SPECIFICATION * Supplier : Samsung electro-mechanics * Samsung P/N : CL21A106KACLRNB * Product : Multi-layer Ceramic Capacitor * Descriptiont : CAP, 10uF, 25.0V, 10%, X5R, 0805 A. Samsung Part Number CL Series Size Dielectric Capacitance Capacitance tolerance Rated Voltage Thickness 21 A 106 K A Samsung Multi-layer Ceramic Capacitor 0805 (inch code) L: 2.0 0.2 X5R 10 uF 10 % 25 V 0.85 0.1 mm C L R mm Inner electrode Termination Plating Product Special Packaging N W: B 1.25 0.2 mm Ni Cu Sn 100% (Pb Free) Size tole Change code Reserved for future use Bulk B. Samsung Reliablility Test and Judgement condition Capacitance Tan (DF) Insulation Resistance Appearance Withstanding Voltage Temperature Characterisitcs Adhesive Strength of Termination Bending Strength Solderability Resistance to Soldering heat Performance Test condition Within specified tolerance 10.2Vrms 1k10% 0.10 max. 10,000Mohm or 100MohmxuF Rated Voltage 60~120 sec. Whichever Is Smaller No abnormal exterior appearance Microscope (x10) 250% of the rated voltage No dielectric breakdown or mechanical breakdown X5R (From -55 to 85, Capacitance change shoud be within 15%) No peeling shall be occur on the 500gF, for 101 sec. terminal electrode Capacitance change : within 12.5% Bending to the limit (1mm) with 1.0mm/sec. More than 75% of terminal surface is 1) Sn63Pb37 solder to be soldered newly 2355, 50.5sec. 2) SnAg3.0Cu0.5 solder 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Capacitance change : within 7.5% Solder pot : 2705, 101sec. Tan , IR : initial spec. Vibration Test Humidity Moisture Resistance High Temperature Resistance Temperature Cycling Performance Capacitance change : within 5% Tan , IR : initial spec. Test condition Amplitude : 1.5mm From 10Hz to 55Hz (return : 1min.) 2hours x 3 direction (x, y, z) within 12.5% 402, 90~95%RH, 500+12/-0hrs Capacitance change : Tan : 0.2 max IR : 12.5*uF or Over Capacitance change : within 12.5% Tan : 0.2 max IR : 12.5*uF or Over Capacitance change : within 25% Tan : 0.2 max IR : 25*uF or Over Capacitance change : within 7.5% Tan , IR : initial spec. With rated voltage 402, 90~95%RH, 500+12/-0hrs With 100% of the rated voltage Max. operating temperature 1000+48/-0hrs 1 cycle condition Min. operating temperatur -55 Max. operating temperature 85 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.