Interface Coaxial Switches MS-145 Series Overview and applications Designed primarily as interface coaxial switch for a mobile phones, they are also used in variety of other applications requiring redirecting of signals when mating with corresponding plug. The mating action redirects the signals from the receptacle side to the plug side. Receptacle Features 01. Space saving External dimensions are 7mm x 4.6mm. Saves installation space. 02. Low profile Low protrusion of only 6mm above the mounting surface (receptacle). 03. Light weight Weight is only 0.18g. 04. Durability High durability(mating/unmating) of 10 000 cycles. 05. Automatic mounting Plug Receptacle designed for placement on board with automated equipment. 06. Frequency range Can be used from DC to 2.5 GHz and with GSM, PCS, cdmaOne,W-CDMA, etc. 07. Plugs Wide variety of mating heights are available. 08. Solder wicking MS-145-C(LP)-1 MS-145-C(LP)-A MS-145-HRMJ MS-145-HRMP Receptacle terminations are designed to prevent solder wicking into the critical contact areas. 09. Self alignment of mating parts Inducement to floating is 0.5mm. Applications Mobile Phone antenna switching Checks of microwave boards, etc. Materials Part Material Outer shell Phosphor bronze Insulator Polyamide Common contact Beryllium copper Board circuit side (N.C.) contact Beryllium copper Finish Remarks --------------- UL94HB --------------- Gold plating Mounting area : Solder plating --------------- Contact area --------------- : Gold plating Mounting area : Solder plating --------------- Contact area --------------- : Gold plating 111 Product Specifications Operating temperature range -30c to +85c Power 2W Frequency range DC to 2.5 GHz Insertion loss 0.4 dB Max. (1 GHz to 2 GHz) 0.3 dB Max. (DC to 1 GHz) 0.6 dB Max. (2 GHz to 2.5 GHz) 20 dB Min. (DC to 1 GHz) Isolation 15 dB Min. (1 GHz to 2 GHz) 12 dB Min. (2 GHz to 2.5 GHz) 1.3 Max. (DC to 2 GHz) V.S.W.R. 1.5 Max. (2 GHz to 2.5 GHz) Item Standard Test Condition 1. Insulation resistance 1000M ohms Min. 100 V DC 2. Withstanding voltage No flashover or insulation breakdown 100 V AC/one minute 3. Contact resistance Center: 75 m ohms Max. Outside: 50 m ohms Max. at 100 mA Max. 4. Vibration No electrical discontinuity of 10 s or more Contact resistance Center: 100 m ohms Max. Outer : 75 m ohms Max. 5. Shock Frequency of 10 to 55 Hz, overall amplitude of 1.5 mm for 2 hours in each of 3 directions Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis 6. Thermal shock Center: 100 m ohms Max. Outer : 75 m ohms Max. Insulation resistance 10 M ohms Min. Temperature: -55c / +5c to +35c / +85c / +5c to +35c Time: 30 / 5 max. / 30 / 5 max. (Minutes) 5 cycles 7. Salt spray Center: 100 m ohms Max. Outer : 75 m ohms Max. No excessive corrosion Exposed to 5% salt water solution for 48 hours 8. Durability (Insertion/withdrawal) Contact resistance Center: 100 m ohms Max. Outer : 75 m ohms Max. 10000 cycles Contact resistance Contact resistance Typical Data dB 40 Open(N.O) 20 15 10 Isolation Open(N.O) 0.6 0.4 0.2 0 1.60 Insertion loss Normally closed(N.C) Open(N.O) 1.40 V.S.W.R. 1.20 Normally closed(N.C) 1.00 DC Frequercy 112 1 GHZ 2 2.5 Receptacle dimensions BCircuit Diagram Parts No : MS-145(06) 1,000 pieces per reel All dimensions in mm. Not mated with the plug (N.C) Mated with the plug (N.O) 4 5.4 6 G A G G A B G C G B G C G B O5.06 O3 Plug 2-0.15 2-0.2 3.65 6 G MS-145 BPCB Mounting Pattern 7 2.4 0.9 1 A G 4.6 2.3 G 6.4 C R2 2- 0.5 1.4 BPackaging Specifications 1,000 pieces / reel 12 4 Unreeling direction 2 16.4 O80 O380 16 7.5 1.75 2 O1.5 Unreeling direction 7.5 O13 113 Plug 7 13.7 13.7 13.7 10.2 O1.8 1.7 O5.55 8.2 5.95 15.5 O5.55 13.15 15.5 O5.55 4.65 O1.8 10.2 O1.8 10.2 14.2 MS-145-C(LP)-MI 7 MS-145-C(LP)-A 7 MS-145-C(LP)-1 O4.15 O4.15 O4.15 MS-145 to SMA adaptor MS-145 to SMA Male MS-145 to SMA Female Straight type Panel mount type Straight type MS-145-HRMP-A MS-145-HRMJ MS-145-HRMJ-A-D 12.7 8.64 12.7 6.3 8HEX 8.64 1/4-36UNS-2B 4-O 2.6 O7.3 1/4-36UNS-2A 6.7 5.3 18 14.03 23.13 O4.3 O4.9 7.4 1.7 7 11.37 19.87 6 1/4-36UNS-2A O4.15 O4.15 114 BPrecautions 1. Please select plugs according to the following applications. Part No. MS-145-C(LP)-1 Engagement position Engages up to a position (Q point) of 1.3 mm from the 5.06 mm diameter shoulder of the MS-145 Effective engagement length (Nominal) 0.82mm MS-145-C(LP)-A MS-145-C(LP)-MI Engages by pushing up to the 5.06 mm diameter shoulder (P surface) MS-145-HRMJ-A-D of the MS-145 1.32mm MS-145-HRMP-A MS-145-HRMJ Engages by pushing up to the 5.06 mm diameter shoulder (P surface) of the MS-145 0.82mm O5.06 "Q"point "P" surface 3.65 1.3 2. Applicable cable for plugs: 1.5D-HQEW or 1.5D-QEW (manufactured by Fujikura Ltd.). 3. No cleaning is needed after soldering or cable termination. 4. Please design avoiding holes so that force is not applied to this product from the case when dropped in the board mounted condition. 5. When mounted as the RF interface of a Mobile Phone, please consider using a rubber cap when the plug is not engaged to prevent dust from entering. 115 BApplication examples Board mounted receptacle O-ring Plug Cable 17 BRecommended Temperature Profile BRecommended Nozzle Dimensions O1 O1.5 O3 116 Maximum temperrature : 240c Duration of peak temperature : 10sec Max. Base peak temperature : 220c - 235c 200c or over : 50sec Max. 150c - 160c : 40sec Min.