VW 2x30 AC Controller Modules VRSM VDSM VRRM VDRM V V 1200 1400 1600 1200 1400 1600 1 Type VW2x30-12io1 VW2x30-14io1 VW2x30-16io1 7 Conditions IRMS ITRMS ITAVM TC = 85C; (per phase) TVJ = TVJM TC = 85C; (180 sine ; per thyristor) ITSM TVJ = 45C VR = 0 (di/dt)cr 2 5 4 1 Symbol I2t IRMS = 2x 30 A VRRM = 1200-1600 V 6 30 22 14 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 200 210 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 180 190 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 200 190 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 160 150 A2s A2s TVJ = TVJM repetitive, IT = 45 A f =50 Hz, tP =200 s VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/s 100 A/s 500 A/s 2 (dv/dt)cr TVJ = TVJM VDR = /3 VDRM RGK = ; method 1 (linear voltage rise) PGM TVJ = TVJM IT = ITAVM 1000 tp = 30 s tp = 300 s V/s PGAVM 10 5 0.5 W W W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C 3000 3600 V~ V~ VISOL 50/60 Hz, RMS IISOL < 1 mA t = 1 min t=1s Md Mounting torque (M5) Weight typ. 5 9 10 9 10 Maximum Ratings 4 2 6 7 Features * Thyristor controller for AC (circuit W2C acc. to IEC) for mains frequency * Soldering connections for PCB mounting * Isolation voltage 3600 V~ * Planar passivated chips * UL applied Applications * Switching and control of three phase AC circuits * Softstart AC motor controller * Solid state switches * Light and temperature control Advantages * Easy to mount with two screws * Space and weight savings * Improved temperature and power cycling 2-2.5/18-22 Nm/lb.in. 35 g Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions (c) 2008 IXYS All rights reserved 20080828a 1-3 G VW 2x30 Symbol Conditions Characteristic Values ID, IR TVJ = TVJM; VR = VRRM; VD = VDRM < 5 VT IT < 1.81 V VT0 rT For power-loss calculations only 0.8 25 V m VGT VD = 6 V = 45 A; TVJ = 25C 10 mA TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C < < < < 1.5 1.6 100 200 V V mA mA VD = 2/3 VDRM < < 0.2 5 V mA 450 mA 1: IGT, TVJ = 125C 2: IGT, TVJ = 25C 3: IGT, TVJ = -40C V VG 3 2 1 6 5 1 IGT VD = 6 V VGD IGD TVJ = TVJM IL TVJ = 25C; tP = 10 s IG = 0.45 A; diG/dt = 0.45 A/s < IH TVJ = 25C; VD = 6 V; RGK = < 200 mA 1 tgd TVJ = 25C; VD = 1/2VDRM IG = 0.45 A; diG/dt = 0.45 A/s < 2 s Fig. 1 Gate trigger characteristics tq TVJ = TVJM; IT = 20 A; tP = 200 s; di/dt = -10 A/s VR = 100 V; dv/dt = 15 V/s; VD = 2/3VDRM typ. 150 s RthJC RthJK dS dA a 4 4: PGAV = 0.5 W 5: PGM = 5 W 6: PGM = 10 W IGD, TVJ = 125C 0.1 10 100 mA 1000 IG 1000 TVJ = 25C per thyristor; DC per module per thyristor; DC per module 1.7 0.43 2.0 0.5 K/W K/W K/W K/W Creeping distance on surface Creepage distance in air Max. allowable acceleration 12.7 9.4 50 mm mm m/s2 s tgd typ. 100 Limit 10 1 10 100 IG Dimensions in mm (1 mm = 0.0394") mA 1000 Fig. 2 Gate trigger delay time G 140 50 A 45 TVJ = 125C A IF 40 120 IRMS 35 100 30 TK = 85C 80 25 60 20 15 TVJ =125C 40 TVJ = 25C 10 20 5 0 0.0 0.5 1.0 1.5 VT Fig. 3 Forward current vs. voltage drop per leg IXYS reserves the right to change limits, test conditions and dimensions (c) 2008 IXYS All rights reserved V 2.0 0 0.01 VW2x30 0.1 s 1 10 t Fig. 4 Rated RMS current vs. time (360 conduction) 20080828a 2-3 VW 2x30 250 100 W 90 Ptot 50 Hz 80 % VRRM A 200 80 RthKA K/W 70 ITSM 0.5 1 1.5 2 3 4 6 60 50 40 150 TVJ = 45C 100 30 Circuit W3C2 1x VW2x30 20 10 0 0.001 0 0 5 10 15 20 25 IRMS 30 A 0 25 50 75 100 TA 125 C 150 0.01 s 0.1 1 t Fig. 6 Surge overload current Fig. 5 Load current capability for two phase AC controller 1000 100 W 90 Ptot TVJ = 125C 50 VR = 0V A2s 80 RthKA K/W 70 2 It 0.5 1 1.5 2 3 4 6 60 50 40 300 30 200 TVJ = 45C Circuit B2C 2x VW2x30 20 10 TVJ = 125C 100 0 0 5 10 15 20 25 30 A 0 ITAVM 25 50 75 100 TA t Fig. 7 Power dissipation vs. direct output current and ambient temperature cyclo converter, four quadrant operation Fig. 8 It vs. time (per thyristor) 2.5 K/W 2.0 ZthJK Constants for ZthJK calculation: 30 Rthi / (K/W) ti / (s) DC 0.023 0.053 1.524 0.4 1.5 G 25 A ITAVM 0.002 0.013 0.16 0.98 DC 180 sin 120 60 30 20 15 RthJK for various conduction angles: 1.0 0.5 0.0 0.001 ms 10 1 125 C 150 0.01 0.1 RthJK / (K/W) d: 2 2.01 2.14 2.21 2.27 DC 180 120 60 30 1 s t Fig. 9 Transient thermal impedance junction to heatsink (per thyristor) IXYS reserves the right to change limits, test conditions and dimensions (c) 2008 IXYS All rights reserved 10 5 0 10 0 25 50 75 100 125 C TC Fig. 10 Maximum forward current at case temperature 20080828a 3-3