Ordering number : ENN5075 N-Channel Junction Silicon FET High-Frequency Amplifier, Analog Switch Applications 2SK2539 Package Dimensions * Large | yfs |. * Small Ciss. * Small-sized package permitting 2SK2539-applied sets to be made small and slim. * Adoption of FBET process. unit:mm 2050A [2SK2539] 0.4 0.16 0 to 0.1 1 : Source 2 : Drain 3 : Gate SANYO : CP 0.8 1.1 1 0.95 0.95 2 1.9 2.9 0.5 1.5 2.5 3 0.5 Features Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Drain-to-Source Voltage Conditions Ratings VDSX VGDS Gate-to-Drain Voltage Unit 15 -15 V V Gate Current IG 5 Drain Current 50 mA 200 mW Junction Temperature ID PD Tj 150 C Storage Temperature Tstg -55 to +150 C Allowable Power Dissipation mA Electrical Characteristics at Ta = 25C Parameter Symbol Gate-to-Drain Breakdown Voltage Conditions V(BR)GDS IG=-10A, VDS=0 IGSS VGS=-10V, VDS=0 Gate-to-Source Leakage Current Zero-Gate Voltage Drain Current IDSS VGS(off) | yfs |1 Cutoff Voltage Forward Transfer Admittance | yfs |2 VDS=5V, VGS=0 VDS=5V, ID=10A 6 20.0 16.0 7 32.0 25.0 8 typ max -15 Unit V 10.0* -1.0 nA 50.0* mA -0.6 -1.4 VDS=5V, ID=10mA, f=1kHz 14 21 mS VDS=5V, VGS=0, f=1kHz 14 29 mS * : The 2SK2539 is classified by IDSS as follows : (unit : mA) 10.0 Ratings min -3.0 V Continued on next page. 50.0 Marking : AK IDSS rank : 6, 7, 8 (c) 2011, SCILLC. All rights reserved. Jan-2011, Rev. 0 www.onsemi.com Rev.0 I Page 1 of 3 I www.onsemi.com Publication Order Number: 2SK2539/D 2SK2539 Continued from preceding page. Parameter Symbol Input Capacitance Ciss Reverse Transfer Capacitance Crss Conditions VDS=5V, VGS=0, f=1MHz VDS=5V, VGS=0, f=1MHz Rev.0 I Page 2 of 3 I www.onsemi.com Ratings min typ max Unit 4.9 pF 1.4 pF 2SK2539 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. SCILLC strives to supply high-quality high-reliability products and recommends adopting safety measures when designing equipment to avoid accidents or malfunctions. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals," must be validated for each customer application by customer's technical experts. SCILLC shall not be held liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affi liates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affi rmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. % !" "& ' " " !"# $% & !'#'"# !!'((' ! ) * $%+ & !!'" "'- ) * & . " & ./&++000 + & (" #-! "-! *& !'#'"# !!'((' # ) * $%+ ! ! & , . " #$&www.onsemi.com $%+ & ''##' ! Rev.0 I Page 3 of 3 I www.onsemi.com * 2/ / 1 2SK2539/D