SURFACE MOUNT DISPLAY APSC03-41YWW YELLOW Features Description !0.3 The Yellow source color devices are made with INCH DIGIT HEIGHT. !LOW CURRENT OPERATION. !EXCELLENT CHARACTER APPEARANCE. Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. !I.C. COMPATIBLE. !MECHANICALLY !WHITE RUGGED. FACE,WHITE SEGMENT. !PACKAGE:1100PCS/REEL. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAB0117 APPROVED : J. Lu REV NO: V.2 CHECKED :Joe Lee DATE: APR/17/2002 DRAWN:Y.G PAGE: 1 OF 5 Selection Guide P ar t N o . Dic e APSC03-41YWW Iv (m c d ) @ 10 m A L en s Ty p e YELLOW (GaAsP/GaP) Min . Ty p . 0.8 2.29 WHITE DIFFUSED D es c r i p t i o n Common Cathode,Rt. Hand Decimal Electrical / Optical Characteristics at TA=25C Sy m b o l P ar am et er D ev i c e peak Peak Wavelength Yellow D Dominate Wavelength 1/2 Ty p . Max . Un its Tes t Co n d it io n s 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA V R = 5V Absolute Maximum Ratings at TA=25C P ar am et er Yello w Un its Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB0117 APPROVED : J. Lu REV NO: V.2 CHECKED :Joe Lee DATE: APR/17/2002 DRAWN:Y.G PAGE: 2 OF 5 Yellow APSC03-41YWW SPEC NO: DSAB0117 APPROVED : J. Lu REV NO: V.2 CHECKED :Joe Lee DATE: APR/17/2002 DRAWN:Y.G PAGE: 3 OF 5 APSC03-41YWW SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) SPEC NO: DSAB0117 APPROVED : J. Lu REV NO: V.2 CHECKED :Joe Lee DATE: APR/17/2002 DRAWN:Y.G PAGE: 4 OF 5 Tape Specification (Units : mm) SPEC NO: DSAB0117 APPROVED : J. Lu REV NO: V.2 CHECKED :Joe Lee DATE: APR/17/2002 DRAWN:Y.G PAGE: 5 OF 5