VS-10BQ040-M3
www.vishay.com Vishay Semiconductors
Revision: 29-May-12 1Document Number: 93335
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Schottky Rectifier, 1.0 A
FEATURES
Low forward voltage drop
Guard ring for enhanced ruggedness and long
term reliability
Small foot print, surface mountable
High frequency operation
Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
The VS-10BQ040-M3 surface mount Schottky rectifier has
been designed for applications requiring low forward drop
and very small foot prints on PC boards. Typical
applications are in disk drives, switching power supplies,
converters, freewheeling diodes, battery charging, and
reverse battery protection.
PRODUCT SUMMARY
Package SMB
IF(AV) 1.0 A
VR40 V
VF at IF0.38 V
IRM 9 mA at 125 °C
TJ max. 150 °C
Diode variation Single die
EAS 3.0 mJ
Cathode Anode
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
IF(AV) Rectangular waveform 1.0 A
VRRM 40 V
IFSM tp = 5 μs sine 430 A
VF1.0 Apk, TJ = 125 °C 0.38 V
TJRange - 55 to 150 °C
VOLTAGE RATINGS
PARAMETER SYMBOL VS-10BQ040-M3 UNITS
Maximum DC reverse voltage VR40 V
Maximum working peak reverse voltage VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current IF(AV) 50 % duty cycle at TL = 122 °C, rectangular waveform 1.0 A
Maximum peak one cycle
non-repetitive surge current IFSM
5 μs sine or 3 μs rect. pulse Following any rated
load condition and with
rated VRRM applied
430
A
10 ms sine or 6 ms rect. pulse 40
Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 1 A, L = 6 mH 3.0 mJ
Repetitive avalanche current IAR
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical 1.0 A
VS-10BQ040-M3
www.vishay.com Vishay Semiconductors
Revision: 29-May-12 2Document Number: 93335
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Pulse width = 300 μs, duty cycle = 2 %
Notes
(1) thermal runaway condition for a diode on its own heatsink
(2) Mounted 1" square PCB
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum forward voltage drop
See fig. 1 VFM (1)
1 A TJ = 25 °C 0.45
V
2 A 0.52
1 A TJ = 125 °C 0.38
2 A 0.50
Maximum reverse leakage current
See fig. 2 IRM
TJ = 25 °C VR = Rated VR
0.1 mA
TJ = 125 °C 9.0
Typical junction capacitance CTVR = 5 VDC, (test signal range 100 kHz to 1 MHz), 25 °C 115 pF
Typical series inductance LSMeasured lead to lead 5 mm from package body 2.0 nH
Maximum voltage rate of charge dV/dt Rated VR10 000 V/μs
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction and storage
temperature range TJ (1), TStg - 55 to 150 °C
Maximum thermal resistance,
junction to lead RthJL (2) DC operation 36
°C/W
Maximum thermal resistance,
junction to ambient RthJA 80
Approximate weight 0.10 g
0.003 oz.
Marking device Case style SMB (similar DO-214AA) 1F
dPtot
dTJ
------------- 1
RthJA
--------------<
VS-10BQ040-M3
www.vishay.com Vishay Semiconductors
Revision: 29-May-12 3Document Number: 93335
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Reverse Current vs. Reverse Voltage
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
VFM - Forward Voltage Drop (V)
IF - Instantaneous Forward Current (A)
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0.1
1
10
TJ = 25 °C
TJ = 125 °C
TJ = 150 °C
V
R
-
Reverse Voltage (V)
I
R
- Reverse Current (mA)
0 5 10 15 20 25 30 35 40 45
0.00010
0.0010
0.010
0.10
1.0
10
100
25 °C
125 °C
150 °C
100 °C
75 °C
50 °C
1000
100
VR - Reverse Voltage (V)
CT - Junction Capacitance (pF)
0
10
4010 20 30
Z
thJC - Thermal Impedance (°C/W)
t1 - Rectangular Pulse Duration (s)
0.1
1
10
1
00
0.00001 0.0001 0.001 0.01 0.1 1 10 100
Single pulse
(thermal resistance)
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
2
t
1
t
P
DM
Notes:
1. Duty factor D = t1/ t2.
2. Peak TJ = Pdm x ZthJC + Tc.
VS-10BQ040-M3
www.vishay.com Vishay Semiconductors
Revision: 29-May-12 4Document Number: 93335
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 5 - Maximum Average Forward Current vs.
Allowable Lead Temperature
Fig. 6 - Maximum Average Forward Dissipation vs.
Average Forward Current
Fig. 7 - Maximum Peak Surge Forward Current vs. Pulse Duration
Note
(1) Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
I
F(AV)
-
Average
Forward Current (A)
Allowable Case Temperature (°C)
0.0 0.3 0.6 0.9 1.2 1.5
70
80
90
100
110
120
130
140
150
160
DC
Square wave (D = 0.50)
80 % rated VR applied
see note (1)
D = 0.75
D = 0.20
D = 0.25
D = 0.33
D = 0.50
IF(AV) - Average Forward Current (A)
Allowable Case Temperature (°C)
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
0
0.2
0.4
0.6
0.8
DC
D = 0.75
D = 0.20
D = 0.25
D = 0.33
D = 0.50
RMS limit
tp - Square Wave Pulse Duration (µs)
100
1000
IFSM - Non-Repetitive Surge Current (A)
10 100 1000 10 000
10
At any rated load condition and
with rated VRRM applied
following surge
VS-10BQ040-M3
www.vishay.com Vishay Semiconductors
Revision: 29-May-12 5Document Number: 93335
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORDERING INFORMATION TABLE
ORDERING INFORMATION (Example)
PREFERRED P/N PREFERRED PACKAGE CODE MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION
VS-10BQ040-M3/5BT 5BT 3200 13" diameter plastic tape and reel
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95401
Part marking information www.vishay.com/doc?95403
Packaging information www.vishay.com/doc?95404
2- Current rating
3- B = SMB
4- Q = Schottky “Q” series
5- Voltage rating (040 = 40 V)
1- Vishay Semiconductors product
Device code
51 32 4 6
VS- 10 B Q 040 -M3
- Environmental digit:
-M3 = Halogen-free, RoHS compliant and terminations lead (Pb)-free
6
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 13-Jun-16 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
VS-10BQ040-M3/5BT