POWER
SIL30C Series
C-Class Non-Isolated
Total Power: 30 Amps
Input Voltage: 10.2 - 13.8 Vdc
# of Outputs: Single
SPECIAL FEATURES
30 A current rating
Input voltage range: 10.2 - 13.8
Vdc
Nominal output voltage: 0.9 - 5 V
Industry-leading value
Cost optimized design
Excellent transient response
Output voltage adjustability
Pathway for future upgrades
Supports silicon voltage migration
Reduced design-in and qual time
Designed in reliability: MTBF of
>3.9 million hours per Telcordia
SR-332
Current share
RoHS compliant
Two year warranty
SAFETY
UL, cUL CAN/CSA 22.2 No.
E139421
UL60950 File No. E139421
TÜV Product Service (EN60950)
Certicate No. B04 08 19870 228
CB report and certicate to
US/6415C/UL
Electrical Specications
Input
Input voltage ra nge Nominal 12 V 10.2 - 13.8 +Vdc
Input current No load
Remote OFF
230 mA
30 mA
Input current (max.) See Note 4 13.8 A max. @ Io max. and Vin = 10.8 V
Input reexted ripple See Note 2 150 mA (pk-pk)
Remote ON/OFF
Logic compatibility
ON
OFF
Logic high
>2.4 Vdc
<0.8 Vdc
Start-up time See Note 5 Power up: 30 ms
Remote ON/OFF: 30ms
Turn ON threshold 9.0 Vdc
Turn OFF threshold 7.6 Vdc
Output
Voltage adjustability See Note 1 0.9 to 5.0 Vdc
Output setpoint accuracy Using 1.0% trim resistors ±3.0%
Line regulation Low line to high line ±0.2%
Load regulation Full load to min. load ±1.5%
Min./max. load 0 A/30 A
Overshoot At turn-on 1.0% max.
Undershoot At turn-off 10 mV max.
Ripple and noise
5 Hz to 20 MHz
See Note 2 50 mV pk-pk
15 mV rms
Transient response See Note 3 75 mV typical deviation
150 μs recovery to within regulation band
Current share Full load ±10%
All specications are typical at nominal input, full load at 25 °C, unless otherwise stated.
Data Sheet
SIL30C Series Data Sheet
Ordering Information
Model
Number (10, 12)
Output Power
(Max.)
Input
Voltage
Output
Voltage
Output Current
(Min.)
Output Current
(Max.)
Efficiency
(Typical)
Regulation
Line Load
SIL30C-12SADJ-VJ 150 W 10.2 - 13.8 Vdc 0.9 - 5 V 0 A 30 A 91% ±0.2% ±1.5%
Notes:
1. Uses external resistor from TRIM to output ground. See Application Note 132 for details.
2. Measured with external filter. See Application Note 132 for details.
3. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.5 lo max to 0.75 lo max and 0.75 lo
max to 0.5 lo max.
4. External input fusing is recommended.
5. Power up is the time from application of dc input to POWER GOOD high. Remote ON/OFF
asserted high to POWER GOOD high.
6. Signal line assumed <3 m.
7. This product is only for inclusion by professional installers within other equipment and must not
be operated as a stand alone product.
8. See Application Note 132 for operation above 50 ºC.
9. See Application Note 132 for ripple current requirements.
10. The standard unit with the suffix ‘-V’ is for vertical mounting. To order a unit with horizontal
mounting, please add the suffix ‘-H’ to the model number, e.g. SIL30C-12SADJ-HJ.
11. This model has a wide trim output of between 0.9 Vdc to 5 Vdc. An external resistor adjusts the
output voltage.
12. NOTICE: Some models do not support all options. Please contact your local Artesyn
representative or use the on-line model number search tool at http://www.artesyn.com/power
to find a suitable alternative.
Part Number System with Options
SIL 30 C - 12 S ADJ - V J
Product Family
SIL = Single In Line
Output Voltage
ADJ = Adjustable
Ouput
Performance
C = Cost
Optimized
Number of Outputs
S = Single Output
Input Voltage
12 = 10.2 - 13.8
Vdc
Packaging Options
J = Pb free (RoHS
6/6 compliant)
Mounting Option
V = Vertical
H = Horizontal
Rated Output
Current
30 = 30 Amp
General Specications
Efciency 91%
Switching frequency Fixed 300 kHz typ.
Approvals and
standards
(See Note 7) TÜV Product Services
EN60950, UL/cUL60950
Material ammability UL94V-0
Weight 28.3 g (1 oz)
MTBF Telcordia SR-332 4,456,655 hours
Environmental Specications
Thermal performance Operating ambient temperature -0 °C to +80 °C
(See Note 8) Non-operating temperature -40 °C to +125 °C
Protection
Short-circuit Foldback, non-latching
Over-temperature Hiccup, non-latching
Recommended System Capacitance
Input capacitance (See Note 9) 270 μF / 20 mW
ESR max.
Output capacitance (See Note 9) 680 μF / 10 mW
ESR max.
Output Voltage Adjustment
The ultra-wide output voltage trim range offers major advantages to users
who select the SIL30C-12SADJ. It is no longer necessary to purchase a
variety of modules in order to cover different output voltages. The output
voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the
SIL30C-12SADJ converter leaves the factory the output has been adjusted to
the default voltage of 0.9 V.
SIL30C Series Data Sheet
WORLDWIDE OFFICES
Americas
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
For more information: www.artesyn.com/power
For support: productsupport.ep@artesyn.com
www.artesyn.com
While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn
Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use
of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn
Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc.
All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective
owners. © 2015 Artesyn Embedded Technologies, Inc.
Mechanical Drawings
All dimensions in inches (mm)
General tolerance ±0.015in ( ±0.30mm)
except where specied otherwise
0.470
(11.94)
0.150
(3.82)
0.120
(3.05)
0.150
(3.81) Ref.
0.212
(5.38)
0.120
(3.05)
1.350
(34.36)
1.240
(31.40)
0.090
(2.29)
1.200
(30.48)
0.290
(7.46)
0.100
(2.54) Typ.
2.300
(58.42)
2.400
(60.96)
0.050
(1.27)
0.050
(1.27) Ref.
1.250
(31.75
Pin Assignments
Pin Function
1 Trim
2 No Pin
3 Ground
4 Power Good
5 Not Connected
6 Current Share
7 Ground
8 Ground
9 Remote ON/OFF
10 Remote Sense (GND)
11 Remote Sense (O/P)
12 Vin
13 Vin
14 Vin
15 Vout
16 Vout
17 Ground
18 Vout
19 Ground
20 Vout
21 Ground
22 Vout
23 Ground
24 Vout
SIL30C Series 08Apr2015
2.300
(58.42)
All dimensions in inches (mm)
General tolerance ±0.015in ( ±0.30mm)
except where specied otherwise
0.025 ±0.001
(0.64) Typ ±0.025
0.050
(1.27)
2.400
(60.96)
1.250
(31.75)
Pin 1
0.100
(2.54) Typ
0.090
(2.29)
0.250
(6.35)
1.200
(30.48)
0.52 ±0.02
(13.20 ±0.5)
0.025 ±0.001
(0.64) Typ. ±0.025
0.26 ±0.03
(6.591 ±0.76)
0.062
(1.57) Ref
0.09 ±0.02
(2.4 ±0.5)
0.050
(1.27) Typ
0.140
(3.56 Typ)
0.140
(3.56)
0.019
(0.48) Ref
Horizontal Mount
Vertical Mount