[ /Title (CD74 HC367 , CD74 HCT36 7, CD74 HC368 , CD74 HCT36 8) /Subject (High Speed CD54/74HC367, CD54/74HCT367, CD54/74HC368, CD74HCT368 Data sheet acquired from Harris Semiconductor SCHS181B November 1997 - Revised April 2002 High Speed CMOS Logic Hex Buffer/Line Driver, Three-State Non-Inverting and Inverting Features driving large bus capacitances. These circuits possess the low power dissipation of CMOS circuitry, yet have speeds comparable to low power Schottky TTL circuits. Both circuits are capable of driving up to 15 low power Schottky inputs. * Buffered Inputs * High Current Bus Driver Outputs The 'HC367 and 'HCT367 are non-inverting buffers, whereas the 'HC368 and CD74HCT368 are inverting buffers. These devices have two output enables, one enable (OE1) controls 4 gates and the other (OE2) controls the remaining 2 gates. * Two Independent Three-State Enable Controls * Typical Propagation Delay tPLH, tPHL = 8ns at VCC = 5V, CL = 15pF, TA = 25oC * Fanout (Over Temperature Range) - Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads - Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads The 'HCT367 and CD74HCT368 logic families are speed, function and pin compatible with the standard LS logic family. Ordering Information * Wide Operating Temperature Range . . . -55oC to 125oC PART NUMBER * Balanced Propagation Delay and Transition Times * Significant Power Reduction Compared to LSTTL Logic ICs * HC Types - 2V to 6V Operation - High Noise Immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5V * HCT Types - 4.5V to 5.5V Operation - Direct LSTTL Input Logic Compatibility, VIL= 0.8V (Max), VIH = 2V (Min) - CMOS Input Compatibility, Il 1A at VOL, VOH TEMP. RANGE (oC) PACKAGE CD54HC367F3A -55 to 125 16 Ld CERDIP CD74HC367E -55 to 125 16 Ld PDIP CD74HC367M -55 to 125 16 Ld SOIC CD54HCT367F3A -55 to 125 16 Ld CERDIP CD74HCT367E -55 to 125 16 Ld PDIP CD74HCT367M -55 to 125 16 Ld SOIC CD54HC368F -55 to 125 16 Ld CERDIP CD54HC368F3A -55 to 125 16 Ld CERDIP CD74HC368M -55 to 125 16 Ld SOIC CD74HCT368E -55 to 125 16 Ld PDIP CD74HCT368M -55 to 125 16 Ld SOIC NOTES: 1. When ordering, use the entire part number. Add the suffix 96 to obtain the variant in the tape and reel. 2. Wafer or die for this part number is available which meets all electrical specifications. Please contact your local TI sales office or customer service for ordering information. Description The 'HC367, 'HCT367, 'HC368, and CD74HCT368 silicon gate CMOS three-state buffers are general purpose high-speed non-inverting and inverting buffers. They have high drive current outputs which enable high speed operation even when Pinouts CD54HC367, CD54HCT367 (CERDIP) CD74HC367, CD74HCT367 (PDIP, SOIC) TOP VIEW CD54HC368 (CERDIP) CD74HC368, CD74HCT368 (PDIP, SOIC) TOP VIEW OE1 1 16 VCC OE1 1 16 VCC 1A 2 15 OE2 1A 2 15 OE2 1Y 3 14 6A 1Y 3 14 6A 2A 4 13 6Y 2A 4 13 6Y 2Y 5 12 5A 2Y 5 12 5A 3A 6 11 5Y 3A 6 11 5Y 3Y 7 10 4A 3Y 7 10 4A GND 8 9 4Y GND 8 9 4Y CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures. Copyright (c) 2002, Texas Instruments Incorporated 1 CD54/74HC367, CD54/74HCT367, CD54/74HC368, CD74HCT368 Functional Diagrams HC367, HCT367 OE1 1A 1Y 2A 2Y HC368, CD74HCT368 1 16 2 15 3 14 4 13 5 12 6 11 3A 3Y GND VCC OE1 OE2 1A 6A 1Y 6Y 2A 5A 2Y 5Y 3A 4A 3Y 4Y GND 10 7 9 8 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 OUTPUTS (Y) OE A HC/HCT367 HC/HCT368 L L L H L H H L H X (Z) (Z) NOTE: H = High Voltage Level L = Low Voltage Level X = Don't Care Z = High Impedance (OFF) State 2 OE2 6A 6Y 5A 5Y 4A TRUTH TABLE INPUTS VCC 4Y CD54/74HC367, CD54/74HCT367, CD54/74HC368, CD74HCT368 Logic Diagram VCC 16 ONE OF SIX IDENTICAL CIRCUITS 2 1A 3 (NOTE) 1Y GND 8 1 OE1 4 15 5 2A 2Y OE2 6 7 3A 3Y 10 4A 9 4Y 12 5A 11 5Y 14 6A 13 6Y NOTE: Inverter not included in HC/HCT367. FIGURE 1. LOGIC DIAGRAM FOR THE HC/HCT367 AND HC/HCT368 (OUTPUTS FOR HC/HCT367 ARE COMPLEMENTS OF THOSE SHOWN, i.e., 1Y, 2Y, ETC.) 3 CD54/74HC367, CD54/74HCT367, CD54/74HC368, CD74HCT368 Absolute Maximum Ratings Thermal Information DC Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 7V DC Input Diode Current, IIK For VI < -0.5V or VI > VCC + 0.5V . . . . . . . . . . . . . . . . . . . . . .20mA DC Output Diode Current, IOK For VO < -0.5V or VO > VCC + 0.5V . . . . . . . . . . . . . . . . . . . .20mA DC Drain Current, per Output, IO For -0.5V < VO < VCC + 0.5V. . . . . . . . . . . . . . . . . . . . . . . . . .35mA DC VCC or Ground Current, ICC . . . . . . . . . . . . . . . . . . . . . . . . .50mA Thermal Resistance (Typical, Note 3) JA (oC/W) PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 150oC Maximum Storage Temperature Range . . . . . . . . . .-65oC to 150oC Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300oC (SOIC - Lead Tips Only) Operating Conditions Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC Supply Voltage Range, VCC HC Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2V to 6V HCT Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5V to 5.5V DC Input or Output Voltage, VI, VO . . . . . . . . . . . . . . . . . 0V to VCC Input Rise and Fall Time 2V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000ns (Max) 4.5V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500ns (Max) 6V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400ns (Max) CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 3. JA is measured with the component mounted on an evaluation PC board in free air. DC Electrical Specifications TEST CONDITIONS SYMBOL VI (V) High Level Input Voltage VIH - Low Level Input Voltage VIL High Level Output Voltage CMOS Loads VOH PARAMETER 25oC IO (mA) VCC (V) MIN TYP -40oC TO 85oC MAX MIN MAX -55oC TO 125oC MIN MAX UNITS HC TYPES - VIH or VIL High Level Output Voltage TTL Loads Low Level Output Voltage CMOS Loads VOL VIH or VIL Low Level Output Voltage TTL Loads - - 2 1.5 - - 1.5 - 1.5 - V 4.5 3.15 - - 3.15 - 3.15 - V 6 4.2 - - 4.2 - 4.2 - V 2 - - 0.5 - 0.5 - 0.5 V 4.5 - - 1.35 - 1.35 - 1.35 V 6 - - 1.8 - 1.8 - 1.8 V -0.02 2 1.9 - - 1.9 - 1.9 - V -0.02 4.5 4.4 - - 4.4 - 4.4 - V -0.02 6 5.9 - - 5.9 - 5.9 - V -6 4.5 3.98 - - 3.84 - 3.7 - V -7.8 6 5.48 - - 5.34 - 5.2 - V 0.02 2 - - 0.1 - 0.1 - 0.1 V 0.02 4.5 - - 0.1 - 0.1 - 0.1 V 0.02 6 - - 0.1 - 0.1 - 0.1 V 6 4.5 - - 0.26 - 0.33 - 0.4 V 7.8 6 - - 0.26 - 0.33 - 0.4 V II VCC or GND - 6 - - 0.1 - 1 - 1 A Quiescent Device Current ICC VCC or GND 0 6 - - 8 - 80 - 160 A Three-State Leakage Current IOZ VIL or VIH VO = VCC or GND 6 - - 0.5 - 5.0 - 10 A Input Leakage Current 4 CD54/74HC367, CD54/74HCT367, CD54/74HC368, CD74HCT368 DC Electrical Specifications (Continued) TEST CONDITIONS SYMBOL VI (V) High Level Input Voltage VIH - - Low Level Input Voltage VIL - High Level Output Voltage CMOS Loads VOH VIH or VIL PARAMETER 25oC -40oC TO 85oC -55oC TO 125oC MIN TYP MAX MIN MAX MIN MAX UNITS 4.5 to 5.5 2 - - 2 - 2 - V - 4.5 to 5.5 - - 0.8 - 0.8 - 0.8 V -0.02 4.5 4.4 - - 4.4 - 4.4 - V -4 4.5 3.98 - - 3.84 - 3.7 - V 0.02 4.5 - - 0.1 - 0.1 - 0.1 V 4 4.5 - - 0.26 - 0.33 - 0.4 V IO (mA) VCC (V) HCT TYPES High Level Output Voltage TTL Loads Low Level Output Voltage CMOS Loads VOL VIH or VIL Low Level Output Voltage TTL Loads II VCC to GND 0 5.5 - - 0.1 - 1 - 1 A ICC VCC or GND 0 5.5 - - 8 - 80 - 160 A Additional Quiescent Device Current Per Input Pin: 1 Unit Load (Note 4) ICC VCC -2.1 - 4.5 to 5.5 - 100 360 - 450 - 490 A Three-State Leakage Current IOZ VIL or VIH VO = VCC or GND 5.5 - - 0.5 - 5.0 - 10 A Input Leakage Current Quiescent Device Current NOTE: 4. For dual-supply systems theoretical worst case (VI = 2.4V, VCC = 5.5V) specification is 1.8mA. HCT Input Loading Table INPUT UNIT LOADS OE1 0.6 All Others 0.55 NOTE: Unit Load is ICC limit specified in DC Electrical Specifications table, e.g., 360A max at 25oC. Switching Specifications PARAMETER Input tr, tf = 6ns SYMBOL TEST CONDITIONS tPLH, tPHL CL = 50pF 25oC -40oC TO 85oC -55oC TO 125oC VCC (V) TYP MAX MAX MAX UNITS 2 - 105 130 160 ns 4.5 - 21 26 32 ns 6 - 18 24 27 ns 5 8 - - - ns HC TYPES Propagation Delay, Data to Outputs HC/HCT367 CL = 15pF 5 CD54/74HC367, CD54/74HCT367, CD54/74HC368, CD74HCT368 Switching Specifications PARAMETER Propagation Delay, Data to Outputs HC/HCT368 Propagation Delay, Output Enable and Disable to Outputs Output Transition Time Input tr, tf = 6ns (Continued) SYMBOL TEST CONDITIONS tPLH, tPHL CL = 50pF tPLH, tPHL tTLH, tTHL 25oC -40oC TO 85oC -55oC TO 125oC VCC (V) TYP MAX MAX MAX UNITS 2 - 105 130 160 ns 4.5 - 21 26 32 ns 6 - 18 24 27 ns CL = 15pF 5 9 - - - ns CL = 50pF 2 - 150 190 225 ns 4.5 - 30 38 45 ns 6 - 26 33 38 ns CL = 15pF 5 12 - - - ns CL = 50pF 2 - 60 75 90 ns 4.5 - 12 15 18 ns 6 - 10 13 15 ns Input Capacitance CI - - - 10 10 10 pF Three-State Output Capacitance CO - - - 20 20 20 pF Power Dissipation Capacitance (Notes 5, 6) CPD - 5 40 - - - pF CL = 50pF 4.5 - 25 31 38 ns CL = 15pF 5 9 - - - ns CL = 50pF 4.5 - 30 38 45 ns CL = 15pF 5 11 - - - ns CL = 50pF 4.5 - 35 44 53 ns CL = 15pF 5 14 - - - ns CL = 50pF 4.5 - 12 15 18 ns HCT TYPES Propagation Delay, Data to Outputs HC/HCT367 tPLH, tPHL Propagation Delay, Data to Outputs HC/HCT368 tPLH, tPHL Propagation Delay, Output Enable and Disable to Outputs tPLH, tPHL Output Transition Time tTLH, tTHL Input Capacitance CIN - - - 10 10 10 pF Three-State Capacitance CO - - - 20 20 20 pF Power Dissipation Capacitance (Notes 5, 6) CPD - 5 42 - - - pF NOTES: 5. CPD is used to determine the dynamic power consumption, per buffer. 6. PD = VCC2fi (CPD + CL) where fi = Input Frequency, CL = Output Load Capacitance, VCC = Supply Voltage. 6 CD54/74HC367, CD54/74HCT367, CD54/74HC368, CD74HCT368 Test Circuits and Waveforms tr = 6ns tf = 6ns 90% 50% 10% INPUT GND tTLH tPHL 6ns 10% 2.7 1.3 OUTPUT LOW TO OFF 90% OUTPUT HIGH TO OFF 50% OUTPUTS DISABLED FIGURE 4. HC THREE-STATE PROPAGATION DELAY WAVEFORM OTHER INPUTS TIED HIGH OR LOW OUTPUT DISABLE IC WITH THREESTATE OUTPUT GND 1.3V tPZH 90% OUTPUTS ENABLED OUTPUTS ENABLED 0.3 10% tPHZ tPZH 3V tPZL tPLZ 50% OUTPUTS ENABLED 6ns GND 10% tPHZ tf OUTPUT DISABLE tPZL tPLZ OUTPUT HIGH TO OFF 6ns tr VCC 90% tPLH FIGURE 3. HCT TRANSITION TIMES AND PROPAGATION DELAY TIMES, COMBINATION LOGIC 6ns OUTPUT LOW TO OFF 1.3V 10% INVERTING OUTPUT FIGURE 2. HC TRANSITION TIMES AND PROPAGATION DELAY TIMES, COMBINATION LOGIC 50% tTLH 90% tPLH tPHL GND tTHL 90% 50% 10% INVERTING OUTPUT 3V 2.7V 1.3V 0.3V INPUT tTHL OUTPUT DISABLE tf = 6ns tr = 6ns VCC 1.3V OUTPUTS DISABLED OUTPUTS ENABLED FIGURE 5. HCT THREE-STATE PROPAGATION DELAY WAVEFORM OUTPUT RL = 1k CL 50pF VCC FOR tPLZ AND tPZL GND FOR tPHZ AND tPZH NOTE: Open drain waveforms tPLZ and tPZL are the same as those for three-state shown on the left. The test circuit is Output RL = 1k to VCC, CL = 50pF. FIGURE 6. HC AND HCT THREE-STATE PROPAGATION DELAY TEST CIRCUIT 7 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2002, Texas Instruments Incorporated