POWER SIL30C Series C-Class Non-Isolated Data Sheet Total Power: Input Voltage: # of Outputs: 30 Amps 10.2 - 13.8 Vdc Single SPECIAL FEATURES 30 A current rating Input voltage range: 10.2 - 13.8 Vdc Nominal output voltage: 0.9 - 5 V Industry-leading value Cost optimized design Electrical Specifications Excellent transient response Input Output voltage adjustability Input voltage range Nominal 12 V 10.2 - 13.8 +Vdc Pathway for future upgrades Input current No load Remote OFF 230 mA 30 mA Input current (max.) See Note 4 13.8 A max. @ Io max. and Vin = 10.8 V Input reflexted ripple See Note 2 150 mA (pk-pk) Supports silicon voltage migration Reduced design-in and qual time Designed in reliability: MTBF of >3.9 million hours per Telcordia SR-332 Current share Remote ON/OFF Logic compatibility ON OFF RoHS compliant Start-up time Two year warranty Logic high >2.4 Vdc <0.8 Vdc See Note 5 Power up: 30 ms Remote ON/OFF: 30ms Turn ON threshold 9.0 Vdc SAFETY Turn OFF threshold 7.6 Vdc UL, cUL CAN/CSA 22.2 No. E139421 Output Voltage adjustability See Note 1 0.9 to 5.0 Vdc UL60950 File No. E139421 Output setpoint accuracy Using 1.0% trim resistors 3.0% TUV Product Service (EN60950) Certificate No. B04 08 19870 228 Line regulation Low line to high line 0.2% CB report and certificate to US/6415C/UL Load regulation Full load to min. load 1.5% Min./max. load 0 A/30 A Overshoot At turn-on 1.0% max. Undershoot At turn-off 10 mV max. Ripple and noise 5 Hz to 20 MHz See Note 2 50 mV pk-pk 15 mV rms Transient response See Note 3 75 mV typical deviation 150 s recovery to within regulation band Current share Full load 10% All specifications are typical at nominal input, full load at 25 C, unless otherwise stated. SIL30C Series Data Sheet General Specifications Environmental Specifications 91% Thermal performance Operating ambient temperature -0 C to +80 C 300 kHz typ. (See Note 8) Non-operating temperature -40 C to +125 C TUV Product Services EN60950, UL/cUL60950 Protection Short-circuit Foldback, non-latching Material flammability UL94V-0 Over-temperature Hiccup, non-latching Weight 28.3 g (1 oz) Recommended System Capacitance 4,456,655 hours Input capacitance (See Note 9) 270 F / 20 mW ESR max. Output capacitance (See Note 9) 680 F / 10 mW ESR max. Efficiency Switching frequency Approvals and standards MTBF Fixed (See Note 7) Telcordia SR-332 Ordering Information Model Number (10, 12) SIL30C-12SADJ-VJ Regulation Output Power (Max.) Input Voltage Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typical) Line Load 150 W 10.2 - 13.8 Vdc 0.9 - 5 V 0A 30 A 91% 0.2% 1.5% Part Number System with Options Product Family SIL SIL = Single In Line Performance Rated Output Current 30 30 = 30 Amp C C = Cost Optimized - Input Voltage Number of Outputs 12 S 12 = 10.2 - 13.8 Vdc S = Single Output Output Voltage ADJ ADJ = Adjustable Ouput Mounting Option - V V = Vertical H = Horizontal Output Voltage Adjustment Notes: The ultra-wide output voltage trim range offers major advantages to users who select the SIL30C-12SADJ. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SIL30C-12SADJ converter leaves the factory the output has been adjusted to the default voltage of 0.9 V. 2. Measured with external filter. See Application Note 132 for details. Packaging Options J J = Pb free (RoHS 6/6 compliant) 1. Uses external resistor from TRIM to output ground. See Application Note 132 for details. 3. di/dt = 10 A/s, Vin = Nom, Tc = 25 C, load change = 0.5 lo max to 0.75 lo max and 0.75 lo max to 0.5 lo max. 4. External input fusing is recommended. 5. Power up is the time from application of dc input to POWER GOOD high. Remote ON/OFF asserted high to POWER GOOD high. 6. Signal line assumed <3 m. 7. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 8. See Application Note 132 for operation above 50 C. 9. See Application Note 132 for ripple current requirements. 10. The standard unit with the suffix `-V' is for vertical mounting. To order a unit with horizontal mounting, please add the suffix `-H' to the model number, e.g. SIL30C-12SADJ-HJ. 11. This model has a wide trim output of between 0.9 Vdc to 5 Vdc. An external resistor adjusts the output voltage. 12. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/power to find a suitable alternative. SIL30C Series Data Sheet Mechanical Drawings Horizontal Mount Pin Assignments 0.470 (11.94) 0.150 (3.82) 1.240 (31.40) 0.120 (3.05) 1.350 (34.36) Trim No Pin Ground Power Good Not Connected Current Share Ground Ground Remote ON/OFF Remote Sense (GND) Remote Sense (O/P) Vin Vin Vin Vout Vout Ground Vout Ground Vout Ground Vout Ground Vout 0.050 (1.27) Ref. Function 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1.250 (31.75 Pin 0.150 (3.81) Ref. 0.100 (2.54) Typ. 0.050 (1.27) 1.200 (30.48) 0.290 (7.46) 0.212 (5.38) 2.300 (58.42) 0.090 (2.29) 0.120 (3.05) 2.400 (60.96) All dimensions in inches (mm) General tolerance 0.015in ( 0.30mm) except where specified otherwise Vertical Mount 0.52 0.02 (13.20 0.5) 2.400 (60.96) 0.09 0.02 (2.4 0.5) 0.025 0.001 (0.64) Typ 0.025 0.100 (2.54) Typ 2.300 (58.42) 0.140 (3.56) 0.050 (1.27) 0.140 (3.56 Typ) 1.250 (31.75) 0.062 (1.57) Ref 0.090 (2.29) Pin 1 0.250 (6.35) 0.050 (1.27) Typ 0.025 0.001 (0.64) Typ. 0.025 0.019 (0.48) Ref 1.200 (30.48) 0.26 0.03 (6.591 0.76) All dimensions in inches (mm) General tolerance 0.015in ( 0.30mm) except where specified otherwise WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. (c) 2015 Artesyn Embedded Technologies, Inc. www.artesyn.com For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com SIL30C Series 08Apr2015