MIL-DTL-38999/20G
w/AMENDMENT 3
REQUIREMENTS:
Dimensions and conf i guration: See figur e 1. Interface dimensi ons shall be in accordance with
MIL-DTL-38999.
This connector mates with MIL-DTL-38999/26.
For insert arrangem ents: See MIL-STD-1560.
Connector acce ss ories: See SAE-AS85049.
Part or Identifying Number (PIN) example:
D38999/ 20 W A 35 P N
DoD number prefix
Specification sheet number
Class
Shell size code
Insert arrangement
Contact style
Polarizing positions
N is required for norm al position
Restrictions: Class F is not for Navy use and is inactive for Air Forc e new design use.
NOTE: The term PIN is e quivalent to the term (part number, i dentification numb er, and type
designator) which was previously used in this specification.
Qualification required: The activity responsible for the quali fied product list f or t hi s specification sheet is
DLA Land and Maritime-VQ, 3990 East Broad Street, Columbus, Ohio, 43218-3990.
Amendment notati ons. The margins of this s pecification are m arked with vertical li nes t o i ndicate
modifications generated by this amen dment. This was don e as a convenience only and the Government
assumes no liabilit y whatsoever for any inaccuracies in these notations. Bidders and contracto rs are
cautioned to eval uat e the requirements of this document based on the entire content irrespective of the
marginal notation.
Referenced documents. In addition to MIL-DTL-38999, this document references the f oll owing:
MIL-STD-1560
MIL-DTL-38999/26
SAE-AS85049
4