S1231156115 - Carlo Gavazzi Group

Plug Output Time range Supply: 24 VAC Supply: 115 VAC Supply: 230 VAC Supply: 24 VDC

Circular SPDT 0.15 s-220 h S 1231 156 024 S 1231 156 115 S 1231 156 230 S 1231 156 724

DPDT 0.15 s-220 h S 1231 166 024 S 1231 166 115 S 1231 166 230 S 1231 166 724

Specifications are subject to change without notice (05.02.03) 1

Timers

Multi time range, plug-in,

asymmetrical ON/OFF recyc-

ler with 20 selectable time

ranges up to 220 h. Appli-

cable where loads are

desired to switch on or off

for short or very long cycles.

Time ranges 0.15 s - 1.5 s

Selectable by DIP-switch 0.3 s - 3 s

0.6 s - 6 s

1.2 s - 12 s

2.5 s - 25 s

5 s - 50 s

10 s - 100 s

20 s - 200 s

40 s - 400 s

1.3 m - 13 m

2.6 m - 26 m

5 m - 50 m

10 m - 100 m

20 m - 200 m

40 m - 400 m

1.4 h - 14 h

2.8 h - 28 h

5.5 h - 55 h

11 h - 110 h

22 h - 220 h

Accuracy 0 to +10% on max.

min. actual time ≤set time

Repeatability deviation ≤1%

Time variation

Within rated power supply ≤0.05%/V

and ambient temperature ≤0.2%/°C

Reset Power supply interruption min.

Time and/or relay 200 ms

• 20 selectable time ranges: 0.15 s to 220 h

• Automatic start (OFF- or ON-time first)

• Separate setting for OFF- and ON-time periods

• Oscillator-controlled time circuit

• Repeatability deviation: ≤1%

• Output: 10 A SPDT or 8 A DPDT relay

• Plug-in type module

• S-housing

• LED-indication for relay and power supply on

• AC or DC power supply

Asymmetrical Multi Recycler

Type S 1231

Housing

Type /function

Output

Power supply

Power supply AC types Installation cat. III (IEC 60664)

Rated operational voltage

through pins 2 & 10 230 230 VAC ± 15%, 45 to 65 Hz

115 115 VAC ± 15%, 45 to 65 Hz

024 24 VAC ± 15%, 45 to 65 Hz

Drop out tolerance ≥40 ms

Rated insulation voltage ≥2.0 kVAC (rms)

Rated transient protection volt. 4 kV (1.2/50 µs)

(line/neutral)

Power supply DC type Installation cat. III (IEC 60664)

Rated operational voltage 724 24 VDC ± 15% (pin 2 pos.)

Rated insulation voltage None

Rated transient protection volt. 800 V (1.2/50 µs)

Consumption AC supply 2.5 VA

DC supply 1.5 W

Product Description Ordering Key

Type Selection

Time Specifications Supply Specifications

S 1231 156 024

2Specifications are subject to change without notice (05.02.03)

OFF-time period first

The OFF-time period starts

when power supply is applied.

At the end of the set OFF-time

period, the relay operates and

the ON-time period starts.

At the end of the set ON-time

period, the relay releases and

the OFF-time period starts

again.

This sequence continues until

power supply is interrupted.

S 1231

ON-time period first

The relay operates and the

ON-time period starts when

power supply is applied.

At the end of the set ON-time

period, the relay releases and

the OFF-time period starts.

At the end of the set OFF-time

period the relay operates and

the ON-time period starts

again.

This sequence continues until

power supply is interrupted.

S 1231 156 S 1231 166

Output SPDT relay DPDT relay

Basic electrical insulation 250 VAC (rms) (contact/electronics) 250 VAC (rms) (contacts/elec., contact/contact)

Contact ratings (AgCdO) µ (micro gap) µ (micro gap)

Resistive loads AC 1 10 A/250 VAC (2500 VA) 8 A/250 VAC (2000 VA)

DC 1 1 A/250 VDC (250 W) 0.4 A/250 VDC (100 W)

or 10 A/25 VDC (250 W) 4 A/25 VDC (100 W)

Small inductive loads AC 15 2.5 A/230 VAC 2.5 A/230 VAC

DC 13 5 A/24 VDC 5 A/24 VDC

Mechanical life ≥30 x 10

operations ≥30 x 10

operations

Electrical life AC 1 ≥2.5 x 10

operations (at max. load) ≥2.5 x 10

operations (at max. load)

Operating frequency ≤7200 operations/h ≤7200 operations/h

Insulation voltages

Rated insulation voltage ≥2.0 kVAC (rms) (contact/electronics) ≥2.0 kVAC (rms) (contact/electronics)

Rated transient protection volt. 4 kV (1.2/50 µs) (contact/electronics) (IEC 60664) 4 kV (1.2/50 µs) (contact/electronics) (IEC 60664)

Power-on delay ≤200 ms

Power-off delay ≥200 ms

Indication for

Power supply ON LED, green

Output ON LED, red

Environment IP 20 B

Pollution degree 2 (IEC 60664)

Operating temperature -20 to +50°C (-4 to +122°F)

Storage temperature -50 to +85°C (-58 to +185°F)

Weight

AC supply 200 g

DC supply 125 g

Approvals UL, CSA

CE-marking Yes

OFF-time first

Power supply

S 1231 156, S 1231 166

ON-time first

Power supply

S 1231 156, S 1231 166

Sockets◊S 411

Hold down spring◊HF

Mounting rack SM 13

Socket covers BB 4

Front mounting bezel FRS2

Potentiometer lock PL 2

For further information refer to "Accessories".

For other AC/DC voltages refer to "General Information".

Output Specifications

General Specifications Mode of Operation

AccessoriesWiring Diagram

Specifications are subject to change without notice (05.02.03) 3

1 2 3 4 5 ON-time

6 7 8 9 10 OFF-time

Selection of function

OFF-time period first:

(no connection between pins

6 & 7).

ON-time period first:

Interconnect pins 6 and 7.

Selection of time range

DIP-switch selector:

ON-time ranges:

Switches 1 to 5.

OFF-time ranges:

Switches 6 to 10.

Time setting

Two independent knob-ad-

justable potentiometers for

OFF- and ON-time on scale

in per cent of max. time.

DIP-switches for selecting

function and time are placed

behind a small removable

front plate on the time relay.

S 1231

Example of time setting

ON: 0.15 - 1.5 s

OFF: 1.3 - 13 m

1 2 3 4 5 6 7 8 9 10

Function/Time Setting

Operation Diagram

0.15 s - 1.5 s

0.3 s - 3 s

0.6 s - 6 s

1.2 s - 12 s

2.5 s - 25 s

5 s - 50 s

10 s - 100 s

20 s - 200 s

40 s - 400 s

1.3 m - 13 m

2.6 m - 26 m

5 m - 50 m

10 m - 100 m

20 m - 200 m

40 m - 400 m

1.4 h - 14 h

2.8 h - 28 h

5.5 h - 55 h

11 h - 110 h

22 h - 220 h

Power supply

Relay on:

Pins 6 & 7 not connected

Relay on:

Pins 6 & 7 connected