POWER NLP250CJ Enclosure Installation Notes NLP250CJ Cover Accessory Kit NLP250CJ will fit the NLP250 power supplies. MATERIALS One (1) cover Four (4) M3x8 mm countersunk screws GAP PAD ON MAIN TRANSFORMER M3 C'SINK SCREW WITH 8mm LONG (4X) Installation Instructions and Notes 1. Place the cover over the NLP250 as shown. 2. Align the cover to the U-bracket countersink holes. 3. Secure four (4) countersink screws provided with in kit as shown. 4. Overall dimensions: 7" (177.8 mm) x 4" (101.6 mm) x 1.6" (40.64 mm). 5. When using this enclosure, ensure that relevant safety standards (e.g., EN60950) are complied with, in respect to creepage and clearance distances, and distances through insulation. 6. All dimensions are in inches (mm) NLP250CJ Enclosure Installation Notes Mechanical Drawing 7.00 (177.8) JP1 1 N J3 4 (101.6) J4 J2 VR7 L J1 1.6 (40.64) E WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. (c) 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com NLP250CJ Enclosure Installation Notes 31May2017 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Artesyn Embedded Technologies: NLP250CJ