PHOTOSENSORS
CX SERIES M18 BARREL TYPE DC
22
•Short body
•Flat lens
•Easy mounting
•Housing sealed to IP66
•LED indication
•Plug in types available (J- suffix)
Type No. Description Output Range
CXM2RD-NPN Retro-reflective 2m cable NPN 2m
CXM2RD-PNP Retro-reflective 2m cable PNP 2m
CXM2RD-NPN-J Retro-reflective M8 Connector NPN 2m
CXM2RD-PNP-J Retro-reflective M8 Connector PNP 2m
CXR01-NPN Diffuse 2m cable NPN 100mm
CXR01-PNP Diffuse 2m cable PNP 100mm
CXR01-NPN-J Diffuse M8 Connector NPN 100mm
CXR01-NPN-J Diffuse M8 Connector NPN 100mm
Type No. Description Output Range
CXR01-PNP-J Diffuse M8 Connector PNP 100mm
CXR03V-NPN Diffuse 2m cable adjustable NPN 300mm
CXR03V-PNP Diffuse 2m cable adjustable PNP 300mm
CXR03V-NPN-J Diffuse M8 Connector adjustable NPN 300mm
CXR03V-PNP-J Diffuse M8 Connector adjustable PNP 300mm
K7 Reflector (Included with
Retro-reflective sensor)
Type No. CXM2RD CXR01 CXR03V
Function Polarised Diffuse Diffuse
Retro Reflective Adjustable
Range 2m* 100mm** 300mm***
Current NPN 18 mA 17 mA 20 mA
Consumption PNP 24 mA 23 mA 26 mA
Operating Mode Dark on Light on
Light Source Red LED Infrared LED
Wavelength 700nm 950nm
Material Lens: Acrylic Body + Lens
Body: Polycarbonate Polycarbonate
GENERAL SPECIFICATIONS
* With included K7 reflector. ** Using 50x50mm white paper, range will vary depending on target size and surface.
*** Using 100x100mm white paper, range will vary depending on target size and surface.
• Power Supply:
12 - 24VDC ±10%
• Control output:
PNP or NPN,
100 mA at max 30VDC
short circuit protected
• Response time: 0.35mS max
• Ambient light: max
10000 lux
• Indication: Red LED
when output is activated
• Temperature range:
-25°c to + 55°c
• Housing: Polycarbonate
sealed to IP66
• Connection: 3 x 0.2mm2
flying lead length 2m or
connector (-J version)
Reflector K7
M18x1
44
37
55
65
LED 24
22
M18x144
37
55
65
LED
M8x1 M8 (4 Pin)
Connector
SENS. Adjustment 8
40
6.5
5260
2-Ø3.2
DIMENSIONS
Cable
type Connector
type
Brown
Black
Blue
+
_
NPN
Brown
Black
Blue
+
_
PNP
ELECTRICAL CONNECTIONS
If the load is inductive (relay coil, solenoid) or if there are inductive loads in
parallel with the load, connect a diode (IN4002) in parallel with the coil
Wiring
Pin/Wire Colour
1/ brown 12 to 24VDC
2/ white
3/ blue OV
4/ black Output
ORDERING GUIDE
www.oem.co.ukOEM Automatic
