MSC0885.PDF ISO 9001 CERTIFIED REV N 7/07/2000
8700 E. Thomas Road
Scottsdale, AZ 85252
Tel: (480) 941-6300
Fax: (480) 947-1503
DESCRIPTION (300 watt)
This 16 pin 8 line Unidirectional or Bidirectional array is designed for use in
applications where protection is required at the board level from voltage
transients caused by electrostatic discharge (ESD) as defined in IEC 1000-4-
2, electrical fast transients (EFT) per IEC 1000-4-4 and effects of secondary
lighting.
These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays have a
peak power of 300 watts for an 8/20 µsec pulse and are designed to protect
3.0/3.3 volt components such as DRAM’s, SRAM’s, CMOS, HCMOS, HSIC,
and low voltage interfaces up to 24 volts.
FEATURES MECHANICAL
Protects 3.0/3.3 up through 24V Components Molded SO-16 Surface Mount
Protects 8 lines Unidirectional or Bidirectional Weight: 0.128 grams (approximate)
Provides electrically isolated protection Body Marked with Logo, and device number
SO-16 Packaging Pin #1 defined by DOT on top of package
Encapsulation meets UL 94V-0
MAXIMUM RATINGS PACKAGING
Operating Temperatures: -550C to +1500CTape & Reel EIA Standard 481-1-A
Storage Temperature: -550C to +1500C13 inch reel 2,500 pieces (OPTIONAL)
Peak Pulse Power: 300 Watts (8/20 µsec, Figure 1) Carrier tubes 48 pcs per (STANDARD)
Pulse Repetition Rate: <.01%
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless otherwise specified
STAND
OFF
VOLTAGE
VWM
VOLTS
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE2)
VOLTS
LEAKAGE
CURREN
T
ID
@ VWM
µA
CAPACITANCE
(f=1 MHz)
@0V
C
pF
TEMPERATURE
COEFFICIENT
OF VBR
áVBR
mV/°C
PART
NUMBER DEVICE
MARKING
MAX MIN MAX MAX MAX TYP MAX
SM1603 MBA 3.3 4 7 9 125 850 -3
SM1603C MBB 3.3 4 7 9 200 425 -5
SM1605 MBC 5.0 69.8 11 20 880 3
SM1605C MBD 5.0 69.8 11 40 440 1
SM1612 MBE 12 13.3 19 24 1 440 10
SM1612C MBF 12 13.3 19 24 1 220 8
SM1615 MBG 15 16.7 24 30 1 400 13
SM1615C MBH 15 16.7 24 30 1 200 11
SM1624 MBK 24 26.7 43 55 1 275 30
SM1624C MBL 24 26.7 43 55 1 137 28
Part numbers with a “C” suffix are bidirectional devices
NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off voltage VWM. Product
selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected.
Application: The SM16XX/XXC product is designed for transient voltage suppression protection of components at the
board level. It is an ideal product to be used for protection of I/O Transceivers.
SM1603-03C
thru
SM1624-24C
TVSarray Series
MSC0885.PDF ISO 9001 CERTIFIED REV N 7/07/2000
SM1603-03C thru SM1624-24C
WAVE FORMS
FIGURE 1 FIGURE 2
Peak Pulse Power Vs Pulse Time Pulse Wave Form
MOUNTING PAD SO-16 CIRCUIT DIAGRAM
SO-16 PACKAGE
010 20 30
0
50
100
t -- Time in microsec
Ipp -- Peak Pulse Current -- % Ipp
Peak Value -- Ipp
Half-Value -- Ipp
2
8 X 20 Waveform
t
t
d
16
15
14
13
2
4
3
1
6
8
7
5
11
9
10
12
16
15
14
13
2
4
3
1
6
8
7
5
11
9
10
12
BP
GD
C
K
J
L
F
A
INCHES MILLIMETERS
MAXMINDIM MAXMIN
0.398 A 0.358 9.09 10.10
0.1580.150 3.81 4.01
0.0690.053 1.35 1.75
0.0210.011 0.28 0.53
0.0500.016 0.41 1.27
0.050 BSC 1.27 BSC
0.0100.006 0.15 0.25
0.0080.004 0.10 0.20
0.2060.189 4.80 5.23
B
C
D
F
G
J
K
L
0.244P0.228 5.79 6.19