TAP1000 & 2000 1000 & 2000 Watt Heat Sinkable Planar The TAP series delivers 1000W or 2000W of continuous power when properly mounted to a liquid cooled heat sink (based on 85C mounting plate temperature) Applications include power conditioning, power distribution, power conversion, and power control. F e at u r e s A pp l i c at i o n s * High Energy Rating * Low Inductance * Resistor Element Electrically Isolated * High Dielectric Strength * Small Footprint * Power semiconductor balancing * Motor control * Inrush Current Limiting characteristics Resistor Element Thick Film on Alumina Substrate Power Rating 1000W or 2000W at 85C mounting plate Rating Continuous Pulse Test Rated Power, max. current and heat sink plate (TA1K0) 1000W temperature limited (TA2K0) 2000W Operating Voltage P*R Resistance Values 0.5 to 1000 Dielectric Strength 6KV standard Operating Temperature -55C to 85C Range Terminal Screws #10-32 Max Contacts Torque 10 in-lb Mounting Screws #8-32 Max Mounting Torque 15 in-lb Creepage Distance 50mm 1mm (min) Derating Percent Rated Watts 100 60 20 0 Test Method 0 25 50 85 100 125 150 Bottom of base plate Temperature, C Maximum R Short Time 1.14 x P*R / 10 sec @ 70C Overload Max % Rsto = (2% + 0.05) Moisture (TA1K0) 1000 hrs @ 40C, 90-95% RH Resistance (TA2K0) 1750 hrs @ 40C, 90-95% RH 1% 1% Thermal Shock MIL-STD-202, Method 107 MIL-STD-202, Method 107 Vibration, elec. MIL-STD-202, Method 201 2% Resistance Vibration, mech. MIL-STD-202, Method 201 No Loose Terminal Screws Pulse Tolerance 52F @ 2KV / 60 sec intervals, 104J, 20,000 Pulses 40 53.33A Critical Resistance; below this resistance max (TA1K0) 10 power has to be de-rated due to exceeding max (TA2K0) 20 current Load Life (TA1K0) 1000 Hrs 90 min ON / 30 min OFF (TA2K0) 1750 Hrs 90 min ON / 30 min OFF 80 2000VDC Max. Current 10A Max Operating Voltage 2000VDC Temperature Coefficient 250 PPM/C N/A Max. Applied Voltage, ohms law limited 223V Resistance Tolerance +10% std. Dielectric 6KVDC for 1 minute Strength 1% 1% 1% 1% (continued) 144 1-866-9-OHMITE * Int'l 1-847-258-0300 * Fax 1-847-574-7522 * www.ohmite.com * info@ohmite.com TAP1000 & 2000 1000 & 2000 Watt Heat Sinkable Planar dimensions A pp l i c at i o n n o t e s (in./mm) 0.193" (4.89mm) o0.172" (4.37mm) o10-32 0.689" (17.50mm) 1.308" (33.21mm) 1.622" (41.20mm) 3.000" (76.20mm) 1.308" (33.21mm) (same dimensions) 0.300" (7.62mm) 0.450" (11.43mm) 0.188" (4.76mm) 0.798" (20.26mm) Proper heat sinking techniques are essential to performance of a TAP resistor. Pleased follow these guidelines when designing TAP system: * Heats sink plate (base plate of the resistor) temperature must be monitored to establish proper de-rating. Best technique is to attach a thermocouple to the side of the base plate of the resistor. Temperature of plastic housing or heat sink cannot be used to establish rating of the resistor. Usage of laser thermometers should be avoided. * To obtain a power rating of 1000W or 2000W, the bottom case temp must not exceed 85C. This can only be achieved if the thermal conduction to the heatsink Rth-cs<0.025K/W. This value can be reached by using thermal transfer compound with a heat conductivity of 1W/mK. The flatness of the cooling plate must be better than 0.05mm overall. The roughness of the surface should not exceed 6.4m. * Due to very high power density, only liquid cooled heat sinks are recommended for applications when >300W power rating is desired. * Properly designed heat sink should have more than 2 cooling pipes under the surface of the TAP resistor. The Ohmite CP4 heat sink (http://www.ohmite.com/cat/sink_cp4.pdf) is an example of properly designed heat sink. o r d e r i n g i n f o r m at i o n RoHS Compliant TA 1 K 0 P H 2 R 5 0 K E Style Wattage Package Resistance Tolerance Type 2.5 = 2R50 K = 10% (standard) 50 = 50R0 L = 20% Standard Part Numbers Ohms 0.5 1 2.5 5 7.5 10 15 25 50 100 250 500 750 1000 1000 Watt 10% Tolerance TA1K0PHR500KE TA1K0PH1R00KE TA1K0PH2R50KE TA1K0PH5R00KE TA1K0PH7R50KE TA1K0PH10R0KE TA1K0PH15R0KE TA1K0PH25R0KE TA1K0PH50R0KE TA1K0PH100RKE TA1K0PH250RKE TA1K0PH500RKE TA1K0PH750RKE TA1K0PH1K00KE 1-866-9-OHMITE * Int'l 1-847-258-0300 * Fax 1-847-574-7522 * www.ohmite.com * info@ohmite.com Ohms 0.5 1 2.5 5 7.5 10 15 25 50 100 250 500 750 1000 145 2000 Watt 10% Tolerance TA2K0PHR500KE TA2K0PH1R00KE TA2K0PH2R50KE TA2K0PH5R00KE TA2K0PH7R50KE TA2K0PH10R0KE TA2K0PH15R0KE TA2K0PH25R0KE TA2K0PH50R0KE TA2K0PH100RKE TA2K0PH250RKE TA2K0PH500RKE TA2K0PH750RKE TA2K0PH1K00KE Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Ohmite: TA1K0PH50R0K TA1K0PH15R0K TA1K0PH4R00K TA1K0PH5R00K TA1K0PH2R50K TA1K0PH10R0K TA1K0PH8R00K TA1K0PH3R00K TA1K0PH30R0K TA1K0PH25R0K TA1K0PH10R0KE TA1K0PH4R00KE TA1K0PH5R00KE TA1K0PH2R50KE TA1K0PH25R0KE TA1K0PH3R00KE TA1K0PH8R00KE TA1K0PH50R0KE TA1K0PH15R0KE TA1K0PH30R0KE TA1K0PH100RKE TA1K0PH250RKE TA1K0PH500RKE TA1K0PH1K00KE TA1K0PH750RKE TA2K0PH100RKE TA2K0PH10R0KE TA2K0PH15R0KE TA2K0PH1K00KE TA2K0PH1R00KE TA2K0PH250RKE TA2K0PH25R0KE TA2K0PH2R50KE TA2K0PH500RKE TA2K0PH50R0KE TA2K0PH5R00KE TA2K0PH750RKE TA2K0PH7R50KE TA2K0PHR500KE TA1K0PH1R32KE TA1K0PHR500KE