Rev. D 2004/04/02 10 | 9 | 7 | 6 | 5 | 4 3 | 2 | 39501 3952X & 3954X SERIES 3950X SERIES 5 00mm HEADERS 3953X SERIES 3.50mm HEADERS 5.08mm HEADERS 5.00mm FIXED 9130 typ 9180 Wp. O51 9150 1p 063 063 3.50 L 5,08 a8 4 5.00 L 00 io py 497 TYP. 2 3951X SERIES 3954X SERIES 3954X SERIES 3.8/mm HEADERS 5.00mm FIXED 5.08mm FIXED 6 g 120 g 40 6) 0 TYP. oe TYP. 3.81 , 5.00 L 5,08 L 750 TYP. 797 TYP. 700 TYP. : B a = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS HIR NGLE S =] |symaois| (UNLESS SPECIFIED) MM/IN INCH CieR Ole AYGN BEE mm INCH | DRAWN BY DATE TITLE FS= RigW-0 ZPraAcesie---_[z--- Ic. YoRK 2006/08/25). RECOMMENDED PCB PAYOUT TOLERANCES use fr 3 PLACES|+--- _[+--- __ |CHECKED BY DATE FOR ESE TERMINAL BLOCKS NOTES: QES L/BINWV-0 epiacesit--- [+-- J. MACNEIL 2006/08/25 MM TOL INCH TOL e Si 5S su 1PLACE |--- |--- APPROVED BY DATE hola 4. REFER TO INDIVIDUAL PRODUCT SALES 0-6 #0.25 | 0-.24 #010 ||AaSz 3 ANGULAR f===> WJ. MACNEIL 2006/08/25, Rolex =MOLEX INCORPORATED DRAWINGS FOR "B DIMENSION. >6-30 +0.40 .24-1.18 +.016 YS 3 a e MATERIAL NO. DOCUMENT NO. SHEET NO. 2 DOES NOT APPLY TO DUAL LEVEL HEADERS. [35-470 0.50 | 118-476 ]+.020 ||Gia eee DRAFT WHERE, APPLICABLE -- SD-39501-002 OF 1 . rua SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 3. TYP. = TYPICAL. >120 +0.80_| >4.76 +031 B1 a WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION Tb_frame_B_P_ME_T 9 7 | 6 | 5 | 4 | 3 | 2 110 9 8 7 6 5 4 | 3 2 1 molex 3950X Als SEE NOTES 3 & 4 M2.5 THREAD DIM A 9.2 = DIM C 36 A 6.9 2.9 = 27 ae ||N 35 {|| SPECIFICATIONS: 4 8 1. Material: 2.6 A. Body: PA66, UL 94V-0 10 B. Terminal: Brass - Tin plated 80 60 C. Threaded Insert: Brass 031 SQ. 031 2. Electrical rating: 300V, 8A 8.0 350 TOLERANCES : oN 22k MM TOL INCH TOL 3. Max Torque: 1.59 in.lbs. (0.18NM) 34 138 025 10-24 O10 4, Minimum insert retention: 22 Ibf (98N) = Te CH ETE CUn = 7 5. Operating temperature: -40C to +105C 5 720 050 1B. Z 76 ~020 6. Max. soldering temp: 260C (500F) for 5 seconds - - 7. DIM A (overall lengthi= (N x P) + 103 oe eo Ah 76 __ 1 +03 . overa engini= WN X ry + W.5mm = ) Jquauty] GENERAL TOLERANCES DIMENSION STYLE SCALI DESIGN UNITS Cl THIRD ANGLE 8. DIM B (circuit lengthl= (N - 4) x P S 3S) |symBois}| (UNLESS SPECIFIED) MM/IN 41 INCH PROJECTION 9. DIM C (mounting holes)= (B + 8.6mm) <=E 5 mm INCH __| DRAWN BY DATE TITLE 40. P (PITCH) = sSOnn 138") * ag Siz\W-0 [cPLacesie--- [4--- _LROTHAUS 12/6/05 3.5MM, EURO HEADER => " P9 E 3 PLACES |+--- _|t--- _|CHECKED BY DATE RIGHT ANGLE, MOUNTING 11. N = Number of positions available 2 through 20 W = - | \W/=0 7 PLACES|t--- |+--- C. YORK 01/06/06 ENDS . _ _| Qk 5] wt i --- +--- APPROVED BY DATE Ce a eee ooo tor PTH int cee Ss" see NGULAR ES fel MOLEX INCORPORATED . ee rawing su ~ or into i S35 ee MATERIAL NO. DOCUMENT NO. SHEET NO. 14. Dims. shown are for reference only > < 2=o DRAFT WHERE APPLICABLE] SEE SHEET 2 | SD-39506-001 1 OF 2 i OW <t SIZE) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B1 i WITHIN DIMENSIONS B INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_B_P_AM_T 9 8 7 | 6 5 4 | 3 | 2 1 Rev. D 2004/06/2810 9 8 7 6 5 4 3 2 39506 Material Numbers Dimensional Inform ation Black Green 100% Tin 30 u" Gald 100% Tin 30 u" Gald Circuit Printing Options Printing Optiens Printing Options Printing Options Dim A Dim B Dim.C Description None 410A 1A None 10A 11A None 410A 1A None 10A 11A mm | inch | mm | inch | mm | inch 3.5mm, Euro Header, Right Angle, tv ounting Ends 2 395061002 | 395061102 | 395061202 | 395061502 | 395061602 | 395061702 | 395068002 | 395066102 | 395066202 | 395066502 | 395086602 | 395066702 | 17.30 | 0881 | 350 | 0138 | 12.10 | 0476 3.6mm, Euro Header, Right Angle, f ounting Ends 3 395061003 395061103 395061203 395061503 395061603 395061 703 395066003 395066103 395.066 203 39506 6 503 395066 603 398066703 20.80 | 0.819 7.00 0.276 | 15.60 | 0614 3.5mm, Euro Header, Right Angle, M ounting Ends 4 395061004 | 395061104 | 395061204 | 395061504 | 305061604 | 395061704 | 3a5068004 | 395066104 | 345066204 | 395066504 | 395066604 | 385066704 | 24.30 | 0957 | 10.50 | 0443 | 19.10 | 0752 3.5mm, Euro Header, Right Angle, fv ounting Ends 5 395061005 | 395061105 | 395061205 | 395061505 | 395061605 | 395061705 | 395066005 | 395066105 | 395066205 | 395066505 | 395066605 | 395066705 | 27.80 | 1.094 | 14.00 | 0451 | 22.60 | 0.890 3.5mm, Euro Header, Right Angle, ounting Ends 6 395061006 | 395061106 | 395061206 | 395061506 | 395061608 | 395061706 | 395068008 | 395066106 | 395066206 | 395066506 | 395066606 | 395066706 | 31.30 | 1.232 | 17.50 | asa | 26.10 | 1.028 3.5mm, Euro Header, Right Angle. fi ounting Ends 7 395061007 | 395061107 | 3a5061207 | 395061507 | 3a5061607 | 395061707 | 395066007 | 395066107 | 395066207 | 395066507 | 395086607 | 35066707 | 34.80 | 1.370 | 21.00 | o827 | 29.60 | 1.165 3.4mm, Euro Header, Right Angle, f ounting Ends 8 395061008 395061108 395061208 395061508 395061608 395061 708 395066008 395066 108 395066 208 39506 6 508 395066 608 385066708 36.30 | 1.506 | 24.50 | 0.963 | 33.10 | 1.303 3.5mm, Euro Header, Right Angle. Mounting Ends 9 395061009 | 395061109 | 305061209 | 3a5061509 | 3a5061609 | 395061709 | 395068009 | 395066109 | 395066209 | 3as5a66509 | 3e5066609 | sa5a66709 | 41.80 | 1646 | 28.00 | 1.102 | 36.60 | 1.441 3.5mm, Euro Header, Right Angle, fv ounting Ends 10 395061010 | 395061110 | 395061210 | 395061510 | 3a5061610 | 395061710 | 395066010 | 395066110 | 395066210 | 395066510 | 395066610 | 395066710 | 45.30 | 1.783 | 31.50 | 1.240 | 40.10 | 1.579 3.5mm, Euro Header, Right Angle, f ounting Ends 11 395061011 3950611411 395061214 395061514 395061614 395061714 395066014 395066111 395066214 395066514 395066611 385066711 48.80 | 1.921 | 36.00 | 1578 | 43.60 | 4.717 3.5mm, Euro Header, Right Angle, f ounting Ends 12 395061012 395061112 395061212 395061512 395061612 395061712 395066012 395066112 395066212 395066512 395066 612 385066712 52.30 | 2059 | 38.50 | 1516 | 47.10 | 1.654 3.5mm, Euro Header, Right Angle. Mounting Ends 13 395061013 | 395061113 | 305061213 | 305061513 | 305061613 | 395061713 | 395068013 | 395066113 | 395066213 | 395066513 | 395066613 | 395066713 [55.80 | 2197 | 42.00 | 1.854 | 50.60 | 1.992 3.5mm, Euro Header, Right Angle, fv ounting Ends 14 395061014 | 395061114 | 395061214 | 395061514 | 3a5061614 | 395061714 | 3950668014 | 395066114 | 395066214 | 395066514 | 395066614 | 395066714 | 5930 | 2335 | 45.50 | 1.791 | 54.10 | 2.130 3.4mm, Euro Header, Right Angle, ty ounting Ends 15 395061015 | 395061115 | 395061215 | 395061515 | 395061615 | 395061715 | 398066015 | 395066115 | 395066215 | s9m066515 | 3g5086615 | sas066715 | 62.80 | 2472 | 49.00 | 1.929 | 57.60 | 2.268 3.5mm, Euro Header, Right Angle, ounting Ends 16 395061016 | 395061116 | 395061216 | 395061516 | 395061616 | 395061716 | 3950668016 | 395066116 | 395066216 | 395066516 | 395066616 | 395066716 | 66.30 | 2610 | 52.50 | 2067 | 61.10 | 2.408 3.5mm, Euro Header, Right Angle, f ounting Ends 17 395061017 395061117 395061217 395061517 395061617 395061717 395066017 395066117 395066217 395066517 395066 617 3Q5066717 69.80 | 2.748 | 56.00 | 2205 | 64.60 | 2.543 3.5mm, Euro Header, Right Angle. ft! ounting Ends 18 395061018 395061118 395061218 395061518 395061618 395061718 395066015 395066118 395066218 395066518 395066618 385066718 73.30 | 2886 | 59.50 | 2543 | 68.10 | 2.684 3.5mm, Euro Header, Right Angle, f ounting Ends 19 395061019 | 395061119 | 395061219 | 395061519 | 395061619 | 3eso61719 | 395066019 | 395066119 | 395066219 | 395066519 | 395066619 | s95a66719 | 76.80 | 3024 | 63.00 | 2480 | 71.60 | 2.819 3.5mm, Euro Header, Right Angle, fv ounting Ends 20 395061020 | 395061120 | 395061220 | 395061520 | 395061620 | 395061720 | 395066020 | 395066120 | 395066220 | 395066520 | 395066620 | 395066720 | 80.30 | 3161 | 66.50 | 2618 | 75.10 | 2.957 TOLERANCES MM TOL INCH TOL 0-6 20.25 | 0-.24 +.010 >6-30 #0.40 | .24-118 | +.016 >30-120 | +0.50 | 1.18-4.76 | +.020 >120 40,80 | >4.76 +,031 a = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS Cl THIRD ANGLE S 3S! |symBois| (UNLESS SPECIFIED) MM/IN 11 INCH PROJECTION a= = mm INCH _ | DRAWN BY DATE TITLE =<S S&S FSS RZNf-0 [7 PlrAcesiE-- [4-___LROTHAUS 12/6/05 3.5MM, EURO HEADER we f 3 PLACES|t=-- [+=-- [CHECKED BY DATE RIGHT ANGLE, MOUNTING SExz 8/70 [2 PLACES += IC. YORK 01/06/06 ENDS = oss ws 1PLACE [--- |--- APPROVED BY DATE mut+s 2 0 PLACE [E + 2 S 2a ANGULAR +7772 MATERIAL NO. DOCUMENT NO. SHEET NO. Doe Se DRAFT Mere ATT RIC ABLE SEE CHART SD-39506-001 2 OF 2 rua > WITHIN DIMENSIONS SIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B1 iw INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_B_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 | 1 Rev E1 2012/01/25100% Tin 30 u" Gold 100% Tin 30 Gold Printing Options Printing Options Printing Options Printing Options Dirn. A Dim B Dim. None 104 Nore 104 None 108 None 104 ran inch fam, ineh mm inch mm, Euro Header, Right Angle, f ounting Ends 399061020 | 395061120 | 385061220 | 395061520 | 395001620 | SE5061720 | 395066020 | 395066120 | 385080220 | 385060520 | 395086620 | 35056720 | 60.30 | 3.161 | 66.50 | 2.616 | 7510 | 2957 TOLERANCES MM TOL INCH TOL 0-6 #0.25 | 0-.24 +.010 >6-30 +0.40 | .24-1.18 | +.016 >30-120 | +0.50 | 1.18-4.76 | +.020 >120 +0.80 | >4.76 +,031 QUALITY} GENERAL TOLERANCES THIRD. ANGLE (UNLESS SPECIFIED) MM/IN INCH Od PROJECTION 2017/0414 2017/03 DESCRIPTION W-o ROTHAUS 12/6! 3.5MM, EURO HEADER 3 PLACES RIGHT ANGLE, MOUNTING \/=0 [2 PLACES __ YORK 01/06/ aoe MOLEX INCORPORATED DOC TOL C NO: IPG2017-0881 TH DRAFT FER AT MCABLE SEE CHART _|SD-39506-001 2 0F 2 WITHA. Deane THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION Rev. D 2004/04/02 9 8 7 6 5 4 3 2 1