TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803
Website: http: //www.microsemi.com
T4-LDS-0171 Rev. 1 (101129) Page 2 of 3
ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted)
Parameters / Test Conditions Symbol Min. Max. Unit
ON CHARACTERISTICS (3)
Forward-Current Transfe r Ratio
hFE
IC = 1.0Adc, VCE = 3.0Vdc 500
IC = 4.0Adc, VCE = 3.0Vdc 750 18,000
IC = 8.0Adc, VCE = 3.0Vdc 100
Collector-Emitter Saturation Voltage VCE(sat)
Vdc
IC = 4.0Adc, IB = 16mAdc
IC = 8.0Adc, IB = 80mAdc 2.0
3.0
Base-Emitter Saturation Voltage VBE(sat)
Vdc
IC = 8.0Adc, IB = 80mAdc 4.0
Base-Emitter Voltage VBE(on)
Vdc
IC = 4.0Adc, VCE = 3.0Vdc 2.8
DYNAMIC CHARACTERISTICS
Parameters / Test Conditions Symbol Min. Max. Unit
Magnitude of Common Emitter Small–Signal Short-Circuit
Forward Current Transfer Ratio |hfe|
IC = 3.0Adc, VCE = 3.0Vdc, f = 1.0MHz 25 350
Small-Signal Short-Circuit Forward Current Tran sfer Ratio hfe
IC = 3.0Adc, VCE = 3.0Vdc, f = 1.0KHz 300
Output Capacitance Cobo 200 pF
VCB = 10Vdc, IE = 0, 100kHz ≤ f ≤ 1.0MHz
SWITCHING CHARACTERISTICS
Parameters / Test Conditions Symbol Min. Max. Unit
Turn-On Time
VCC = 30Vdc; IC = 4.0Adc; IB1 = 16mAdc ton 2.0 µs
Turn-Off Time
VCC = 30Vdc; IC = 4.0Adc; IB1 = IB2 = 16mAdc toff 8.0 µs
SAFE OPERATING AREA
DC Test
TC = 25°C, 1 cycle, t = 1.0s
Test 1
VCE = 8.0Vdc, IC = 8.0Adc
Test 2
VCE = 20Vdc, IC = 2.0Adc
Test 3
VCE = 60Vdc, IC = 100mAdc
VCE = 80Vdc, IC = 100mAdc
2N6300
2N6301
(2) Pulse Test: Pulse Width = 300μs, Duty Cycle ≤ 2.0%.