www.switches-sensors.zf.com
Page 1 of 2, Last update 2017-05-04, Specifications subject to change without notice.
Sealed Rocker Switch
Double Pole
KD Series
Features
• Snap-in mounting
• RoHS compliant
• 100,000 cycles mechanical life
• IP65
• Lighted and non-lighted versions available
Standard Parts
1
North America North America and Europe Europe
KDH3ALA2GBB KDH3ANA1BBB KDH3AEA2GBB
KDH3ALA2RBB KDH3BNA1BBB KDH3AEA2RBB
KDH3CNA1BBB
1
The part number configuration matrix below provides details to the part numbers above.
For configurable part numbers that are not listed above, not listed in your region, or for custom part numbers, contact the factory or
your distributor.
Part Number Breakdown
KDH3ALA2BBB
KD H 3 A N A
Series Contact Rating
2
Circuitry Switch Function Lighting Options Terminal Type
KD H
3
Double pole A
ON-OFF N Non-lighted A 4.75 mm (0.187”)
quick connect
B
ON-ON E 220 VAC neon
C
ON-OFF-ON L 110 VAC neon
C 28 VDC LED
M 12 VDC LED
2
See Electrical Specifications section
2 B B B
Actuator Type
Actuator Color
3
Actuator Marking
1
Non-lighted
A Amber B
Black B
Blank
2 Lighted B Black D O ––
G Green G – =
L Blue
R Red
3
Black actuator is only available for non-lighted; others only for lighted.
www.switches-sensors.zf.com
Page 2 of 2, Last update 2017-05-04, Specifications subject to change without notice.
Electrical Specifications
Dielectric Strength 1500 VAC for 1 minute
Insulation Resistance 100 MΩ min at 500 VDC
Initial Contact Resistance 0.050 Ω max
Electrical Ratings
UL1054 VDC
3
16 A 125 VAC / 10 A 250 VAC 20 A 14 VDC / 10 A 28 VDC
Electrical Life at Rated Load UL
Minimum Operations 6,000
3
DC ratings not agency approved
UL File No: E23301
Material and Environmental Specifications
Actuator Polycarbonate 94V-2
Housing Nylon 66 94V-2
Spring Steel
Contacts Silver Alloy
Movable Arm Silver-Plated Copper Alloy
Terminals Silver-Plated Copper Alloy
Rubber Boot Silicone
Operating Temperature Range -25
O
C to +85
O
C (-13
O
F to +185
O
F)
Ingress Protection IP65
Circuitry and Switch Functions
Dimensions mm (inches)
Recommended Panel Cut-out
