9 (10.2) 2.5 (dB) Input power 870 MHz to 885 MHz 15 dBm Absolute stop-band attenuation Absolute stop-band attenuation Remarks (Continued) 5 G5/G6 Series (Continued) Part number : FAR-G5CN-877M50-D292 Filter 1 (Pass-band : 810 MHz to 843 MHz) S21 5 dB/ REF 0 dB 1 : -2.3702 dB S21 5 dB/ 826.500 000 MHz 2 : -18.27 dB 877.5 MHz 3 : -28.707 dB 1.5 GHz 4 : -24.673 dB 2 GHz 809.930 000 MHz 2 : -2.4868 dB 843 MHz 3 : -20.89 dB 870 MHz 4 : -19.238 dB 885 MHz 2 1 : -2.3932 dB REF 0 dB 1 1 2 4 3 4 3 START 500.000 000 MHz STOP 1 200.000 000 MHz START .030 000 MHz STOP 3 000.000 000 MHz Filter 2 (Pass-band : 870 MHz to 885 MHz) S21 5 dB/ REF 0 dB 4 1 : -33.929 dB S21 5 dB/ 877.500 000 MHz 1 : -37.593 dB 826.5 MHz 3 : -32.036 dB 1.5 GHz 4 : -27.043 dB 2 GHz 809.930 000 MHz 3 2 : -2.7945 dB REF 0 dB 2 2 : -34.35 dB 843 MHz 3 : -2.4709 dB 870 MHz 4 : -2.4825 dB 885 MHz 1 4 3 2 1 START 500.000 000 MHz 6 STOP 1 200.000 000 MHz START .030 000 MHz STOP 3 000.000 000 MHz G5/G6 Series 2. EGSM Rx + PCN Rx (2 in/2 out) Part number : FAR-G6CH-1G8425-L218 Parameter Condition Filter 1 Value Unit Remarks 2.5 dB Ta = +20 C to +30 C 2.2 3.0 dB Ta = -30 C to +85 C Min Typ Max Insertion loss 925 MHz to 960 MHz Pass-band ripple 925 MHz to 960 MHz 0.8 1.6 dB DC to 880 MHz 16 18 dB 10 dB Ta = +20 C to +30 C 5 17 dB Ta = -30 C to +85 C 980 MHz to 1200 MHz 13 22 dB 1375 MHz to 1410 MHz 20 24 dB 1850 MHz to 1920 MHz 25 32 dB 2775 MHz to 2880 MHz 15 18 dB Pass-band VSWR (Return loss) 925 MHz to 960 MHz (7.4) 2.1 (9.0) 2.5 (dB) Input power 925 MHz to 960 MHz 23 dBm 3.2 dB Ta = +20 C to +30 C 2.7 3.7 dB Ta = -30 C to +85 C 880 MHz to 915 MHz Filter 2 (Ta = -30 C to +85 C) Absolute stop-band attenuation Insertion loss 1805 MHz to 1880 MHz Pass-band ripple 1805 MHz to 1880 MHz 1.1 2.1 dB DC to 1300 MHz 17 18 dB 1355 MHz to 1430 MHz 18 20 dB 1500 MHz to 1710 MHz 20 22 dB 17 dB Ta = +20 C to +30 C 8 25 dB Ta = -30 C to +85 C 1920 MHz to 1980 MHz 15 29 dB 3610 MHz to 3760 MHz 15 17 dB 5415 MHz to 5640 MHz 12 17 dB Pass-band VSWR (Return loss) 1805 MHz to 1880 MHz (7.7) 2.0 (9.5) 2.4 (dB) Input power 1805 MHz to 1880 MHz 13 dBm Absolute stop-band attenuation 1710 MHz to 1785 MHz (Continued) 7 G5/G6 Series (Continued) Part number : FAR-G6CH-1G8425-L218 Filter 1 (Pass-band : 925 MHz to 960 MHz) S21 5 dB/ REF 0 dB 1 : -29.514 dB S21 5 dB/ REF 0 dB 471.250 000 MHz 880.000 000 MHz 4 3 2 2 : -17.088 dB 915 MHz 3 : -2.2237 dB 925 MHz 4 : -1.6333 dB 960 MHz 2 1 : -18.68 dB 1 4 1 3 CENTER 900.000 000 MHz SPAN 300.000 000 MHz START .010 000 MHz 2 : -1.7528 dB 942.5 MHz 3 : -33.969 dB 1.885 GHz 4 : -18.422 dB 2.827 GHz STOP 3 000.000 000 MHz Filter 2 (Pass-band : 1805 MHz to 1880 MHz) S21 5 dB/ REF 0 dB 1 : -35.275 dB S21 5 dB/ REF 0 dB 1 710.000 000 MHz 3 4 2 : -36.285 dB 1.785 GHz 3 : -2.7392 dB 1.805 GHz 4 : -2.0623 dB 1.88 GHz 921.250 000 MHz 2 1 3 2 8 4 2 : -1.9977 dB 1.842 GHz 3 : -18.487 dB 3.685 GHz 4 : -19.316 dB 5.527 GHz 1 CENTER 1 900.000 000 MHz 1 : -18.215 dB SPAN 600.000 000 MHz START .010 000 MHz STOP 6 000.000 000 MHz G5/G6 Series Filter 2 Filter 1 3. EGSM Rx + PCN Rx (2 in/2 out) Part number : FAR-G6CH-1G8425-L227B Parameter Condition Insertion loss 925 MHz to 960 MHz Pass-band ripple (Ta = -30 C to +85 C) Value Unit Remarks 3.0 dB Ta = +20 C to +30 C 2.7 3.7 dB Ta = -30 C to +85 C 1.1 2.1 dB DC to 880 MHz 22 23 dB 880 MHz to 905 MHz 28 32 dB 11 32 dB Ta = -30 C to +30 C 7 dB Ta = +30 C to +85 C 980 MHz to 1200 MHz 20 30 dB 1375 MHz to 1410 MHz 30 38 dB 1850 MHz to 1920 MHz 20 26 dB Pass-band VSWR (Return loss) 925 MHz to 960 MHz (7.7) 1.9 (10.2) 2.4 (dB) Input power 925 MHz to 960 MHz 23 dBm 3.5 dB Ta = +20 C to +30 C 2.8 3.9 dB Ta = -30 C to +85 C Absolute stop-band attenuation Min Typ Max 925 MHz to 960 MHz 905 MHz to 915 MHz Insertion loss 1805 MHz to 1880 MHz Pass-band ripple 1805 MHz to 1880 MHz 1.3 2.4 dB DC to 1300 MHz 17 18 dB 1355 MHz to 1430 MHz 17 19 dB 1600 MHz to 1710 MHz 20 22 dB 20 25 dB Ta = -30 C to +30 C 10 dB Ta = +30 C to +85 C 1920 MHz to 1980 MHz 20 29 dB 3610 MHz to 3760 MHz 15 19 dB Pass-band VSWR (Return loss) 1805 MHz to 1880 MHz (7.7) 1.9 (10.2) 2.4 (dB) Input power 1805 MHz to 1880 MHz 13 dBm Absolute stop-band attenuation 1710 MHz to 1785 MHz (Continued) 9 G5/G6 Series (Continued) Part number : FAR-G6CH-1G8425-L227B Filter 1 (Pass-band : 925 MHz to 960 MHz) S21 5 dB/ REF 0 dB 1 1 : -2.61 dB S21 1 5 dB/ REF 0 dB 942.500 000 MHz 925.000 000 MHz 2 2 : -1.933 dB 960 MHz 3 : -41.175 dB 880 MHz 4 : -36.157 dB 915 MHz 5 : -30.825 dB 980 MHz 5 4 5 4 2 3 3 CENTER 950.000 000 MHz 1 : -1.7667 dB SPAN 300.000 000 MHz START .010 000 MHz 2 : -36.855 dB 1.2 GHz 3 : -43.206 dB 1.392 GHz 4 : -26.605 dB 1.885 GHz 5 : -18.698 dB 3 GHz STOP 3 000.000 000 MHz Filter 2 (Pass-band : 1805 MHz to 1880 MHz) S21 5 dB/ 1 REF 0 dB 1 : -2.7525 dB 1 805.000 000 MHz 2 : -1.9922 dB 1.88 GHz 3 : -32.682 dB 1.71 GHz 4 : -35.12 dB 1.785 GHz 5 : -32.384 dB 1.92 GHz 2 S21 5 dB/ 1 REF 0 dB 1 : -1.8206 dB 1 842.500 000 MHz 2 : -18.336 dB 942.5 MHz 3 : -23.109 dB 1.6 GHz 4 : -29.253 dB 3 GHz 5 : -19.832 dB 3.685 GHz 5 2 3 4 5 3 4 CENTER 1 900.000 000 MHz 10 SPAN 600.000 000 MHz START 50.000 000 MHz STOP 4 000.000 000 MHz G5/G6 Series 4. EGSM Rx + PCN Rx (2 in/2 out) Part number : FAR-G6CH-1G9600-L228A Filter 1 Parameter Condition Value Unit Remarks 3.0 dB Ta = +20 C to +30 C 2.7 3.7 dB Ta = -30 C to +85 C Min Typ Max Insertion loss 925 MHz to 960 MHz Pass-band ripple 925 MHz to 960 MHz 1.1 2.1 dB DC to 880 MHz 22 23 dB 880 MHz to 905 MHz 28 32 dB 11 32 dB Ta = -30 C to +30 C 7 dB Ta = +30 C to +85 C 20 dB Ta = -30 C to +20 C 25 32 dB Ta = +20 C to +85 C 1375 MHz to 1410 MHz 30 38 dB 1850 MHz to 1920 MHz 20 26 dB Pass-band VSWR (Return loss) 925 MHz to 960 MHz (7.7) 1.9 (10.2) 2.4 (dB) Input power 925 MHz to 960 MHz 23 dBm 3.9 dB Ta = +20 C to +30 C 3.5 4.2 dB Ta = -30 C to +85 C Absolute stop-band attenuation 905 MHz to 915 MHz 980 MHz to 1200 MHz Insertion loss 1930 MHz to 1990 MHz Pass-band ripple 1930 MHz to 1990 MHz 1.9 2.6 dB DC to 1850 MHz 20 22 dB 7 10 dB Ta = -30 C to +30 C 5 dB Ta = +30 C to +85 C 5 dB Ta = -30 C to +20 C 6 10 dB Ta = +20 C to +85 C 2500 MHz to 2700 MHz 20 25 dB 3000 MHz to 4000 MHz 15 18 dB Pass-band VSWR (Return loss) 1930 MHz to 1990 MHz (7.0) 2.1 (9.0) 2.6 (dB) Input power 1930 MHz to 1990 MHz 13 dBm 1850 MHz to 1910 MHz Filter 2 (Ta = -30 C to +85 C) Absolute stop-band attenuation 2010 MHz to 2100 MHz (Continued) 11 G5/G6 Series (Continued) Part number : FAR-G6CH-1G9600-L228A Filter 1 (Pass-band : 925 MHz to 960 MHz) S21 5 dB/ 1 1 : -2.598 dB REF 0 dB S21 1 5 dB/ REF 0 dB 942.500 000 MHz 925.000 000 MHz 2 1 : -1.7667 dB 2 : -2.0124 dB 960 MHz 3 : -42.756 dB 880 MHz 4 : -29.411 dB 915 MHz 5 : -33.886 dB 980 MHz 5 4 4 5 2 3 2 : -36.855 dB 1.2 GHz 3 : -43.206 dB 1.392 GHz 4 : -26.605 dB 1.885 GHz 5 : -18.698 dB 3 GHz 3 CENTER 950.000 000 MHz SPAN 300.000 000 MHz START .010 000 MHz STOP 3 000.000 000 MHz Filter 2 (Pass-band : 1930 MHz to 1990 MHz) S21 5 dB/ 1 : -3.4467 dB REF 0 dB 1 5 dB/ 1 930.000 000 MHz 2 4 S21 2 : -2.882 dB 1.99 GHz 3 : -27.201 dB 1.85 GHz 5 4 : -10.67 dB 1.91 GHz 5 : -10.63 dB 2.01 GHz 5 2 3 3 CENTER 1 900.000 000 MHz 12 1 : -1.8342 dB REF 0 dB 1 1 960.000 000 MHz SPAN 600.000 000 MHz START .010 000 MHz 4 2 : -23.502 dB 1 GHz 3 : -30.967 dB 1.5 GHz 4 : -25.266 dB 2.7 GHz 5 : -18.573 dB 4 GHz STOP 4 000.000 000 MHz G5/G6 Series Filter 2 Filter 1 5. PCS Tx split band (low band + high band dual) (2 in/2 out) Part number : FAR-G6CN-1G8950-L233 Parameter Condition Insertion loss Pass-band ripple (Ta = -30 C to +85 C) Value Unit Min Typ Max 1850 MHz to 1880 MHz 2.1 3.2 dB 1850 MHz to 1880 MHz 0.4 1.5 dB DC to 1700 MHz 20 23 dB 1700 MHz to 1760 MHz 28 38 dB 1930 MHz to 1960 MHz 30 38 dB 2000 MHz to 2100 MHz 30 35 dB 2100 MHz to 3000 MHz 25 35 dB Pass-band VSWR (Return loss) 1850 MHz to 1880 MHz (8.5) 1.4 (15.6) 2.2 (dB) Input power 1850 MHz to 1880 MHz 13 dBm Insertion loss 1880 MHz to 1910 MHz 2.4 3.2 dB Pass-band ripple 1880 MHz to 1910 MHz 0.6 1.5 dB DC to 1700 MHz 21 24 dB 1700 MHz to 1760 MHz 28 37 dB 1800 MHz to 1830 MHz 15 26 dB 1960 MHz to 1990 MHz 30 37 dB 2000 MHz to 2100 MHz 30 38 dB 2100 MHz to 3000 MHz 25 32 dB Pass-band VSWR (Return loss) 1880 MHz to 1910 MHz (8.5) 1.5 (14.0) 2.2 (dB) Input power 1880 MHz to 1910 MHz 13 dBm Absolute stop-band attenuation Absolute stop-band attenuation Remarks (Continued) 13 G5/G6 Series (Continued) Part number : FAR-G6CN-1G8950-L233 Filter 1 (Pass-band : 1850 MHz to 1880 MHz) S21 5 dB/ 1 1 : -1.9431 dB REF 0 dB S21 5 dB/ 1 : -1.8127 dB REF 0 dB 1 1 850.000 000 MHz 1 865.000 000 MHz 2 : -2.0299 dB 1.88 GHz 3 : -38.911 dB 1.93 GHz 4 : -48.145 dB 1.96 GHz 5 : -44.14 dB 1.76 GHz 2 : -23.224 dB 750 MHz 3 : -38.618 dB 1.7 GHz 4 : -35.44 dB 2.1 GHz 5 : -39.19 dB 2.5 GHz 2 2 4 3 3 5 5 CENTER 1 880.000 000 MHz 4 SPAN 600.000 000 MHz START .030 000 MHz STOP 3 000.000 000 MHz Filter 2 (Pass-band : 1880 MHz to 1910 MHz) S21 5 dB/ 1 : -2.3225 dB REF 0 dB 1 1 880.000 000 MHz 2 2 : -2.1745 dB 1.91 GHz 3 : -37.657 dB 1.96 GHz 4 : -41.046 dB 1.99 GHz 5 : -26.235 dB 1.83 GHz S21 5 dB/ 1 : -1.986 dB REF 0 dB 1 1 895.000 000 MHz 2 : -24.234 dB 750 MHz 3 : -39.277 dB 1.7 GHz 4 : -38.691 dB 2.1 GHz 5 : -34.735 dB 2.5 GHz 2 5 5 3 3 4 CENTER 1 880.000 000 MHz 14 SPAN 600.000 000 MHz START .030 000 MHz 4 STOP 3 000.000 000 MHz G5/G6 Series MEASURMENT CIRCUIT ` * 1 in/2 out type (G5CN filters) < Filter 1 > < Filter 2 > IN OUT 1 IN 1 7 7 8 6 4 8 6 4 2 3 5 2 3 * 5 OUT * 50 50 *: FAR-G5CN-877M50-D292; 10 nH 1 - 8 : Pin number * 2 in/2 out type (G6CH filters) < Filter 1 > < Filter 2 > IN OUT 1 3 8 6 2 4 IN OUT 7 3 5 1 50 50 5 8 6 2 4 7 50 50 1 - 8 : Pin number RECOMMENDED EXTARNAL CIRCUIT OF 1 IN/2 OUT TYPE (G5CN filters) IN 1 7 OUT1 5 OUT2 * 2 3 4 6 8 *: FAR-G5CN-877M50-D292; 10 nH 15 G5/G6 Series PART NUMBER DESIGNATION [Designation example] < G5CN FILTER > FAR-G5CN- -D2 (1) (2) (3) (1) Frequency : This specifies the nominal center frequency of higher frequency side using six alphanumeric. M (for MHz) indicates the decimal point. [Example] 877M50 877.5 MHz (2) Part symbol : 01 to 99 (Numbers specified by Fujitsu) (3) Packing : Y; 1 k pcs/reel X ; 5 k pcs/reel < G6CH FILTER > FAR-G6CH- -L2 (1) (2) (3) (1) Frequency : This specifies the nominal center frequency of higher frequency side using six alphanumeric. G (for GHz) indicates the decimal point. [Example] 1G8800 1.88 GHz (2) Part symbol : 01 to 99 (Numbers specified by Fujitsu) (3) Packing : T; 1 k pcs/reel R; 3 k pcs/reel < G6CN FILTER > FAR-G6CN- -L2 (1) (2) (3) (1) Frequency : This specifies the nominal center frequency of higher frequency side using six alphanumeric. G (for GHz) indicates the decimal point. [Example] 1G8950 1.895 GHz (2) Part symbol : 01 to 99 (Numbers specified by Fujitsu) (3) Packing : Y; 1 k pcs/reel X ; 5 k pcs/reel MARKING Logo Date code Index 16 Part symbol F 19 B 35 Lot number G5/G6 Series PACKAGE DIMENSIONS < G5CN package > < G6CN package > < G6CH package > 3.8 3.6 3.6 3.8 3.0 3.0 4 - R0.3 1.6 Max 1.2 Max 4 - R0.2 1.27 1.27 7 6 1.2 4 5 1.58 0.95 8 7 3 4 6 5 0.64 8 2 1.0 0.6 1.9 0.6 0.6 3 0.75 1.2 2 0.75 1 1 1.0 4 - R0.2 1.2 0.64 Dimensions in mm. 17 G5/G6 Series RECOMMENDED LAND PATTERN < G5CN package > < G6CN package > < G6CH package > 3.0 1.4 0.6 0.7 1.0 3.8 0.7 1.6 1.5 1.2 3.0 1.5 0.95 3.8 0.70 1.20 0.4 1.20 0.2 0.2 1.0 0.75 0.7 0.4 1.27 1.27 Dimensions in mm. 18 G5/G6 Series PACKING 1. Reel Dimensions B 1.5 Min A 80 12.8 Min 20.2 Min R 0.58 C < G5CN filter > < G6CN filter > Type A B C Volume Y 250 9.5 0.5 13.8 Max 1 k pcs X 250 9.5 0.5 13.8 Max 5 k pcs B C Volume 250 + 2.0 12.4 - 0.0 18.4 Max 1 k pcs 330 12.4 +- 2.0 0.0 18.4 Max 3 k pcs < G6CH filter > Type A T R Dimensions in mm. 2. Packing Style Reel side Rulling side 1 PIN Rulling side 19 G5/G6 Series 3. Tape Dimensions < G5CN filters > < G6CN filters > 0.3 0.05 1.0 Min 3.3 0.1 8.0 0.2 1.5 +0.1 -0.0 3.3 0.1 2.0 0.05 3.5 0.05 1.75 0.1 4.0 0.1 1.3 0.1 8.0 0.1 < G6CH filters > +0.1 -0.0 0.3 4.2 0.1 5.5 0.1 1.5 4.2 0.1 12.0 0.3 2.0 0.1 1.75 0.1 4.0 0.1 1.6 8.0 0.1 1.8 Dimensions in mm. 4. Peel strength of top cover tape Peel off by the force of 0.1 N to 1.0 N under the condition at the right. (Conforms to EIA.) Direction of pulling Speed 300 mm/min 165 to 180 Embossment carrier type tape 20 G5/G6 Series RECOMMENDED REFLOW PROFILE 240 Temperature (C) 10 s Heating rate 1C/s to 4 C/s 210 Air cooling 60 s Pre-Heating 150 60 s 90 s Time (s) NOTE Mass-produced product order is accepted by a unit of 1000. 21 G5/G6 Series FUJITSU MEDIA DEVICES LIMITED All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU MEDIA DEVICES sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MEDIA DEVICES electronic device; FUJITSU MEDIA DEVICES does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MEDIA DEVICES assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MEDIA DEVICES or any third party or does FUJITSU MEDIA DEVICES warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MEDIA DEVICES assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that FUJITSU MEDIA DEVICES will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any electronic devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. F0308 FUJITSU LIMITED Printed in Japan