Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
88
RM699B
Slimline Interface Relays
DATA SUBJECT TO CHANGE WITHOUT NOTICE
• Cover width only 5,0 mm
• Sealed for soldering and cleaning
• Applications: for PLC's, industrial machinery, time relays, counters, temperature adjusters,
measurement instruments, office equipment, etc.
RM699B
Contact Data
Number and type of contacts SPDT SPDT
Contact material AgSnO2AgSnO2/ Au 3µm
Max. switching voltage 400 V AC / 250 V DC 30V AC / 36 V DC
Min. switching voltage 10 V 5V
Rated load AC1 6 A / 250 V AC 0.05 A / 30V AC
DC1 6 A / 24 V DC; 0.15 A / 250 V DC 0.05 A / 36 V DC
Min. switching current 100 mA 10mA
Max. inrush current 10 A 20 ms 0.1 A 20 ms
Rated current 6A 0.05 A
Max. breaking capacity AC1 1500 VA 1.2 VA
Min. breaking capacity 1 W 0.05 W
Contact resistance ≤ 100 mΩ 100 mA. 24 V ≤ 30 mΩ 10 mA. 5 V
Max. operating frequency
• at rated load AC1 360 cycles/hour 360 cycles/hour
• no load 72000 cycles/hour 72000 cycles/hour
Coil Data
Rated voltage DC 5 ... 60 V
Must release voltage DC: ≥ 0.05 Un
Operating range of supply voltage see table above
Rated power consumption DC 0.17 W 5 ... 24 V; 0.217 W 48. 60 V
Insulation
Insulation rated voltage 250 V AC
Overvoltage category III
Dielectric strength
• between coil and contacts 4 000 V AC type of insulation: reinforced
• contact clearance 1 000 V AC type of clearance: micro-disconnection
Contact - coil distance
• clearance ≥ 6 mm
• creepage ≥ 8 mm
General data
Operating / release time (typical values) 8 ms / 4 ms
Electrical life (number of cycles)
• resistive AC1 the SPST (1 NO) and SPST (1 NC) contact loaded (bilateral load): see Fig. 1
the SPST (1 NO) contact loaded: > 3 x 104; 6 A. 250 V AC
Mechanical life (cycles) > 107
Dimensions (L x W x H) 28 x 5 x 15 mm
Weight 6 g
Ambient temperature
• storage -40...+85 °C
• operating -40...+85 °C
Cover protection category IP 64 PN-EN 60529
Environmental protection RTIII PN-EN 116000-3
Shock resistance 5 g
Vibration resistance 5 g 10...55 Hz
Solder bath temperature max. 260 °C
Soldering time max. 5 s
RM699B
for PCB mounting
or plug-in sockets
E105728
RM699B SPDT DC coil / 6A rated current
Part Number Coil Voltage Coil Type Coil Resistance Coil Operating Range
DC at 20°C in Ωmin. (at 20°C) max. (at 55°C)
RM699BV-3011-85-1005 5 DC 147 3.75 7.5
RM699BV-3011-85-1012 12 DC 848 9.0 18.0
RM699BV-3011-85-1024 24 DC 3390 18.0 36.0
RM699BV-3011-85-1048 48 DC 10600 36.0 72.0
RM699BV-3011-85-1060 60 DC 20500 45.0 90.0
RM699B SPDT gold plated contacts DC coil / 0.05A rated current
Part Number Coil Voltage Coil Type Coil Resistance Coil Operating Range
DC at 20°C in Ωmin. (at 20°C) max. (at 55°C)
RM699BV-3211-85-1005 5 DC 147 3.75 7.5
RM699BV-3211-85-1012 12 DC 848 9.0 18.0
RM699BV-3211-85-1024 24 DC 3390 18.0 36.0
RM699BV-3211-85-1048 48 DC 10600 36.0 72.0
RM699BV-3211-85-1060 60 DC 20500 45.0 90.0
Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 89
RM699B
Slimline Interface Relays
Description of Fig. 3
A - relations between make voltage and ambient temperature at no load on contacts. Coil temperature and ambient temperature
are equal before coil energizing. Make voltage is not higher than the value read on Y axis (multiplication of rated voltage).
B - relations between make voltage and ambient temperature after initial coil heating up with 1.1 Un, at continues load of In on
contacts. Make voltage is not higher than the value read on Y axis (multiplication of rated voltage).
1. 2 - values on Y axis represent allowed overvoltage on coil at certain ambient temperature and
contact load: 1 - no load; 2 - rated load
1
150.5
3.78
0.5
0.5
1
16.38
28
15
3.5
5.04 5.04
0.9
A1 A2 12 11 14
SPDT
3 × Ø 1.3
11.343.78 5.04 1.95.04
2.54 × 2.54
2×Ø1
1.2
Max. DC resistive load breaking capacity Fig. 2 Fig. 3
DC current [A]
10
0.1
0 100 200 250
DC1
DC voltage [V]
LOAD CHARTS
DIMENSIONS PIN OUTS
CONNECTION DIAGRAMS
Socket Ordering Codes
Part Number Part Number Rated input Power of
Screw Clamp Terminals Spring Clamp Terminals voltage Un input circuit
PI6W-1PS-6VDC PI6WB-1PS-6VDC 5 VDC 0.3 W
PI6W-1PS-12/24VDC PI6WB-1PS-12/24VDC 12/24 VDC 0.2 W
PI6W-1PS-36VDC PI6WB-1PS-36VDC 36 VDC 0.3 W
PI6W-1PS-48VDC PI6WB-1PS-48VDC 48 VDC 0.4 W
PI6W-1PS-60VDC PI6WB-1PS-60VDC 60 VDC 0.5 W
PI6W-1PS-24VAC/DC PI6WB-1PS-24VAC/DC 24 VAC/DC 0.5VA / 0.4W
PI6W-1PS-42VAC/DC PI6WB-1PS-42VAC/DC 42 VAC/DC 0.5VA / 0.4W
PI6W-1PS-115VAC/DC PI6WB-1PS-115VAC/DC 115 VAC/DC 1.2VA / 1.2W
PI6W-1PS-230VAC/DC PI6WB-1PS-230VAC/DC 230 VAC/DC 1.2VA / 1.2W
For relay socket combinations see pages 96-97 (screw clamp terminals) and pages 100-101 (spring clamp terminals).
DATA SUBJECT TO CHANGE WITHOUT NOTICE
