2
HIP2500
Absolute Maximum Ratings Full Temperature Range Unless
Otherwise Noted, All Voltages Referenced to VSS Unless Otherwise Noted. Thermal Information
Floating Supply Voltage, VB . . . . . . . . . . . . . . .VS-0.5V to VS+18.0V
(Positive Terminal)
Floating Supply Voltage, VS . . . . . . . . . . . . . . . . . . . . . . . . . . . 500V
(Common Terminal)
High Side Channel Output Voltage, VHO . . . . . . . .-0.5V to VB+0.5V
Fixed Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . -0.5V to 18.0V
Low Side Channel Output Voltage, VLO . . . . . . . .-0.5V to VCC+0.5V
Logic Supply Voltage, VDD . . . . . . . . . . . . . . . . . . . . . -0.5V to 18.0V
Logic Input Voltage, VIN . . . . . . . . . . . . . . . . . . . .-0.5V to VDD+0.5V
[HIN, LIN & SD (Shutdown)]
VDD to COM and VCC to VSS Voltage. . . . . . . . . . . . . -0.5V to 18.0V
Thermal Resistance (Note 1, Typical) θJA
HIP2500IP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75oC/W
HIP2500IP1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80oC/W
HIP2500IB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90oC/W
See Maximum Power Dissipation vs Temperature Curve
Junction Temperature Range . . . . . . . . . . . . . . . . .-40oC to +125oC
Storage Temperature Range, TS. . . . . . . . . . . . . . .-40oC to +150oC
Operating Ambient Temperature Range, TA . . . . . . .-40oC to +85oC
NOTE:
1. θJA is measured with the component mounted on an evaluation PC board in free air.
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause per manent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Recommended DC Operating Conditions
Floating Supply Voltage, VB . . . . . . . . . . . . . . . . VS+10V to VS+15V
(Floating Terminal)
High Side Channel Output Voltage, VHO . . . . . . . . . . . . . .10V to VB
(With Respect to VS)
Fixed Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . .10V to 15V
Low Side Channel Output Voltage, VLO . . . . . . . . . . . . . . 0V to VCC
Logic Supply Voltage, VDD . . . . . . . . . . . . . . . . . . . . . . . . 4V to VCC
Floating Supply Voltage, VS . . . . . . . . . . . . . . . . . . . . -4.0V to 500V
(Common Terminal)
VSS and COM potentials to be equal.
Electrical Specifications VCC = (VB- VS) = VDD = 15V, COM = VSS = 0, Unless Otherwise Noted
TJ = +25oCT
J
= -40oC TO +125oC
PARAMETER SYMBOL MIN TYP MAX MIN TYP MAX UNITS
DC CHARACTERISTICS
Quiescent VCC Current IQCC - 1.5 1.9 - - 2.0 mA
Quiescent VBS Current IQBS - 300 400 - 300 435 µA
Quiescent VDD Current IQDD - 0.1 1 - - 1.8 µA
Quiescent Leakage Current IS (500V) - 0.4 3.0 - - - µA
Logic Input Pulldown Current, VIN = VDD
(HIN, LIN, SD) IN+ -1220- -22µA
Logic Input Leakage Current, VIN = VSS
(HIN, LIN, SD) IN- - 0 1 - 0 1 µA
Logic Input Positive Going Threshold (Note 2) VTH+ 7.5 8.0 8.5 7.5 8.0 8.6 V
Logic Input Negative Going Threshold (Note 2) VTH- 5.5 5.9 6.3 5.5 5.9 6.4 V
Undervoltage Positive Going Threshold UV+ 8.0 9.35 9.99 7.8 - 9.99 V
Undervoltage Negative Going Threshold UV- 7.7 9.05 9.69 7.5 - 9.69 V
Undervoltage Hysteresis (VCC) UVHYS (VCC) 250 - 450 170 - 530 mV
Undervoltage Hysteresis (VBS) UVHYS (VBS) 250 - 450 170 - 530 mV
Output High Open Circuit Voltage (HO, LO) VOUT+ 14.95 15 - 14.95 15 - V
Output Low Open Circuit Voltage (HO, LO) VOUT- - - 0.05 - - 0.05 V
Output High Short Circuit Current (Sourcing) IOUT+ 1.65 2.1 - 1.15 1.6 - A
Output Low Short Circuit Current (Sinking) IOUT- 1.85 2.3 - 1.35 1.7 - A
NOTE:
2. See Figure 8 for logic supply voltages other than 15.0V.