SDCFJ-128-388 - SanDisk Corp. - Datasheet.Directory

SanDisk CompactFlash Memory Card

OEM Product Manual

Version 12.0

Document No. 20-10-00038

02/2007

SanDisk Corporation

Corporate He ad qu a rte r s

601 McCarthy Boulevard

Milpitas, CA 95035

(408) 801-1000 Phone

(408) 801-8657 Fax

www.sandisk.com

SanDisk CompactFlash Card OEM Product Manual

SanDisk® Corporation general policy does not recommend the use of its products in life support applications where in a failure

or malfunction of the product may directly threaten life or injury. Per SanDisk Terms and Conditions of Sale, the user of SanDisk

products in life support applications assumes all risk of such use and indemnifies SanDisk against all damages. Security

safeguards, by their nature, are capable of circumvention. SanDisk cannot, and does not, guarantee that data will not be

accessed by unauthorized persons, and SanDisk disclaims any warranties to that effect to the fullest extent permitted by law.

This document is for information use only and is subject to change without pr ior notice. SanDisk Corporation assumes no

responsibility for any errors that may appear in this document, nor for incidental or consequential damages resulting from the

furnishing, performance or use of this material. No part of this document may be reproduced, transmitted, transcribed, stored in

a retrievable manner or translated into any language or computer language, in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written consent of an officer of SanDisk

Corporation.

All parts of the SanDisk documentation are protected by copyright law and all rights are reserved.

SanDisk and the SanDisk logo are trademarks of SanDisk Corporation, registered in the United States and other countries.

CompactFlash is a U.S. registered trademark of SanDisk Corporation.

Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of

their respective companies.

SanDisk products are covered or licensed under one or more of the following U.S. Patent Nos. 5,070,032; 5,095,344; 5,168,465;

5,172,338; 5,198,380; 5,200,959; 5,268,318; 5,268,870; 5,272,669; 5,418,752; 5,602,987. Other U.S. and foreign patents

awarded and pending.

Document 20-10-00038 Rev. 12.0

Revision History

Date Revision Description

February 2007 12.0 Merged CFlash 11.2 manual with CF ExtremeIII

v1.2 to create v12.0; updated to comply with CFA

Spec v4.0.

SanDisk CompactFlash Card OEM Product Manual

–This page intentionally left blank–

Table of Content s

CHAPTER 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

CompactFlash Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

PCMCIA Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3

Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3

CHAPTER 2 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

System Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . 2-1

System Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1

System Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

System Reliability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4

Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4

CHAPTER 3 Interface Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Physical Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1

Electrical Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Electrical Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-8

Card Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20

I/O Transfer Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-25

True IDE Mode I/O Transfer Function . . . . . . . . . . . . . . . . . . . . . . . 3-26

CHAPTER 4 ATA Register Set and Protocol . . . . . . . . . . . . . . . . . . . . . . . . 4-1

I/O Primary and Secondary Address Configurations . . . . . . . . . . . . 4-1

Contiguous I/O Mapped Addressing . . . . . . . . . . . . . . . . . . . . . . . . .4-2

Table of C ontents SanDisk CompactFlash Card OEM Product Manual

Memory Mapped Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3

True IDE Mode Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4

ATA Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4

CHAPTER 5 ATA Command Description . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

ATA Command Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

Error Posting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-29

CHAPTER 6 CIS Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

APPENDIX A Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

APPENDIX B Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

APPENDIX C Disclaimer of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

CHAPTER 1 Introduction

1.1 General Description

SanDisk CompactFlash® Memory Card products provide high capacity solid-state flash

memory that electrically complies with the Personal Computer Memory Card International

Association ATA (PC Card ATA) standard. (In Japan, the applicable standards gro up is

JEIDA.) The CompactFlash Memory Card Series also supports a True IDE Mode that is

electrically compatible with an IDE disk drive. The original CF form factor card can be used in

any system that has a CF slot, and with a Ty pe II PCMCIA adapter can be used in any system

that has a PCMCIA Type II or Type III socket.

CompactFlash Memory cards use SanDisk Flash memory, which was designed by SanDisk

specifically for use in mass storage applications. In addition to the mass storage-specific flash

memory chips, CompactFlash Memory cards include an on-card intelligent controller that

provides a high level interface to the host computer. This interface allows a host computer to

issue commands to the memory card to read or write blocks of memory. The host addresses the

card in 512 byte sectors. Each sector is protected by a powerful Error Correcti ng Code ( ECC).

The on-card intelligent controller in the CompactFlash Memory Card manages interface

protocols, data storage and retrieval as well as ECC, defect handling and di agnost ics, po wer

management and clock control. Once the card has been configured by the host, it appears to the

host as a standard ATA (IDE) disk drive. Additional ATA commands have been provided to

enhance system performance.

The host system can support as many cards as there are CompactFlash and PCMCIA Type II or

III card slots. The original form factor CompactFlash Memory cards require a PCMCIA Type

II Adapter to be used in a PCMCIA Type II or Type III socket.

Figure 1-1 SanDisk CompactFlash Card Block Diagram

Host

Interface Flash

Memory

SanDisk

Single Chip

Controller Control

Data In/Out

SanDisk CompactFl ash

Introduction SanDisk CompactFlash Card OEM Product Manual

1.2 Features

SanDisk CompactFlash Memory cards provide the fo llowing system features:

• Up to 16 GB of mass storage data

• PC Card ATA protocol compatible

• True IDE Mode compatible

• Very low CMOS power

• Very high performance

• Very rugged

• Low weight

• Noiseless

• Low Profile

• +5 Volts or +3.3 Volts operation

• Automatic error correction and retry capabilities

• Supports power down commands and sleep modes

• Non-volatile storage (no battery required)

• MTBF >1,000,000 hours

• Minimum 10,000 insertions

1.3 Scope

This document describes the key features and specifications of CompactFlash Memory cards,

as well as the information required to interface this product to a host system. Retail

CompactFlash specifications are not covered in this manual.

1.4 CompactFlash Standard

SanDisk CompactFlash Memory cards are fully compatible with the CompactFlash

Specification published by the CompactFlash Association. Contact the CompactFlash

Association for more information.

CompactFlash Association

P.O. Box 51537

Palo Alto, CA 94303

USA

Phone: 415-843-1220

Fax: 415-493-1871

www.compactflash.org

SanDisk CompactFlash Card OEM Product Manual Introduction

1.5 PCMCIA Standard

SanDisk CompactFlash Memory cards are fully electrically compatible with the PCMCIA

specifications listed below:

•PCMCIA PC Card Standard, 7.0, February 1999

•PCMCIA PC Card ATA Specification, 7.0, February 1999

These specifications may be obtained from:

PCMCIA

2635 N. First Street, Suite 209

San Jose, CA 95131

USA

Phone: 408-433-2273

Fax: 408-433-9558

1.6 Related Documentation

ATA operation is governed by the ATA -4 specification published by ANSI. For more

information, refer to the American National S tandard X3.221: AT Attachment for Interface for

Disk Drives document.

Documentation can be ordered from IHS by calling 1-800-854-7179 or accessing their Web

site: http://global.ihs.com .

1.7 Functional Description

CompactFlash Memory cards contain a high level, intelligent subsystem as shown in the block

diagram, Figure 1-1. This intelligent (microprocessor) subsystem provi des ma ny capab ilities

not found in other types of memo ry card s. Th ese capabili ties include the following:

•Standard ATA register and command set (same as found on most magnetic disk drives).

•Host independence from details of erasing and pro gramming flash memory.

•Sophisticated system for managing defects (analog ous to systems found in magnetic disk

drives).

•Sophisticated system for error recovery including a powerful error correction code (ECC).

•Power management for low power operation.

•Implementation of dynamic and static wear-leveling to extend card’s life.

Introduction SanDisk CompactFlash Card OEM Product Manual

1.7.1 Technology Independence

The 512-byte sector size of the CompactFlash Memory Card is the same as that in an IDE

magnetic disk drive. To write or read a sector (or multiple sectors), the host computer software

simply issues a Read or Write command to the card. This command contains the address and

the number of sectors to write/read. The host software then waits for the command to

complete.

The host software does not get involved in the details of how the flash mem ory is erased ,

programmed or read. This is extremely important as flash devices are expected to get more and

more complex in the future. Because the CompactFlash Memory Card Series uses an

intelligent on-board controller, the host system software will not require changing as new flash

memory evolves. In other words, systems that support CompactFlash Memory cards now , will

be able to access future SanDisk cards built with new flash technology without having to

update or change host software.

1.7.2 Defec t and Erro r M an age me nt

CompactFlash Memory cards contain a sophisticated defect and error management system.

This system is analogous to the systems found in magnetic di sk d riv es and in many cases

offers enhancements . If necessary, the cards will rewrite data from a defective sector to a good

sector. This is completely transparent to the host and does not consu me any user data space.

The CompactFlash Memory Card soft error rate specification is much better than the magnetic

disk drive specification. In the extremely rare case a read error does occur, CompactFlash

Memory cards have innovative algorithm s to recover the data by using hard ware on-the-fly

Error Detection Code/Error Correction Code (EDC/ECC), based on a BCH algorithm.

These defect and error management systems, coupled with the solid state construc tion, give

SanDisk CompactFlash cards unparalleled reliability

1.7.3 Wear Leveling

Wear Leveling is an intrinsic part of the erase pooling functionality of SanDisk CompactFlash

using NAND memory. The CF WEAR LEVEL command is supported as a NOP operation to

maintain backward compat ibility with existing software utiliti es. Advanced features of

dynamic and static wear-leveling, and automa tic blo c k manag e men t are used to ensure high

data reliability and maximize flash life expectancy.

1.7.4 Using Erase Sector and Write Commands

SanDisk CompactFlash Memory cards support the CF ERASE SECTOR and WRITE

WITHOUT ERASE commands. In some applications, write operations may be faster if the

addresses being written are first erased with the ERASE SECTOR command. WRITE

WITHOUT ERASE behaves as a normal write command and no performance gain results

from its use.

SanDisk CompactFlash Card OEM Product Manual Introduction

1.7.5 Automatic Sleep Mode

A unique feature of t h e SanD i s k Com pactFlash Memory Card is automatic entrance and exit

from sleep mode. Upon completion of a command, the card will enter sleep mode to conserve

power if no further commands are received within 5 msec. The host does not have to take any

action for this to occur. In most systems, the CompactFlash Memory Card is in sleep mode

except when the host is accessing it, thus conserving power. The delay from command

completion to entering sleep mod e is adjustable.

When the host is ready to access the card and is in sleep mode, any command issued to it will

cause the card to exit sleep and respond. The host does not have to follow the ATA protocol of

issuing a reset first. It may do this if desired, but it is not needed . By not issuing the reset,

performance is improved through the reduction of overhead but this must be done only for the

SanDisk products as other ATA products may not support this feature.

1.7.6 Dynamic Adjustment of Performance vs. Power Consumption

This feature is no longer supported. This command will be treated as a NOP (No Operation) to

guarantee backward compatibility.

1.7.7 Power Supply Requirements

This is a dual voltage product, which means it will operate at a voltage range of 3.30 volts ±

5% or 5.00 volts ± 10%. Per the PCMCIA specification Section 2.1.1, the host system must

apply 0 volts in order to change a voltage range. This same pro ced ure of providing 0 volts to

the card is required if the host system applies an input voltage outside the desired voltage by

more than 15%. This means less than 4.25 volts for the 5.00-volt range and less than 2.75 volts

for the 3.30 volt range.

Introduction SanDisk CompactFlash Card OEM Product Manual

–This page intentionally left blank–

CHAPTER 2 Product Specifications

For all the following specificatio ns, values are defined at ambient temperature and nominal

supply voltage unless otherw ise stated.

2.1 System Environmental Specifications

Table 2-1 contains environmental specifications which include temperature, humidity, acoustic

noise, vibration, shock and altitude.

Table 2-1 Environmental Specifications

CompactFlash CompactFlash Extreme III

Temperature Operating:

Non-operating: 0° C to 70 ° C

-25° C to 85° C

Humidity Operating:

Non-operating:

8% to 95% non-condensing

Acoustic Noise At 1 meter: 0 dB 0 dB

Vibration Operating:

Non-operating: 15 G peak to peak maximum

15 G peak to peak maximum 15 G peak to peak maximum

15 G peak to peak maximum

Shock Operating:

Non-operating: 2,000 G maximum

2,000 G maximum 2,000 G maximum

2,000 G maximum

Altitude

(relative to sea

level)

Operating:

Non-operating: 80,000 ft. maximum

80,000 ft. maximum 80,000 ft. maximum

80,000 ft. maximum

2.2 System Power Requirements

All values quoted in Table 2-2 are typical at 25° C and nominal supply voltage unless otherwis e

stated.

Product Specifications SanDisk CompactFlash Card OEM Product Manual

Sleep mode currently is specified under the condition that all card inputs are static CMOS

levels and in a "Not Busy" operating state.

Table 2-2 Power Requirements

DC Input Voltage (Vcc)

100 mV max. ripple (p-p) 3.3V +/- 5% 5V +/- 10%

Memory Subsystema CompactFlash Memory Card

Sleep

Up to 512 MB 300 µ500 µ

1.0 GB 600 µ800 µ

Over 1.0 GB 1 mA 1.2 mA

Read 50 mA 55 mA

Write 65 mA 70 mA

Read/Write Peak 100 mA 100 mA

Memory Subsystema CompactFlash Extreme III Memory Card

Sleep

Up to 512 MB

512 MB to 1.5 GB

Over 1.5 GB

300 µ

600 µ

1 mA

500 µ

800 µ

1.2 mA

Read 75 mA 100 mA

Write 75 mA 100 mA

Read/Write Peak 100 mA 100 mA

a. Maximum average value.

SanDisk CompactFlash Card OEM Product Manual Product Specifications

2.3 System Performance

All performance timings assume the CompactFlash Memory Card Series controller is in the

default (i.e., fastest) mode.

Table 2-3 Performance

CompactFlash Memory Card

Start-up Times

Sleep to Write

Sleep to Read

Reset to Ready

2.5 ms maximum

20 ms maximum

50 ms typical; 400 ms maximum

Active to Sleep Delay Programmable

Data Transfer Rate To/From Flash 20.0 MB/sec burst

Data Transfer Rate To/From Host 16.0 MB/sec burst

Controller Overhead

Command to DRQ 50 ms maximum

Comp actFlash Extreme III Memory Card

Start-up Times

Sleep to Write

Sleep to Read

Reset to Ready

2.5 ms maximum

20 ms maximum

50 ms typical; 400 ms maximum

Data Transfer Rate To/From Flash 20.0 MB/sec burst

Data Transfer Rate To/From Host 25.0 MB/sec burst

Maximum Performance

Sequential Read 20.0 MB/sec

Sequential Write 20.0 MB/sec

NOTE:The Sleep to Write and Sleep to Read times are the times it takes the

CompactFlash Memory Card to exit sleep mode when any command

is issued by the host to when the card is reading or writing.

CompactFlash Memory cards do not require a reset to exit sleep

mode.

Product Specifications SanDisk CompactFlash Card OEM Product Manual

2.4 System Reliability

Table 2-4 Reliability

MTBF (@ 25 C) >1,000,000 hours

Preventative Maintenance None

Data Reliability <1 non-recoverable error in 1014 bits read

<1 erroneous correction in 1020 bits read

2.5 Physical Specifications

Refer to Table 2-5 and see Figure 2-1 for CompactFlash Memory Card physical specifications

and dimensions.

Table 2-5 CompactFlash Physical Dimensions

Weight 11.4 g (.40 oz) typical, 14.2 g (.50 oz) maximum

Length 36.40 ± 0.15 mm (1.433 ± .006 in)

Width 42.80 ± 0.10 mm (1.685 ± .004 in)

Thickness 3.3 mm ± 0.10 mm (.130 ± .004 in) (Excluding Lip)

SanDisk CompactFlash Card OEM Product Manual Product Specifications

Figure 2-1 CompactFlash Memory Card Dimensions

Product Specifications SanDisk CompactFlash Card OEM Product Manual

–This page intentionally left blank–

CHAPTER 3 Interface Description

3.1 Physical Description

The host connects to SanDisk CompactFlash Memory cards using a standard 50-pin connector

consisting of two rows of 25 female contacts each on 50 mil (1.27 mm) centers.

3.1.1 Pin Assignments and Types

The signal/pin assignments are listed in Table 3-1. Low active signals have a "-" prefix. Pin

types are Input, Output or In put /Output. Sections 3.3.1 and 3.3.2 define the DC characteristics

for all input and output type structures..

Table 3-1 PC Card Memory Mode Pin Assign ments

Pin No. Signal

Name Pin Type I/O Type Pin No. Signal

Name Pin Type I/O Type

1 GND – Ground 26 -CD1 O Ground

2 D03 I/O I1Z,OZ3 27 D11 I/O I1Z,OZ3

3 D04 I/O I1Z,OZ3 28 D12 I/O I1Z,OZ3

4 D05 I/O I1Z,OZ3 29 D13 I/O I1Z,OZ3

5 D06 I/O I1Z,OZ3 30 D14 I/O I1Z,OZ3

6 D07 I/O I1Z,OZ3 31 D15 I/O I1Z,OZ3

7 -CE1 I I3U 32 -CE2 I I3U

8 A10 I I1Z 33 -VS1 O Ground

9 -OE I I3U 34 -IORD I I3U

10 A09 I I1Z 35 -IOWR I I3U

11 A08 I I1Z 36 -WE I I3U

12 A07 I I1Z 37 RDY/BSY O OT1

13 VCC – Power 38 VCC – Power

14 A06 I I1Z 39 -CSEL I I2Z

15 A05 I I1Z 40 -VS2 O OPEN

16 A04 I I1Z 41 RESET I I2Z

17 A03 I I1Z 42 -WAIT O OT1

18 A02 I I1Z 43 -INPACK O OT1

19 A01 I I1Z 44 -REG I I3U

20 A00 I I1Z 45 BVD2 I/O I1U,OT1

21 D00 I/O I1Z,OZ3 46 BVD1 I/O I1U,OT1

22 D01 I/O I1Z,OZ3 47 D08 I/O I1Z,OZ3

23 D02 I/O I1Z,OZ3 48 D09 I/O I1Z,OZ3

24 WP O OT3 49 D10 I/O I1Z,OZ3

25 -CD2 O Ground 50 GND – Ground

Interface Description SanDisk CompactFlash Card OEM Product Manual

PC Card I/O Pin Assignments are contained in Table 3-2.

Table 3-2 PC Card I/O Mode Pin Assignments

Pin No. Signal

Name Pin Type I/O Type Pin No. Signal

Name Pin Type I/O Type

1 GND – Ground 26 -CD1 O Ground

2 D03 I/O I1Z,OZ3 27 D11 I/O I1Z,OZ3

3 D04 I/O I1Z,OZ3 28 D12 I/O I1Z,OZ3

4 D05 I/O I1Z,OZ3 29 D13 I/O I1Z,OZ3

5 D06 I/O I1Z,OZ3 30 D14 I/O I1Z,OZ3

6 D07 I/O I1Z,OZ3 31 D15 I/O I1Z,OZ3

7 -CE1 I I3U 32 -CE2 I I3U

8 A10 I I1Z 33 -VS1 O Ground

9 -OE I I3U 34 -IORD I I3U

10 A09 I I1Z 35 -IOWR I I3U

11 A08 I I1Z 36 -WE I I3U

12 A07 I I1Z 37 -IREQ O OT1

13 VCC – Power 38 VCC – Power

14 A06 I I1Z 39 -CSEL I I2Z

15 A05 I I1Z 40 -VS2 O OPEN

16 A04 I I1Z 41 RESET I I2Z

17 A03 I I1Z 42 -WAIT O OT1

18 A02 I I1Z 43 -INPACK O OT1

19 A01 I I1Z 44 -REG I I3U

20 A00 I I1Z 45 -SPKR I/O I1U,OT1

21 D00 I/O I1Z,OZ3 46 -STSCHG I/O I1U,OT1

22 D01 I/O I1Z,OZ3 47 D08 I/O I1Z,OZ3

23 D02 I/O I1Z,OZ3 48 D09 I/O I1Z,OZ3

24 -IOIS16 O OT3 49 D10 I/O I1Z,OZ3

25 -CD2 O Ground 50 GND – Ground

True IDE Mode Pin Assigments are contained in Table 3-3.

Table 3-3 True IDE Mode Pin Assign m e nt s

No. Signal

Name Pin Type I/O Type Pin No. Signal

Name Pin Type I/O Type

1 GND – Ground 26 -CD1 O Ground

2 D03 I/O I1Z,OZ3 27 D11 I/O I1Z,OZ3

3 D04 I/O I1Z,OZ3 28 D12 I/O I1Z,OZ3

4 D05 I/O I1Z,OZ3 29 D13 I/O I1Z,OZ3

5 D06 I/O I1Z,OZ3 30 D14 I/O I1Z,OZ3

6 D07 I/O I1Z,OZ3 31 D15 I/O I1Z,OZ3

7 -CS0 I I3Z 32 -CS1 I I3Z

8 A10 I I1Z 33 -VS1 O Ground

SanDisk CompactFlash Card OEM Product Manual Interface Description

Table 3-3 True IDE Mode Pin Assign m e nt s

No. Signal

Name Pin Type I/O Type Pin No. Signal

Name Pin Type I/O Type

9 -ATA SEL I I3U 34 -IORD I I3Z

10 A09 I I1Z 35 -IOWR I I3Z

11 A08 I I1Z 36 -WE I I3U

12 A07 I I1Z 37 INTRQ O OZ1

13 VCC – Power 38 VCC – Power

14 A06 I I1Z 39 -CSEL I I2U

15 A05 I I1Z 40 -VS2 O OPEN

16 A04 I I1Z 41 RESET I I2Z

17 A03 I I1Z 42 IORDY O OT1

18 A02 I I1Z 43 -DMARQ O OZ1

19 A01 I I1Z 44 -DMACK I I3U

20 A00 I I1Z 45 -DASP I/O I1U,ON1

21 D00 I/O I1Z,OZ3 46 -PDIAG I/O I1U,ON1

22 D01 I/O I1Z,OZ3 47 D08 I/O I1Z,OZ3

23 D02 I/O I1Z,OZ3 48 D09 I/O I1Z,OZ3

24 -IOCS16 O ON3 49 D10 I/O I1Z,OZ3

25 -CD2 O Ground 50 GND – Ground

3.2 Electrical Description

The CompactFlash Memory Card Series is optimized for operation with hosts, which suppo rt

the PCMCIA I/O interface standard conforming to the PC Card ATA specification. However ,

the card may also be configured to operate in systems that support only the memory interface

standard. The CompactFlash card configuration is controlled using the standard PCMCIA

configuration registers starting at address 200h in the Attribute Memory space of the card.

Ta ble 3-4 describes the I/O signals. Signals whose source is the host are designated as inputs

while signals that the card sources are outputs. SanDisk CompactFlash Memory Card logic

levels conform to those specified in Section 3.3 of the PCMCIA Release 2.1 Specification.

NOTE:The sleep-to-write and sleep-to-read times are the time it takes the

card to exit sleep mode when any command is issued by the host to

when the card is reading or writing. CompactFlash Memory cards do

not require a reset to exit sleep mode.

Interface Description SanDisk CompactFlash Card OEM Product Manual

The SanDisk CompactFlash Memory Card signals are described in Table 3-4.

Table 3-4 Signal Description

Signal Name Dir. Pin Description

A10-A0

(PC Card Memory Mode)

(PC Card I/O Mode)

A2-A0

(True IDE Mode)

A10-A3

(True IDE Mode)

8, 10, 11, 12, 14,

15, 16, 17, 18, 19,

18, 19, 20

These address lines, along with the -REG

signal, are used to select the following: I/O port

address registers within the card, memory-

mapped port address registers within the card,

a byte in the card's information structure and its

configuration control and status registers.

In True IDE Mode only A[2:0] is used to select

one of eight registers in the Task File.

In True IDE Mode these remaining address

lines should be grounded by the host.

BVD1

(PC Card Memory Mode)

-STSCHG

(PC Card I/O Mode)

-PDIAG

(True IDE Mode)

I/O 46 This signal is asserted high as the BVD1 signal

since a battery is not used with this product.

The Status Changed signal is asserted low to

alert the host to changes in the RDY/-BSY and

Write Protect states, while the I/O interface is

configured. Its use is controlled by the Card

Config. and Status Register.

In the True IDE Mode, this input/output is the

Pass Diagnostic signal in the master/slave

handshake protocol.

BVD2

(PC Card Memory Mode)

-SPKR

(PC Card I/O Mode)

-DASP

(True IDE Mode)

I/O 45 This output line is always driven to a high state

in Memory Mode since a battery is not required

for this product.

This output line is always driven to a high state

in I/O Mode since this product does not support

the audio function.

In the True IDE Mode, this input/output is the

Disk Active/Slave Present signal in the master/

slave handshake protocol.

-CD1, -CD2

(PC Card Memory Mode)

(PC Card I/O Mode)

(True IDE Mode)

O 26, 25 These Card Detect pins are connected to

ground on the card. They are used by the host

to determine if the card is fully inserted into its

socket.

-CE1, -CE2

(PC Card Memory Mode)

(PC Card I/O Mode)

-CS0, -CS1

(True IDE Mode)

I 7, 32 The Card Enable input signals are used both to

select the card and to indicate to the card

whether a byte or a word operation is being

performed. -CE2 always accesses the odd

byte of the word. -CE1 accesses the even byte

or the Odd byte of the word depending on A0

and -CE2. A multiplexing scheme based on

A0, -CE1, -CE2 allows 8 bit hosts to access all

data on D0-D7.

In True IDE Mode, -CS0 is the chip select for

the Task File registers while -CS1 is used to

select the Alternate Status Register and the

Device Control Register.

-CSEL

(PC Card Memory Mode)

(PC Card I/O Mode)

I 39 This signal is not used for PC Card Memory

Mode or PC Card I/O Mode.

SanDisk CompactFlash Card OEM Product Manual Interface Description

Table 3-4 Signal Description

Signal Name Dir. Pin Description

-CSEL

(True IDE Mode) This internally pulled up signal is used to

configure this device as a master or slave when

configured in the True IDE Mode. When this pin

is grounded, this device is configured as a

master. When the pin is open, this device is

configured as a slave.

D15-D00

(PC Card Memory Mode)

(PC Card I/O Mode)

D15-D00

(True IDE Mode)

I/O 31, 30, 29, 28, 27,

49, 48, 47, 6, 5, 4,

3, 2, 23, 22, 21

These lines carry the data, commands and

status information between the host and the

controller. D00 is the LSB of the Even Byte of

the word. D08 is the LSB of the Odd Byte of the

word.

In True IDE Mode, all Task File operations

occur in byte mode on the low order bus D00-

D07 while all data transfers are 16 bits using

D00-D15.

GND

(PC Card Memory Mode)

(PC Card I/O Mode)

(True IDE Mode)

-- 1, 50 Ground.

-INPACK

(PC Card Memory Mode)

-INPACK

(PC Card I/O Mode)

-DMARQ

(True IDE Mode)

O 43 This signal is not used in this mode.

The Input Acknowledge signal is asserted by

the card when it is selected and responding to

an I/O read cycle at the address that is on the

address bus. This signal is used by the host to

control the enable of any input data buffers

between the card and the CPU.

This signal is used for DMA data transfers

between host and device and is asserted by the

device when it is ready to transfer data to or

from the host. The direction of data transfer is

controlled by DIOR- and DIOW-. This signal is

used in a handshake manner with DMACK-

(i.e., the device waits until the host asserts

DMACK- before negating DMARQ, and

reasserting DMARQ if there is more data to

transfer).

-IORD

(PC Card Memory Mode)

-IORD

(PC Card I/O Mode)

(True IDE Mode)

I 34 This signal is not used in this mode.

This is an I/O read strobe generated by the

host. This signal gates I/O data onto the bus

from the card when the card is configured to

use the I/O interface.

-IOWR

(PC Card Memory Mode) I 35 This signal is not used in this mode.

Interface Description SanDisk CompactFlash Card OEM Product Manual

Table 3-4 Signal Description

Signal Name Dir. Pin Description

-IOWR

(PC Card I/O Mode)

(True IDE Mode)

The I/O write strobe pulse is used to clock I/O

data on the Card Data bus into the card

controller registers when the card is configured

to use the I/O interface.

The clocking will occur on the negative to

positive edge of the signal (trailing edge).

-OE

(PC Card Memory Mode)

-OE

(PC Card I/O Mode)

-ATA SEL

(True IDE Mode)

I 9 This is an output enable strobe generated by

the host interface. It is used to read data from

the card in Memory Mode and to read the CIS

and configuration registers.

In PC Card I/O Mode, this signal is used to read

the CIS and configuration registers.

To enable True IDE Mode this input should be

grounded by the host.

RDY/-BSY

(PC Card Memory Mode)

-IREQ

(PC Card I/O Mode)

INTRQ

(True IDE Mode)

O 37 In Memory Mode, this signal is set high when

the card is ready to accept a new data transfer

operation and held low when the card is busy.

The host memory card socket must provide a

pull-up resistor.

At power up and at reset, the RDY/-BSY signal

is held low (busy) until the card has completed

its power up or reset function. No access of any

type should be made to the card during this

time. The RDY/-BSY signal is held high

(disabled from being busy) whenever the

following condition is true: The card has been

powered up with +RESET continuously

disconnected or asserted.

I/O Operation–After the card has been

configured for I/O operation, this signal is used

as an interrupt request. This line is strobed low

to generate a pulse mode interrupt or held low

for a level mode interrupt.

In True IDE Mode, this signal is the active high

Interrupt Request to the host.

-REG

(PC Card Memory Mode)

-REG

(PC Card I/O Mode)

I 44 This Attribute Memory Select signal is used

during memory cycles to distinguish between

Common Memory and Register (Attribute)

Memory accesses: High for common memory,

and low for attribute memory.

The signal must also be active (low) during I/O

cycles when the I/O address is on the bus.

SanDisk CompactFlash Card OEM Product Manual Interface Description

Table 3-4 Signal Description

Signal Name Dir. Pin Description

-DMACK

(True IDE Mode) This signal is used by the host in response to

DMARQ to initiate DMA transfers.

NOTE: This signal may be negated by the host

to suspend the DMS transfer in process. For

Multiword DMA transfers, the device may

negate DMARQ with the tL specified time once

the DMACK- is asserted and reasserted again

at a later time to resume DMA operation.

Alternatively, if the device is able to continue

the data transfer, the device may leave

DMARQ asserted and wait for the host to

reassert DMACK-.

RESET

(PC Card Memory Mode)

(PC Card I/O Mode)

-RESET

(True IDE Mode)

I 41 When the pin is high, this signal resets the

card. The card is reset only at power-up if this

pin is left high or open from power-up. The card

is also reset when the Soft Reset bit in the Card

Configuration Option Register is set.

In the T rue IDE Mode this input pin is the active

low hardware reset from the host.

VCC

(PC Card Memory Mode)

(PC Card I/O Mode)

(True IDE Mode)

-- 13, 38 +5V, +3.3V power.

-VS1

-VS2

(PC Card Memory Mode)

(PC Card I/O Mode)

(True IDE Mode)

O 33, 40 Voltage Sense Signals. -VS1 is grounded so

that the CompactFlash Card CIS can be read at

3.3 volts and VS2 is open and reserved by

PCMCIA for a secondary voltage.

-WAIT

(PC Card Memory Mode)

-WAIT

(PC Card I/O Mode)

IORDY

(True IDE Mode)

O 42 SanDisk CompactFlash Memory cards do not

assert the -WAIT signal.

SanDisk CompactFlash Memory cards do not

assert the -WAIT signal.

SanDisk CompactFlash Memory cards, except

when in UDMA modes, do not assert an IORDY

signal.

-WE

(PC Card Memory Mode)

-WE

(PC Card I/O Mode)

-WE

(True IDE Mode)

I 36 This is a signal driven by the host and used for

strobing memory write data to the registers of

the card when it is configured in the Memory

Interface Mode. It is also used for writing the

configuration registers.

In PC Card I/O Mode, this signal is used for

writing the configuration registers.

In True IDE Mode this input signal is not used

and should be connected to VCC by the host.

(PC Card Memory Mode) O 24 Memory Mode–The CompactFlash Card does

not have a write-protect switch. This signal is

held low after the completion of the reset

initialization sequence.

Interface Description SanDisk CompactFlash Card OEM Product Manual

Table 3-4 Signal Description

Signal Name Dir. Pin Description

-IOIS16

(PC Card I/O Mode)

-IOCS16

(True IDE Mode)

I/O Operation–When the card is configured for

I/O Operation, pin 24 is used for the -I/O

Selected is 16 Bit Port (-IOIS16) function. A low

signal indicates that a 16-bit or odd-byte only

operation can be performed at the addressed

port.

This output signal is asserted low when this

device is expecting a word data transfer cycle.

3.3 Electrical Specification

All D.C. Characteristics for the CompactFlash Memory Card Series are defined as follows:

Typical conditions unless otherwise stated:

VCC = 5V +/- 10%

VCC = 3.3V +/- 5%

Ta = 0 °C to 60 °C

Absolute Maximum condit ions:

VCC = -0.3V min. to 6.5V max.

V* = 0.5V min. to VCC + 0.5V max.

*Voltage on any pin except VCC with respect to GND.

3.3.1 Input Leakage Control and Input Characteristics

In Ta ble 3-5, “x” refers to the characteristics described in Table 3-6. For example–"I1U"

indicates a pull-up resistor wit h a Type 1 input characteristic.

Table 3-5 Input Leakage Control

Type Parameter Symbol Conditions MIN MAX Unit

lxZ Input Leakage Current IL Vih=VCC/Vil=GND -1 1 uA

IxU Pull Up Resistor RPU1 VCC=5.0V 50k 500k Ohm

IxD Pull Down Resistor RPD1 VCC=5.0V 50k 500k Ohm

NOTE:The minimum pull-up resistor leakage current meets the PCMCIA

specification of 10k ohms but is intentionally higher in the

CompactFlash Memory Card Series product to reduce power use.

SanDisk CompactFlash Card OEM Product Manual Interface Description

Table 3-6 defines the input characteristics of the parameters in Table 3-5.

Table 3-6 Input Characteristics

Min. Typ. Max. Min. Typ. Max.

Type Parameter Symbol VCC = 3.3V VCC = 5.0V Unit

1 Input Voltage Vih 2.4 4.0 V

CMOS Vil 0.6 0.8

2 Input Voltage Vih 1.5 2.0 V

CMOS Vil 0.6 0.8

3 Input Voltage Vth 1.8 2.8 V

CMOS Vtl 1.0 2.0

Schmitt Trigger

3.3.2 Output Drive Type and Characteristics

In Table 3-7 "x" refers to the characteristics described in Table 3-8. For example–"OT3" refers

to Totempole output with a Type 3 output drive charact e ri stic.

Table 3-7 Output Drive Type

Type Output Type Valid Conditions

OTx Totempole loh & lol

OZx Tri-state N-P Channel loh & lol

OPx P-Channel Only loh only

ONx N-Channel Only loh Only

Table 3-8 Output Drive Characteristics

Type Parameter Symbol Conditions Min. Typ. Max. Unit

1 Output Voltage Voh loh= -4 mA VCC V

-0.8V

Vol lol= 4 mA Gnd

+0.4V

2 Output Voltage Voh loh= -8 mA VCC V

-0.8V

Vol lol= 8 mA Gnd

+0.4V

3 Output Voltage Voh loh= -8 mA VCC V

Vol lol= 8 mA -0.8V Gnd

+0.4V

X Tri-State

Leakage Current loz Vol = Gnd

Voh = VCC

-10 10 uA

--- ---

Interface Description SanDisk CompactFlash Card OEM Product Manual

3.3.3 Power Up/Power Down Timing

The timing specification in Table 3-9 was defined to permit peripheral cards to perform power-

up initialization.

Table 3-9 Power Up/Power Down Timing

Item Value

Symbol Condition

Vi (CE) 0V <VCC <2.0V 0 ViMAX

CE Signal Levela

2.0V <VCC <VIH <VCC - 0.1 ViMAX

<VIH <VCC VIH ViMAX

CE Setup T ime 20 ms TSU (VCC)

CE Setup T ime TSU (RESET) 20 ms

CE Recover Time 0.001 ms

TREC (VCC)

10%-->90% of (VCC + 5%) 0.1 300 ms

tpr

VCC Rising Timeb

90% of (VCC + 5%)-->10% 3.0 300 ms tpf

VCC Falling Timeb

Reset Width TW (RESET) 10 µs

Th (Hi-z Reset) 1 ms

TS (Hi-z Reset) 0 ms

Min. Max. Unit

a. ViMAX means Absolute Maximum Voltage for Input in the period of 0V <VCC <2.0V, Vi (CE) is only

0V~ViMAX.

b. The tpr and tpf are defined as "linear waveform" in the period of 10% to 90% or vice-versa. Even if

the waveform is not "linear waveform," its rising and falling time must be met by this specification.

Figure 3-1 Power Up/Power Down Timing for Systems supporting RESET

VCC

VIH

VCC Min.

rec

-CE1, -CE2

ts (Hi-z Reset)

Hi-z

tpf

tW(Reset)

VCC Min.

tW(Reset)

Reset

tpr tSU(VCC)

-CE1, -CE2

tSU(Reset) tSU(Reset)

th (Hi-z Reset)

Hi-z

VIH

---

SanDisk CompactFlash Card OEM Product Manual Interface Description

Figure 3-2 Power Up/Power Down Timing for Systems not supporting RESET

VCC

VCC Min.

VIH tSU(VCC)

-CE1, -CE2

Always Hi-z fr o m system Supp lied by pull-up resistor

RESET on c a rd (if present)

tpf

VIH

trec

VCC

VCC Min.

-CE1, -CE2

3.3.4 Common Memory Read Timing

Ta ble 3-10 contains common memory read timing specifications for all types of memory.

NOTE:All timings measured at the CompactFlash Memory Card. Skews and

delays from the system driver/receiver to the card must be accounted

for by the system.

Table 3-10 Common Memory Read Timing Specification

Speed Version Item Symbol

Read Cycle Time tc (R)

Address Access Timea ta (A)

Card Enable Access T ime ta (CE)

Output Enable Access Time ta (OE)

Output Disable Time from -OE tdis (OE)

Output Disable Time from -CE tdis (CE)

Output Enable Time from -CE ten (CE)

Output Enable Ti me from -OE ten (OE)

Data Valid from Add Changea tv (A)

Address Setup Time tsu (A)

100 ns

IEEE Symbol

100

tAVQV

tAVAV

100

tELQV 100

tGLQV 50

tGHQZ 50

tEHQZ 50

tELQNZ 5

tGLQNZ 5

tAXQX 0

tAVGL 10

Min. Max.

---

Interface Description SanDisk CompactFlash Card OEM Product Manual

Table 3-10 Common Memory Read Timing Specification

100 ns

Speed Version Item Symbol IEEE Symbol

Address Hold Time th (A) 15tGHAX

Card Enable Setup Time tsu(CE) 0tELGL

Card Enable Hold Time th (CE) 15tGHEH

Min. Max.

a. The -REG signal timing is identical to address signal timing

3.3.5 Common and Attribute Memo ry Write Timing

The write timing specifications for Common and Attribute memory are the same.

All timings measured at the CompactFlash Memory Card. Skews and delays from the system

driver/receiver to the card must be accounted for by the system

NOTE:SanDisk CompactFlash Memory cards do not assert the -WAIT

signal.

Table 3-11 Common and Attribute Memory Write Timing Specification

100 ns

Speed Version Symbol IEEE Symbol

Write Cycle T i me tc (W) 100 tAVAV

Write Pulse Width tw (WE) 60tWLWH

tsu (A) 10tAVWL

Address Setup Timea

tsu (A-WEH) 70tAVWH

Address Setup Time for -WEa

Card Enable Setup Time for -WE tsu(CE-WEH) 70tELWH

Data Setup Time form -WE tsu(D-WEH) 40tDVWH

Data H old Time th (D) 15tWMDX

Write Recover Time trec (WE) 15tWMAX

Output Disable Time from -WE 50

tdis (WE) tWLQZ

Output Disable Time from -OE tdis (OE) 50 tGHQZ

Output Enable Ti me from -W E ten (WE) 5tWHQNZ

Output Enable Ti me from -OE ten (OE) 5tGLQNZ

Output Enable Setup from -WE tsu(OE-WE) 10tGHWL

th(OE-WE) 10

Output Enable Hold from -WE tWHGL

Card Enable Setup Time tsu (CE) 0tELWL

Card Enable Hold Time th (CE) 15tGHEH

Min. Max.

a. The -REG signal timing is identical to address signal timing.

---

SanDisk CompactFlash Card OEM Product Manual Interface Description

3.3.6 Attribute Memory Read Timing Specification

Ta ble 3-12 contains common memory write timing specifications for all types of memory.

NOTE:SanDisk CompactFlash Memory cards do not assert the -WAIT

signal.

Table 3-12 Attribute Memory Read Timing Specification

300 ns

Speed Version Item Symbol IEEE Symbol

tc (R) 300

Read Cycle Time tAVAV

ta (A) 300tAVQV

Address Access Timea

ta (CE) 300

Card Enable Access T ime tELQV

Output Enable Access Time ta (OE) 150tGLQV

Output Disable Time from -OE tdis (OE) 100tGHQZ

Output Enable Ti me from -OE ten (OE) 5tGLQNZ

tv (A) 0tAXQX

Data Valid from Add Changea

Address Setup Time tsu (A) 30tAVGL

th (A) 20

Address Hold Time tGHAX

Card Enable Setup Time tsu(CE) 0tELGL

Card Enable Hold Time th (CE) 20tGHEH

Min. Max.

a. The -REG signal timing is identical to address signal timing

3.3.7 Memory Timing Diagrams

Figure 3-3 Common and Attribute Memory Read Timing Diagram

NOTE 1: Shaded areas may be high or low.

Interface Description SanDisk CompactFlash Card OEM Product Manual

Figure 3-4 Common and Attribute Memory Write Timing Diagram

NOTE 1: Shaded areas may be high or low.

NOTE 2: When the dat a I/O pins are in the output state, no signals shall be applied to

the data pins (D[15::0]) by the host system

NOTE 3: May be high or low for write timing, but restrictions on -OE from previous

figures apply.

NOTE 4: SanDisk CompactFlash Memory Cards do not assert the -WAIT signal.

SanDisk CompactFlash Card OEM Product Manual Interface Description

3.3.8 I/O Read (Input) Timing Specification

Figure 3-5 I/O Read Timing Diagram

NOTE 1: All timings are measured at the CompactFlash Memory Card.

NOTE 2: Skews and delays from the host system driver/receiver to the card must be

accounted for by the system design.

NOTE 3: D[15::0] signifies data provided by the card to the host system.

Ta ble 3-13 contains the read input timing specificati ons.

NOTE: SanDisk CompactFlash Memory cards do ont assert a -WAIT signal.

Table 3-13 I/O Read (Input) Timing Specification

Item Symbol IEEE Symbol Min. (ns) Max. (ns)

Data Delay after -IORD td (IORD) tlGLQV --- 100

Data Hold following -IORD th (IORD) tlGHQX 0 ---

-IORD Width Time tw (IORD) tlGLIGH 165 ---

Address Setup before -IORD tsuA(IORD) tAVIGL 70 ---

Address Hold following -IORD thA(IORD) tlGHAX 20 ---

-CE Setup before -IORD tsuCE(IORD) tELIGL 5 ---

-CE Hold following -IORD thCE(IORD) tlGHEH 20 ---

-REG Setup before -IORD tsuREG(IORD) tRGLIGL 5 ---

-REG Hold following -IORD thREG(IORD) tlGHRGH 0 ---

-INPACK Delay falling from -IORD tdfINPACK(IORD) tlGLIAL 0 45a

-INPACK Delay rising from -IORD tdrINPACK(IORD) tlGHIAH --- 45a

Interface Description SanDisk CompactFlash Card OEM Product Manual

Table 3-13 I/O Read (Input) Timing Specification

Item Symbol IEEE Symbol Min. (ns) Max. (ns)

-IOIS16 Delay falling from Address tdfIOIS16(ADR) tAVISL --- 35a

-IOIS16 Delay rising from Address t drIOIS16(ADR) tAVISH --- 35a

a. The maximum load on -INPACK and -IOIS16 is 1 LSTTL with 50 pF total load.

3.3.9 I/O Write (Output) Timing Specification

Figure 3-6 I/O Write Timing Diagram

NOTE 1: All timings are measured at the CompactFlash Memory Card.

NOTE 2: Skews and delays from the host system driver/receiver to the

CompactFlash Memory Card must be accounted for by the system design.

NOTE 3: D[15::0] signifies data provided by the host system to the CompactFlash

Memory Card.

SanDisk CompactFlash Card OEM Product Manual Interface Description

Table 3-14 contains the specification information rel ated to the I/O Wr ite Timing Diagram.

Table 3-14 I/O Write Timing Specification

Item Symbol IEEE Symbol Min. (ns) Max. (ns)

Data Setup before -IOWR tsu (IOWR) tDVIWL 60 ---

Data Hold following -IOWR th (IOWR) tWHDX 30 ---

-IOWR Width Time tw (IOWR) tlWLIWH 165 ---

Address Setup before -IOWR tsuA(IOWR) tAVIWL 70 ---

Address Hold following -IOWR thA(IOWR) tlWHAX 20 ---

-CE Setup before -IOWR tsuCE(IOWR) tELIWL 5 ---

-CE Hold following -IOWR thCE(IOWR) tlWHEH 20 ---

-REG Setup before -IOWR tsuREG(IOWR) tRGLIWL 5 ---

-REG Hold following -IOWR thREG(IOWR) tlWHRGH 0 ---

-IOIS16 Delay falling from Address tdfIOIS16(ADR) tAVISL --- 35a

-IOIS16 De lay rising from -IORD tdr-IOIS16(ADR) tAVISH --- 35

-IOIS16 Delay falling from Address tdfIOIS16(ADR) tAVISL --- 35

-IOIS16 Delay rising from Address tdrIOIS16(ADR) tAVISH --- 35

a. The maximum load on -IOIS16 is 1 LSTTL with 50 pF total load.

3.3.10 True IDE Mode

The following sections provide valuable inform ation for the True IDE mode.

De-skewing. The host will provide cable de-skewing for all signals originating from the

device. The device will provide cable de-skewing for all signal s originating at the host.

All timing values and diagram s are shown and measured at the connector of the selected

device.

Transfer Timing. The minimum cycle time supported by devices in PIO Mode 3, 4 and

Multiword DMA Mode 1, 2 respectively will alw a ys be greater than or equal to th e mini mu m

cycle time defined by the associated mode (e.g., a device supporting PIO Mode 4 ti ming will

not report a value less than 120 ns. The minimum cycle time defined for PIO mode 4 timings).

• Register Transfers

Figure 3-7 defines the relationships between the interface signals for register transfers.

For PIO Modes 3 and above, the minimum value of t0 is specified by Word 68 in the

IDENTIFY DEVICE parameter list. Table 3-15 defines the mini mu m value that will be

placed in Word 68.

In Figure 3-7, all signals shown with the asserted condition facing the top of the page. The

negated condition is shown toward the bottom of the page relative to the asserted condi-

tion.

NOTE: SanDisk CompactFlash Memory cards do not assert an -IORDY

signal.

Interface Description SanDisk CompactFlash Card OEM Product Manual

Figure 3-7 Register Transfer to/from Device

NOTE 1: Device address consists of signals -CS0, -CS1 and -DA(2:0).

NOTE 2: Data consists of DD(7:0).

Table 3-15 Register Transfer to/from Device

PIO Timing Parameters Mode 4 (ns)

a Cycle time (min.) 120

t1 Address valid to IORD-/IOWR- setup (min.) 25

a IORD-/IOWR- pulse width 8-bit (min.) 70

t2i

a IORD-/IOWR- recovery time (min.) 25

t3 IOWR- data setup (min.) 20

t4 IOWR- data hold (min.) 10

t5 IORD- data setup (min.) 20

t6 IORD- data hold (min.) 5

t6z

b IORD- data tri-state (max.) 30

t9 IORD-/IOWR- to address valid hold (min.) 10

a. t0 is the minimum total cycle time, t2 is the minimum command active time, and t2i is the minimum

command recovery time or command inactive time. The actual cycle time equals the sum of the

actual command active time and the actual command inactive time. The three timing requirements

of t0, t2, and t2i shall be met. The minimum total cycle time requirements are greater than the sum of

t2 and t2i. This means a host implementation may lengthen either or both t2 or t2i to ensure that t0 is

equal to or greater than the value reported in the devices IDENTIFY DEVICE data. A device imple-

mentation shall support any legal host implementation.

b. This parameter specifies the time from the negation edge of /IORD to the time that the data bus is

no longer driven by the device (tri-state).

SanDisk CompactFlash Card OEM Product Manual Interface Description

• PIO Data Transfers

Figure 3-8 defines the relationships between the interface signals for PIO data transfers.

For PIO Modes 3 and above, the minimum value of t0 is specified by Word 68 in the

IDENTIFY DEVICE parameter list. Table 3-16 defines the mini mu m value that will be

placed in Word 68.

Figure 3-8 PIO Data Transfer to/from Device

NOTE 1: Device address consists of signals -CS0, -CS1 and -DA(2:0).

NOTE 2: Data consists of DD(15:0).

Interface Description SanDisk CompactFlash Card OEM Product Manual

The PIO data transfer parameters are defined in Table 3-16.

NOTE:SanDisk CompactFlash Memory cards do not assert an -IORDY

signal.

Table 3-16 PIO Data Transfer to/from Device

PIO Timing Parameters Mode 0

(ns) Mode 1

(ns) Mode 2

(ns) Mode 3

(ns) Mode 4

(ns)

a Cycle time (min.) 600 383 240 180 120

t1 Address valid to IORD-/IOWR- setup

(min.) 70 50 30 30 25

a IORD-/IOWR- pulse width 16-bit (min.) 165 125 100 80 70

t2ia IORD-/IOWR- recovery time (min.) --- --- --- 70 25

t3 IOWR- data setup (min.) 60 45 30 30 20

t4 IOWR- data hold (min.) 30 20 15 10 10

t5 IORD- data setup (min.) 50 35 20 20 20

t6 IORD- data hold (min.) 5 5 5 5 5

t6z

b IORD- data tri-state (max.) 30 30 30 30 30

t9 IORD-/IOWR- to address valid hold

(min.) 20 15 10 10 10

a. t0 is the minimum total cycle time, t2 is the minimum command active time, and t2i is the minimum

command recovery time or command inactive time. The actual cycle time equals the sum of the

actual command active time and the actual command inactive time. The three timing requirements of

t0, t2, and t2i shall be met. The minimum total cycle time requirements are greater than the sum of t2

and t2i. This means a host implementation may lengthen either or both t2 or t2i to ensure that t0 is

equal to or greater than the value reported in the devices IDENTIFY DEVICE data. A device imple-

mentation shall support any legal host implementation.

b. This parameter specifies the time from the negation edge of /IORD to the time that the data bus is no

longer driven by the device (tri-state).

3.4 Card Configuration

SanDisk CompactFlash Memory cards are identified by appropriate information in the Card

Information Structure (CIS). The configuration registers are used to coordinate the I/O spaces

and the interrupt level of cards that are located in the system.

SanDisk CompactFlash Card OEM Product Manual Interface Description

In addition, these registers provide a method for accessing status information about the card

that may be used to arbitrate between multiple in terrupt sources on the same interrupt level or

to replace status information that appears on dedicated pins in memory cards that have

alternate use in I/O cards.

Table 3-17 Registers and Memory Space Decoding

-CE2

-CE1

-REG

-OE

-WE

A10

A8-

Selected Space

Standby

X 0 0 0 1 X 1 XX X X X 0 Configuration Registers

Read

1 0 1 0 1 X X XX X X X X Common Memory Read

(8-bit D7-D0)

0 1 1 0 1 X X XX X X X X Common Memory Read

(8-bit D15-D8)

0 0 1 0 1 X X XX X X X 0 Common Memory Read

(16-bit D15-D0)

X 0 0 1 0 X 1 XX X X X 0 Configuration Registers

Write

1 0 1 1 0 X X XX X X X X Common Memory Write (8-

bit D7-D0)

0 1 1 1 0 X X XX X X X X Common Memory Write (8-

bit D15-D8)

0 0 1 1 0 X X XX X X X 0 Common Memory Write

(16-bit D15-D0)

X 0 0 0 1 0 0 XX X X X 0 Card Info Structure Read

1 0 0 1 0 0 0 XX X X X 0 Invalid Access (CIS Write)

1 0 0 0 1 X X XX X X X 1 Invalid Access ( O dd

Attribute Read)

1 0 0 1 0 X X XX X X X 1 Invalid Access (Odd

Attribute Write)

0 1 0 0 1 X X XX X X X X Invalid Access ( O dd

Attribute Read)

0 1 0 1 0 X X XX X X X X Invalid Access ( O dd

Attribute Write)

NOTE:The location of the card configuration registers should always be

read from the CIS since these locations may vary in futu re products.

No writes should be performed to the card attribute memory except

to the card configuration register addresses. All other attribute

memory locations are reserved.

Interface Description SanDisk CompactFlash Card OEM Product Manual

Decoding for the configuration registers is defi ned in Table 3-18.

Table 3-18 Configuration Registers Decoding

-CE2

-CE1

-REG

-OE

-WE

A10

A8-

Selected Register

Configuration Option Read

X 0 0 1 0 0 1 00 0 0 0 0 Configuration Option Write

X 0 0 0 1 0 1 00 0 0 1 0 Card Status Read

X 0 0 1 0 0 1 00 0 0 1 0 Card Status Write

X 0 0 0 1 0 1 00 0 1 0 0 Pin Replacement Read

X 0 0 1 0 0 1 00 0 1 0 0 Pin Replacement Write

X 0 0 0 1 0 1 00 0 1 1 0 Socket and Copy Read

X 0 0 1 0 0 1 00 0 1 1 0 Socket and Copy Write

3.4.1 Attri bu t e Me mo ry Fu n c tio n

Attribute Memory is a space where a CompactFlash Memory Card identification and

configuration information is stored, and is limited to 8-bit wide accesses only at even

addresses. The card configuration registers are also located there.

For the Attribute Memory Read function, signals -R EG and -OE must be active and -WE

inactive during the cycle. As in the Main Memory Read functions, the signals -CE1 and -CE2

control the even-byte and odd-byte address, but only the even-byte data is valid during the

Attribute Memory access. Refer to Table 3-19 for signal states and bus validity for the

Attribute Memory function.

NOTE:The -CE signal or both the -OE and -W E signal must be de-asserted

between consecutive cycle operaitons.

Table 3-19 Attribute Memory Function

Function Mode -REG -CE2 -CE1 A9 A0 -OE -WE D15-D8 D7-D0

Standby X H H X X X X High Z High Z

Read Byte Access CIS ROM

(8 bits) L H L L L L H High Z Even

Byte

Write Byte Access CIS (8 bits)

(Invalid) L H L L L H L Don’t

Care Even

Byte

Read Byte Access

Configuration (8 bits) L H L H L L H High Z Even

Byte

Write Byte Access

Configuration (8 bits) L H L H L H L Don’t

Care Even

Byte

Read Word Access CIS

(16 bits) L L L L X L H Not Valid Even

Byte

Write Word Access CIS

(16 bits) (Invalid) L L L L X H L Don’t

Care Even

Byte

Read Word Access

Configuration (16 bits) L L L H X L H Not Valid Even

Byte

Write Word Access

Configuration (16 bits) L L L H X H L Don’t

Care Even

Byte

SanDisk CompactFlash Card OEM Product Manual Interface Description

3.4.2 Configuration Option Register (Address 200h in Attribute Memory)

The Configuration Option Register is used to configure the card’s interface, address decoding

and interrupt and to issue a soft reset to the CompactFlash Memory Card.

Operation D7 D6 D5 D4 D3 D2 D1 D0

R/W SRESET LevIREQ Conf5 Conf4 Conf3 Conf2 Conf1 Conf0

Bit

D5-D0

Name

SRESET

LevIREQ

Conf 5–Conf0

Description

Setting this bit to one (1), waiting the minimum reset width time and

returning to zero (0) places the card in the Reset state. Setting this bit to "1"

is equivalent to assertion of the +RESET signal except that the SRESET bit

is not cleared. Returning this bit to "0" leaves the card in the same un-

configured, Reset state as following power-up and hardware reset. This bit

is set to "0" by power-up and hardware reset. Using the PCMCIA Soft

Reset is considered a hard Reset by the ATA Commands. Contrast with

Soft Reset in the Device Control Register .

This bit is set to "1" when Level Mode Interrupt is selected, and"0" when

Pulse Mode is selected. Set to "0" by Reset.

Configuration Index. Set to "0" by reset. It's used to select operation mode

of the card as shown below. NOTE: Conf5 and Conf4 are reserved and

must be written as "0".

Table 3-20 Card Configurations

Conf5 Conf4 Conf3 Conf2 Conf1 Conf0 Disk Card Mode

0 0 0 0 0 0 Memory Mapped

0 0 0 0 0 1 I/O Mapped; any 16-byte system

decoded boundary

0 0 0 0 1 0 I/O Mapped; 1F0-1F7/3F6-3F7

0 0 0 0 1 1 I/O Mapped; 170-177/376-377

3.4.3 Card Configuration and Status Register (Address 202h in Attribute Memory)

The Card Configuration and Status Register contain information about the card's condition.

Operation D7 D6 D5 D4 D3 D2 D1 D0

Read Changed SigChg IOis8 0 0 PwrDwn Int 0

Write 0 SigChg IOis8 0 0 PwrDwn 0 0

Interface Description SanDisk CompactFlash Card OEM Product Manual

Card Configuration and Status Register (con’t)

Bit Name Description

D7 Changed Indicates that one or both of the Pin Replacement Register CRdy, or

CWProt bits are set to "1". When the Changed bit is set, -STSCHG Pin 46

is held low if the SigChg bit is a "1" and the card is configured for the I/O

interface.

D6 SigChg This bit is set and reset by the host to enable and disable a state-change

"signal" from the Status Register, the Changed bit control pin 46 the

Changed Status signal. If no state change signal is desired, this bit should

be set to zero "0" and pin 46 (-STSCHG) signal will be held high while the

card is configured for I/O

D5 IOis8 The host sets this bit to a one "1" if the card is to be configured in an 8-bit

I/O mode. The card is always configured for both 8- and 16-bit I/O, so this

bit is ignored.

D2 PwrDwn This bit indicates whether the host requests the card to be in the power

saving or active mode. When the bit is "1", the card enters a power down

mode. When "0", the host is requesting the card to enter the active mode.

The PCMCIA Rdy/-Bsy value becomes BUSY when this bit is changed.

Rdy/-Bsy will not become Ready until the power state requested has been

entered. The card automatically powers down when it is idle and powers

back up when it receives a command

D1 Int This bit represents the internal state of the interrupt request. This value is

available whether or not I/O interface has been configured. This signal

remains true until the condition that caused the interrupt request has been

serviced. If interrupts are disabled by the -IEN bit in the Device Control

3.4.4 Pin Replacement Register (Address 204h in Attribute Memory)

The Pin Replacement Register informat ion i s described below.

Operation D7 D6 D5 D4 D3 D2 D1 D0

Read 0 0 CRdy/-Bsy CWProt 1 1 RRdy/-Bsy RWProt

Write 0 0 CRdy/-Bsy CWProt 0 0 MRdy/-Bsy MWProt

Bit Name Description

D5 CRdy/-Bsy This bit is set to "1" when the bit RRdy/-Bsy changes state. This bit can also

be written by the host.

D4 CWProt This bit is set to "1" when the RWprot changes state. This bit may also be

written by the host.

D1 RRdy/-Bsy This bit is used to determine the internal state of the Rdy/-Bsy signal. This

bit may be used to determine the state of the Ready/-Busy as this pin has

been reallocated for use as Interrupt Request on an I/O card. When written,

this bit acts as a mask for writing the corresponding bit CRdy/-Bsy.

MRdy/-Bsy This bit acts as a mask for writing the corresponding bit CRdy/-Bsy.

D0 RWProt This bit is always "0" because the card does not have a write-protect

switch. When written, this bit acts as a mask for writing the corresponding

bit CWProt.

MWProt This bit when written acts as a mask for writing the corresponding bit

CWProt.

SanDisk CompactFlash Card OEM Product Manual Interface Description

Pin replacement changed bit/mask values are contained in Table 3-21.

Table 3-21 Pin Replacement Changed Bit/Mask Bit Values

Written by Host

Initial Value of

0 X 0 0 Unchanged

1 X 0 1 Unchanged

X 0 1 0 Cleared by host

X 1 1 1 Set by host

3.4.5 Socket and Copy Register (Ad dress 206h in Attribute Memory)

This register contains additional configuration information. This register is always written by

the system before writing the card's Configuratio n Index Register.

Operation D7 D6 D5 D4 D3 D2 D1 D0

Read Reserved 0 0 Drive# 0 0 0 0

Write 0 0 0 Drive# (0) X X X X

Bit

D3-D0

(write)

Name

Reserved

Drive#

Description

This bit is reserved for future standardization. This bit must be set to "0" by

the software when the register is written.

This bit indicates the drive number of the card if twin card configuration is

supported.

The socket number is ignored by the card.

3.5 I/O Transfer Function

The following sections provide valuab le inform ation for the I/O Transfer function.

3.5.1 Common Memory Function

The Common Memory transfer to or from SanDisk CompactFlash memory cards can be either

8 or 16 bits. The card permits both 8- and 16-bit accesses to all of its Common Memory

addresses.

Table 3-22 Common Memory Function

Function Code -REG -CE2 -CE1 A0 -OE -WE D15-D8 D7-D0

Standby X H H X X X High Z High Z

Byte Read Access H H L L L H High Z Even Byte

(8 bits) H H L H L H High Z Odd Byte

Byte Write Access H H L L H L Don’t Car e Even Byte

(8 bits) H H L H H L Don’t Care Odd Byte

Interface Description SanDisk CompactFlash Card OEM Product Manual

Table 3-22 Common Memory Function

Function Code -REG -CE2 -CE1 A0 -OE -WE D15-D8 D7-D0

Word Read Access

(16 bits) H L L X L H Odd Byte Even Byte

Word Write Access

(16 bits) H L L X H L Odd Byte Even Byte

Odd Byte Read Only

(8 bits) H L H X L H Odd Byte High Z

Odd Byte Write Only

(8 bits) H L H X H L Odd Byte Don’t Care

3.6 True IDE Mode I/O Transfer Function

This section contains valuable information on the True IDE Mode I/O Transfer function.

3.6.1 True IDE Mode I/O Function

SanDisk CompactFlash Memory cards can be configured in a True IDE Mode of operation.

Cards are configured in this mode only when the -O E input signal is grounded by the host

when power is applied to the cards. In this True IDE Mode, the PCMCIA protocol and

configuration are disabled an d only I/O operations to the Task File and Data Register are

allowed. In this mode, no Memory or Attribute registers are accessible to the host.

CompactFlash cards permit 8-bit data accesses if the user issues a Set Feature Command to put

the device in 8-bit Mode.

NOTE:Removing and reinserting the card while the host computer's power

is on will reconfigure it to PC Card ATA mode from the original T rue

IDE Mode. To configure the card in True IDE Mode, the 50-pin

socket must be power cycled with the card inserted and -OE (output

enable) grounded by the host.

Ta b le 3-2 3 defi nes the fun ction o f the op erations for the True IDE Mode.

Table 3-23 IDE Mode I/O Function

Function Code -CE2 -CE1 A0 -IORD -IOWR D15-D8 D7-D0

Invalid Mode L L X X X High Z High Z

Standby Mode H H X X X High Z High Z

Task File Write H L 1.7h H L D o n ’t ca r e Data In

Task File Read H L 1-7h L H High Z Data Out

Data Register Write H L 0 H L Odd Byte in Even Byte In

Data Register Read H L 0 L H Odd Byte Out Even Byte Out

Control Registe r Write L H 6h H L Don’t Care Control In

Alt Status Read L H 6h L H High Z Status Out

CHAPTER 4 ATA Register Set and Protocol

SanDisk CompactFlash Memory cards can be configured as a high performance I/O device

through the following wa ys:

•Standard PC-AT disk I/O address spaces 1F0h-1F7h, 3F6h-3F7h (primary); 170h-177h ,

376h-377h (secondary) with IRQ 14 (o r other available IRQ).

•Any system decoded 16-byte I/O block using any available IRQ.

•Memory space.

The communication to or from the card is done using the Task File registers, which provide all

the necessary registers for control and status information. The PCMCIA interface connects

peripherals to the host using four register mapping methods. Table 4-1 is a detailed description

of these methods.

Table 4-1 St andard I/O Configurations

Config Index I/O or Memory Address Drive Description

0 Memory 0-F, 400-7FF 0 Memory Mapped

1 I/O XX0-XXF 0 I/O Mapped 16 Contiguous

Registers

2 I/O 1F0-1F7, 3F6-3F7 0 Primary I/O Mapped Drive 0

2 I/O 1F0-1F7, 3F6-3F7 1 Primary I/O Mapped Drive 1

3 I/O 170-177, 376-377 0 Secondary I/O Mapped Drive 0

3 I/O 170-177, 376-377 1 Secondary I/O Mapped Drive 1

4.1 I/O Primary and Secondary Address Configurations

Ta ble 3-2 contains configurations for primary and secondary I/O decodi ng.

Table 4-2 Primary and Secondary I/O Decoding

-REG A9-A4 A3 A2 A1 A0 -IORD=0 -IOWR=0

0 1F(17) 0 0 0 0

Even RD Dataa,b Even WR Data a,b

0 1F(17) 0 0 0 1

Error Registera Featuresa

0 1F(17) 0 0 1 0 Sector Count Sector Count

0 1F(17) 0 0 1 1 Sector No. Sector No.

0 1F(17) 0 1 0 0 Cylinder Low Cylinder Low

0 1F(17) 0 1 0 1 Cylinder High Cylinder High

0 1F(17) 0 1 1 0 Select Card/Head Select Card/Head

0 1F(17) 0 1 1 1 Status Command

0 3F(37) 0 1 1 0 Alt Status Device Control

0 3F(37) 0 1 1 1 Drive Address Reserved

ATA Register Set and Protocol SanDisk CompactFlash Card OEM Product Manual

a. Register 0 is accessed with -CE1 low and -CE2 low (and A0 = Do not care) as a word register on the

combined Odd Data Bus and Even Data Bus (D15-D0). This register may also be accessed by a pair

of byte accesses to the offset 0 with -CE1 low and -CE2 high. Note that the address space of this

word register overlaps the address space of the Error and Feature byte-wide registers that lie at off-

set 1. When accessed twice as byte register with CE1 low, the first byte to be accessed is the even

byte of the word and the second byte accessed is the odd byte of the equivalent word access.

b. A byte access to register 0 with CE1 high and CE2 low accesses the error (read) or feature (write)

4.2 Contiguous I/O Mapped Addressing

When the system decodes a contiguous block of I/O registers to select a CompactFlash

Memory Card, the registers are accessed in the block of I/O space decoded by the system as

follows:

Table 4-3 Contiguous I/O Decoding

-REG A3 A2 A1 A0 Offset -IORD=0 -IOWR=0

0 0 0 0 0 0 Even RD Dataa Even WR Dataa

0 0 0 0 1 1 Error Registerb Featuresb

0 0 0 1 0 2 Sector Count Sector Count

0 0 0 1 1 3 Sector No. Sector No.

0 0 1 0 0 4 Cylinder Low Cylinder Low

0 0 1 0 1 5 Cylinder High Cylinder High

0 0 1 1 0 6 Select Card/Head Select Card/Head

0 0 1 1 1 7 Status Command

0 1 0 0 0 8

Dup Even RD Datab Dup Even WR Datab

0 1 0 0 1 9 Dup Odd RD Datab Dup Odd WR Datab

0 1 1 0 1 D Dup Errorb Dup Featuresb

0 1 1 1 0 E Alt Status Device Ctl

0 1 1 1 1 F Drive Address Reserved

a. Register 0 is accessed with -CE1 low and -CE2 low (and A0 = Do not care) as a word register on the

combined Odd Data Bus and Even Data Bus (D15-D0). This register may also be accessed by a pair

of byte accesses to the offset 0 with -CE1 low and -CE2 high. Note that the address space of this

word register overlaps the address space of the Error and Feature byte-wide registers that lie at off-

set 1. When accessed twice as byte register with CE1 low, the first byte to be accessed is the even

byte of the word and the second byte accessed is the odd byte of the equivalent word access. A

byte access to register 0 with CE1 high and CE2 low accesses the error (read) or feature (write)

b. Registers at offset 8, 9 and D are non-overlapping duplicates of the registers at offset 0 and 1.

ters are byte accessed in the order 9 then 8 the data will be transferred odd byte then even byte.

Repeated byte accesses to register 8 or 0 will access consecutive (even than odd) bytes from the

data buffer. Repeated word accesses to register 8, 9 or 0 will access consecutive words from the

data buffer. Repeated byte accesses to register 9 are not supported. However, repeated alternating

byte accesses to registers 8 then 9 will access consecutive (even then odd) bytes from the data

buffer. Byte accesses to register 9 access only the odd byte of the data.

SanDisk CompactFlash Card OEM Product Manual ATA Register Set and Protocol

4.3 Memory Mapped Addressing

When CompactFlash Memory Card registers are accessed via memo ry references, they appear

in the common memory space window: 0-2K bytes as shown in Table 4-4.

Table 4-4 Memory Mapped Decoding

-REG A10 A9-

A4 A3 A2 A1 A0 Offset -OE=0 -WE=0

1 0 X 0 0 0 0 0 Even RD Dataa Even WR Dataa

1 0 X 0 0 0 1 1 Error Registerb Featuresb

1 0 X 0 0 1 0 2 Sector Count Sector Count

1 0 X 0 0 1 1 3 Sector No. Sector No.

1 0 X 0 1 0 0 4 Cylinder Low Cylinder Low

1 0 X 0 1 0 1 5 Cylinder High Cylinder High

1 0 X 0 1 1 0 6 Select Card/Head Select Card/Head

1 0 X 0 1 1 1 7 Status Command

1 0 X 1 0 0 0 8 Dup Even RD Datab Dup Even WR Datab

1 0 X 1 0 0 1 9 Dup Odd RD Datab Du p O dd WR Datab

1 0 X 1 1 0 1 D Dup Errorb Dup F ea turesb

1 0 X 1 1 1 0 E Alt Status Device Ctl

1 0 X 1 1 1 1 F Drive Address Reserved

1 1 X X X X 0 8 Even RD Datac Even WR Datac

1 1 X X X X 1 9 Odd RD Datac Even RD Datac

a. Register 0 is accessed with -CE1 low and -CE2 low (and A0 = Do not care) as a word register on the

combined Odd Data Bus and Even Data Bus (D15-D0). This register may also be accessed by a pair

of byte accesses to the offset 0 with -CE1 low and -CE2 high. Note that the address space of this

word register overlaps the address space of the Error and Feature byte-wide registers that lie at off-

set 1. When accessed twice as byte register with CE1 low, the first byte to be accessed is the even

byte of the word and the second byte accessed is the odd byte of the equivalent word access. A byte

access to register 0 with CE1 high and CE2 low accesses the error (read) or feature (write) register.

b. Registers at offset 8, 9 and D are non-overlapping duplicates of the registers at offset 0 and 1.

ters are byte accessed in the order 9 then 8 the data will be transferred odd byte then even byte.

Repeated byte accesses to register 8 or 0 will access consecutive (even than odd) bytes from the

data buffer. Repeated word accesses to register 8, 9 or 0 will access consecutive words from the data

buffer. Repeated byte accesses to register 9 are not supported. However, repeated alternating byte

accesses to registers 8 then 9 will access consecutive (even then odd) bytes from the data buffer.

Byte accesses to register 9 access only the odd byte of the data.

c. Accesses to even addresses between 400h and 7FFh access register 8. Accesses to odd addresses

between 400h and 7FFh access register 9. This 1 KByte memory window to the data register is pro-

vided so that hosts can perform memory to memory block moves to the data register when the regis-

ter lies in memory space. Some hosts, such as the X86 processors, must increment both the source

and destination addresses when executing the memory to memory block move instruction. Some

PCMCIA socket adapters also have auto incrementing address logic embedded within them. This

address window allows these hosts and adapters to function efficiently.

Note that this entire window accesses the Data Register FIFO and does not allow random access to

the data buffer within the card.

ATA Register Set and Protocol SanDisk CompactFlash Card OEM Product Manual

4.4 True IDE Mode Addressing

When a CompactFlash Memory Card is configured in the True IDE Mode the I/O decodi ng is

as listed in Table 4-5.

Table 4-5 True IDE Mode I/O Decoding

-CE2 -CE1 A2 A1 A0 -IORD=0 -IOWR=0

1 0 0 0 0 Even RD Data Even WR Data

1 0 0 0 1 Error Register Features

1 0 0 1 0 Sector Count Sector Count

1 0 0 1 1 Sector No. Sector No.

1 0 1 0 0 Cylinder Low Cylinder Low

1 0 1 0 1 Cylinder High Cylinder High

1 0 1 1 0 Select Card/Head Select Card/Head

1 0 1 1 1 Status Command

0 1 1 1 0 Alt Status Device Control

0 1 1 1 1 Drive Address Reserved

4.5 ATA Registers

In accordance with the PCMCIA specification: each of the registers below which is located at

an odd offset address may be accessed at its normal address and also the corresponding even

address (normal address -1) using data bus lines (D15-D8) when -CE1 is high and -CE2 is low

unless -IOIS16 is high (not asserted) and an I/O cycle is being performed.

4.5.1 Data Register (Address–1F0[170]; Offset 0, 8, 9)

The Data Register is a 16-bit register, and it is used to transfer data blocks between the

CompactFlash Memory Card data buffer and the host. This register overlaps the Error

is provided to assist in understanding the overlapped Data Register and Error/Feature Register

rather than attempt to define general PCMCIA word and byte access modes and operations.

Refer to the PCMCIA PC Card St andard Release 2.0 for definitions of the Card Accessing

modes for I/O and memory cycles.

NOTE:Because of the overlapped registers, access to the 1F1, 171 or of fset 1

are not defined for word (-CE2 = 0 and -CE1 = 0) operations.

SanDisk products treat these accesses as accesses to the Word Data

restrictions on the operations that can be performed by the so cket.

Table 4-6 Data Register

Data Register CE2- CE1- A0 Offset Data Bus

Word Data Register 0 0 X 0,8,9 D15-D0

Even Data Register 1 0 0 0,8 D7-D0

Odd Data Register 1 0 1 9 D7-D0

Odd Data Register 0 1 X 8,9 D15-D0

Error/Feature Register 1 0 1 1,Dh D7-D0

SanDisk CompactFlash Card OEM Product Manual ATA Register Set and Protocol

Table 4-6 Data Register

Data Register CE2- CE1- A0 Offset Data Bus

Error/Feature Register 0 1 X 1 D15-D0

Error/Feature Register 0 0 X Dh D15-D0

4.5.2 Error Register (Address–1F1[171]; Offset 1, 0Dh Read Only)

This register contains additional information about the source of an error when an error is

indicated in bit 0 of the Status Register. The bits are defined as follows:

D7 D6 D5 D4 D3 D2 D1 D0

BBK UNC 0 IDNF 0 ABRT 0 AMNF

This register is also accessed on data bits D15-D8 during a write operation to offset 0 with -

CE2 low and -CE1 high.

Bit Name Description

D7 BBK Set when a bad block is detected.

D6 UNC Set when an uncorrectable error is encountered.

D5 0 Bit set to 0.

D4 IDNF The requested sector ID is in error or cannot be found.

D3 0 Bit set to 0.

D2 ABRT Set if the command has been aborted because of a card status condition:

(Not Ready, Write Fault, etc.) or when an invalid command has been

issued.

D1 0 Bit set to 0.

D0 AMNF Set in case of a general error.

4.5.3 Feature Register (Add ress–1F1[171]; Offset 1, 0Dh Write Only)

This register provides information about CompactFlash Memory Card features the host can

utilize. This register is also accessed on data bits D15-D8 during a write operation to Offset 0

with CE2 low and -CE1 high.

4.5.4 Sector Count Register (Address–1F2[172]; Offset 2)

This register contains the number of sectors of data requested to be transferred on a read or

write operation between the host and the card. If the value in this register is zero, a count of

256 sectors is specified. If the command was successful, this register is “0” at command

completion. If not successfully completed, the register contains the number of sectors that

need to be transferred in order to complete the request.

4.5.5 Sector Number (LBA 7-0) Register (Address–1F3[173]; Offset 3)

This register contains the starting sector number or bits 7-0 of the Logical B lock Ad dress

(LBA) for any CompactFlash Memory Card data access for the subsequent command.

ATA Register Set and Protocol SanDisk CompactFlash Card OEM Product Manual

4.5.6 Cylinder Low (LBA 15-8) Register (Address–1F4[174]; Offset 4)

This register contains the low order 8 bits of the starting cylinder address or bits 15-8 of the

Logical Block Address.

4.5.7 Cylinder High (LBA 23-16) Register (Address–1F5[175]; Offset 5)

This register contains the high order bits of the starting cylinder address or bits 23-16 of the

Logical Block Address.

4.5.8 Drive/Head (LBA 27-24) Register (Address–1F6[176]; Offset 6)

The Drive/Head Register is used to select the drive and head. It is also used to select LBA

addressing instead of cylinder/head/sector addressing. The bits are defined as follows:

D7 D6 D5 D4 D3 D2 D1 D0

1 LBA 1 DRV HS3 HS2 HS1 HS0

Bit Name Description

D7 1 Bit set to 1.

D6 LBA LBA is a flag to select either Cylinder/Head/Sector (CHS) or Logical Block

Address Mode (LBA). When LBA=0, Cylinder/Head/Sector mode is

selected. When LBA=1, Logical Block Address is selected. In Logical Block

Mode, the Logical Block Address is interpreted as follows:

LBA07-LBA00: Sector Number Register D7-D0.

LBA15-LBA08: Cylinder Low Register D7-D0.

LBA23-LBA16: Cylinder High Register D7-D0.

LBA27-LBA24: Drive/Head Register bits HS3-HS0.

D5 1 Bit set to 1.

D4 DRV This bit will have the following meaning. DRV is the drive number. When

DRV=0, drive (card) 0 is selected When DRV=1, drive (card) 1 is selected.

The CompactFlash Card is set to be Card 0 or 1 using the copy field of the

PCMCIA Socket & Copy configuration register.

D3 HS3 When operating in the Cylinder , Head, Sector mode, this is bit 3 of the

head number. It is Bit 27 in the Logical Block Address mode.

D2 HS2 When operating in the Cylinder , Head, Sector mode, this is bit 2 of the

head number. It is Bit 26 in the Logical Block Address mode.

D1 HS1 When operating in the Cylinder , Head, Sector mode, this is bit 1 of the

head number. It is Bit 25 in the Logical Block Address mode.

D0 HS0 When operating in the Cylinder , Head, Sector mode, this is bit 0 of the

head number. It is Bit 24 in the Logical Block Address mode.

SanDisk CompactFlash Card OEM Product Manual ATA Register Set and Protocol

4.5.9 Status & Alternate Status Registers (Address–1F7[177]&3F6[376]; Offsets 7 &

Eh)

These registers return the card status when read by the host. Reading the Status Register clears

a pending interrupt while reading the Auxiliary Status Register does not. The meaning of the

status bits are described as follows:

D7 D6 D5 D4 D3 D2 D1 D0

BUSY RDY DWF DSC DRQ CORR 0 ERR

Bit Name Description

D7 BUSY Set when the CompactFlash Card has access to the command buffer and

registers and the host is locked out from accessing the command register

and buffer. No other bits in this register are valid when this bit is set to a 1.

D6 RDY RDY indicates whether the device is capable of performing card operations.

This bit is cleared at power-up and remains cleared until card is ready to

accept a command.

D5 DWF If set, indicates a write fault has occurred.

D4 DSC Set when the card is ready.

D3 DRQ Set when the card requires that information be transferred either to or from

the host through the Data Register.

D2 CORR Set when a correctable data error has been encountered and the data has

been corrected. This condition does not terminate a multi-sector read

operation.

D1 0 Always set to 0.

D0 ERR Set when the previous command has ended in some type of error. The bits

in the Error Register contain additional information describing the error.

4.5.10 Device Control Register (Address–3F6[376]; Offset Eh)

This register is used to control the CompactFlash Memory Card interrupt request and to issue

an ATA soft reset to the card. The bits are defined as follows:

D7 D6 D5 D4 D3 D2 D1 D0

X X X X 1 SW Rst -IEn 0

ATA Register Set and Protocol SanDisk CompactFlash Card OEM Product Manual

Device Control Register (con’t)

Bit Name Description

D7 X Don’t care.

D6 X Don’t care.

D5 X Don’t care.

D4 X Don’t care.

D3 1 Bit ignored by the card.

D2 SW Rst Set to 1 in order to force the card to perform an AT Disk controller Soft

Reset operation. This does not change the PCMCIA Card Configuration

registers as a hardware reset does. The card remains in Reset until this bit

is reset to “0”.

D1 -IEn Interrupt Enable bit enables interrupts when the bit is 0. When the bit is 1,

interrupts from the card are disabled. This bit also controls the Int bit in the

Configuration and Status Register. This bit is set to 0 at power on and

reset.

D0 ERR Bit ignored by the card.

4.5.11 Card (Drive) Address Register (Address–3F7[377]; Offset Fh)

This register is provided for compatibility with the AT disk drive interface. It is recommended

that this register not be mapped into the host's I/O space because of potential conflicts on Bit 7.

The bits are defined as follows:

D7 D6 D5 D4 D3 D2 D1 D0

X -WTG -HS3 -HS2 -HS1 -HS0 -nDS1 -nDS0

SanDisk CompactFlash Card OEM Product Manual ATA Register Set and Protocol

Card (Drive) Address Register (con’t)

Bit Name Description

D7 X This bit is unknown.

Implementation Note:

Conflicts may occur on the host data bus when this bit is provided by a

Floppy Disk Controller operating at the same addresses as the

CompactFlash Memory Card. Following are some possible solutions to this

problem for the PCMCIA implementation:

1. Locate the CompactFlash Memory Card at a non-conflicting address,

i.e., Secondary address (377) or in an independently decoded Address

Space when a Floppy Disk Controller is located at primary addresses.

2. Do not install a Floppy and a CompactFlash Memory Card in the system

at the same time

3. Implement a socket adapter that can be programmed to (conditionally)

tri-state D7 of I/0 address 3F7/377 when a CompactFlash Memory Card is

installed and conversely to tri-state D6-D0 of I/O address 3F7/377 when a

floppy controller is installed

4. Do not use the card's Drive Address Register . This may be accomplished

by either a) If possible, program the host adapter to enable only I/O

addresses 1F0-1F7, 3F6 (or 170-177, 176) to the card or

b) if provided use an additional primary/secondary configuration in the card

that does not respond to accesses to I/O locations 3F7 and 377. With either

of these implementations, the host software must not attempt to use

information in the Drive Address Register.

D6 -WTG This bit is 0 when a write operation is in progress, otherwise, it is 1.

D5 -HS3 This bit is the negation of bit 3 in the Drive/Head Register.

D4 -HS2 This bit is the negation of bit 2 in the Drive/Head Register.

D3 -HS1 This bit is the negation of bit 1 in the Drive/Head Register.

D2 -HS0 This bit is the negation of bit 0 in the Drive/Head Register.

D1 -nDS1 This bit is 0 when drive 1 is active and selected.

D0 -nDS0 This bit is 0 when the drive 0 is active and selected.

ATA Register Set and Protocol SanDisk CompactFlash Card OEM Product Manual

–This page intentionally left blank–

CHAPTER 5 ATA Command Description

This section defines the software requirements and the format of commands the host sends to

CompactFlash Memory cards. Commands are issued to the card by loading the required

registers in the command block with the suppl ied parameters, and then writing the command

code to the Command Register. The manner in which a command is accepted varies. There are

three classes (see Table 5-1) of command acceptance, all dependent on the host not issuing

commands unless the card is not busy. (The BUSY bit in the status and alternate status registers

is 0.)

•Upon receipt of a Class 1 command, the card sets the BUSY bit within 400 nsec.

•Upon receipt of a Class 2 command, the card sets the BUSY bit within 400 nsec, sets up the

sector buffer for a write operation, sets DRQ within 700 µsec, and clears the BUSY bit

within 400 nsec of setting DRQ.

•Upon receipt of a Class 3 command, the card sets the BUSY bit within 400 nsec, sets up the

sector buffer for a write operation, sets DRQ within 20 msec (assuming no re-assignments),

and clears the BUSY bit within 400 nsec of setting DRQ.

5.1 ATA Command Set

Table 5-1 summarizes the ATA command set with the paragraphs that follow describing the

individual commands and the task file for each.

Table 5-1 Primary and Secondary I/O Decoding

Class Command Code FR SC SN CY DH LBA

1 Check Power Mode E5h or 98h - - - - D -

1 Execute Dri ve Diagn ostic 90h - - - - D -

1 Erase Sector(s)a C0h -Y Y Y Y Y

2 Format Track 50h - Y - Y Y Y

1 Identify Device ECh - - - - D -

1 Idle E3h or 97h - Y - - D -

1 Idle Immediate E1h or 95h - - - - D -

1 Initialize Drive Parameters 91h - Y - - Y -

1 Read Buffer E4h - - - - D -

1 Read DMA C8 or C9 - Y Y Y Y Y

1 Read Multiple C4h - Y Y Y Y Y

1 Read Long Sector 22h or 23h - - Y Y Y Y

1 Read Sector(s) 20h or 21h - Y Y Y Y Y

1 Read Verify Sector(s) 40h or 41h - Y Y Y Y Y

1 Recalibrate 1Xh - - - - D -

1 Request Senseb 03h - - - - D -

1 Seek 7Xh - - Y Y Y Y

1 Set Features EFh Y - - - D -

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

Table 5-1 Primary and Secondary I/O Decoding

Class Command Code FR SC SN CY DH LBA

1 Set Multiple Mode C6h - Y - - D -

1 Set Sleep Mode E6h or 99h - - - - D -

1 St and By E2h or 96h - - - - D -

1 Stand By Immediate E0h or 94h - - - - D -

1 Translate Sectorb 87h - Y Y Y Y Y

1 Wear Levelb F5h - - - - Y -

2 Write Buffer E8h - - - - D -

2 Write DMA CA or CB - Y Y Y Y Y

2 Write Long Sector 32h or 33h - - Y Y Y Y

3 Write Multiple C5h - Y Y Y Y Y

3 Write Multiple w/o Erasea CDh -Y Y Y Y Y

2 Write Sector(s) 30h or 31h - Y Y Y Y Y

2 Write Sector(s) w/o Erasea 38h - Y Y Y Y Y

2 Write Verify 3Ch - Y Y Y Y Y

a. These commands are not standard PC Card ATA commands and these features are no longer sup-

ported with the introduction of 256 Mbit Flash Technology. If one of these commands is issued, the

sectors will be erased but there will be no net gain in write performance when using the Write Without

Erase command.

b. These commands are not standard PC Card ATA commands but provide additional functionality.

ABBREVIATION KEY

FR Features Register

SC Sector Count Register

SN Sector Number Register

CY Cylinder Registers

DH Card/Drive/Head Register

LBA Logical Block Address Mode Supported

Y The register contains a valid parameter for this command. For the Drive/Head Register , both the

CompactFlash Card and head parameters are used

D The register contains a valid parameter for this command. For the Drive/Head Register, only the

CompactFlash Card parameter is valid and not the head parameter

5.1.1 Check Power Mode–98H, E5H

This command checks the power mode.

If the CompactFlash Card is in, going to, or reco vering from the sleep mode, it sets BSY, sets

the Sector Count Register to 00h, clears BSY and generates an interru pt.

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

If the card is in Idle mode, it sets BSY, sets the Sector Count Register to FFh, clears BSY and

generates an interrupt .

Table 5-2 Check Power Mode

Bit 7 6 5 4 3 2 1 0

Command (7) E5H or 98H

C/D/H (6) X Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) X

Feature (1) X

5.1.2 Execute Drive Diagnostic–90H

This command performs the internal diagnostic tests implemented by the CompactFlash cards.

Table 5-3 Execute Drive Diagnostic

Bit 7 6 5 4 3 2 1 0

Command (7) 90H

C/D/H (6) X Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) X

Feature (1) X

The Diagnostic codes shown in Table 5-4 are returned in the Error Register at the end of the

command.

Table 5-4 Diagnostic Codes

Code Error Type

01h No error detected

02h Formatter device error

03h Sector buffer error

04h ECC circuitry error

05h Controlling microprocessor error

8Xh Slave failed (T rue IDE Mode)

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

5.1.3 Erase Sector(s)–C0H

This command is no longer recomm ended . There is essen tial ly no net g a in in th e use of the

Erase Sectors Command and/or th e Write Without Erase Commands. This command is

supported to guarantee backward compatibility.

Table 5-5 Erase Sectors

Bit 7 6 5 4 3 2 1 0

Command (7) C0H

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) Sector Number (LBA 7-0)

Sec Cnt (2) Sector Number (LBA 7-0)

Feature (1) X

5.1.4 Format Track–50H

This command writes the desired head and cylinder of the selected drive with an FFh pattern.

To remain host backward compatible, the card expects a sector buffer of data from the host to

follow the command wit h the same protoco l as the Write Sector(s) command although the

information in the buffer is not used by the card. If LBA=1 then the number of sectors to

format is taken from the Sec Cnt register (0=256).

NOTE:The Format Track command in Table 5 -6 i s no longer recommended.

The command is supported to guarantee backward compatib ility.

Table 5-6 Format Track

Bit 7 6 5 4 3 2 1 0

Command (7) 50H

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) X (LBA 7-0)

Sec Cnt (2) Count (LBA mode only)

Feature (1) X

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

5.1.5 Identify Device–ECH

The Identify Drive command enables the host to receive parameter information from a

CompactFlash Memory Card . This command has the same protocol as the Read Sector(s)

command. The parameter words in the buffer have the arrangement and meanings defined in

Table 5-8. All reserved bits or words are “0”.

Table 5-7 Identify Device

Bit 7 6 5 4 3 2 1 0

Command (7) ECH

C/D/H (6) X X X Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) X

Feature (1) X

Table 5-8 is the definition for each field in the Identify Device Information.

Table 5-8 Identify Device Information

Word

Address Default Value Total Bytes Data Field Type Information

0 848Ah 2 General configuration bit-significant

information

1 XXXXh 2 Default number of cylinders

2 0000h 2 Reserved

3 XXXXh 2 Default number of heads

4 0000h 2 Number of unformatted bytes per track

5 0000h 2 Number of unformatted bytes per sector

6 XXXXh 2 Default number of sectors per track

7-8 XXXXh 4 Number of sectors per card (Word 7 = MSW,

Word 8 = LSW)

9 0000h 2 Reserved

10-19 aaaa 20 Serial number in ASCII (right justified)

20 0000h 2 Buffer type (dual ported)

21 0000h 2 Buffer size in 512 byte increments

22 0004h 2 Number of ECC bytes passed on Read/Write

Long Commands

23-26 aaa 8 Firmware revision in ASCII (Rev M.ms) set by

code Big Endian Byte Order in Word

27-46 aaaa 40 Model number in ASCII (left justified) Big

Endian Byte Order in Word

47 000Xh 2 Maximum No. of Sectors on Read/Write Multiple

command

48 0000h 2 Double-word not supported

49 0X00ha 2 Capabilities: DMA Supported (bit 8), LBA

supported (bit 9)

50 0000h 2 Reserved

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

Table 5-8 Identify Device Information

Word

Address Default Value Total Bytes Data Field Type Information

51 0200h 2 PIO data transfer cycle timing mode

52 0000h 2 Single word DMA data transfer cycle timing

mode (not supported)

53 0003h 2 Field validity

54 XXXXh 2 Current number of cylinders

55 XXXXh 2 Current number of heads

56 XXXXh 2 Current sectors per track

57-58 XXXXh 4 Current capacity in sectors (LBAs)

(Word 57 = LSW, Word 58 = MSW)

59 010Xh 2 Multiple sector setting is valid

60-61 XXXXh 4 Total number of sectors addressable in LBA

Mode

62 0000h 2 Single word DMA transfer (not supported)

63 0X07h 2 0-7: Multiword DMA modes supported

15-8: Multiword DMA mode active

64 0003h 2 Advanced PIO modes supported

65 0078h

(IDE Mode only) 2 Minimum multiword DMA transfer cycle time

per word in ns

66 0078h

(IDE Mode only) 2 Recommended multiword DMA transfer cycle

time per word in ns

67 0078h 2 Minimum PIO transfer without flow control

68 0078h 2 Minimum PIO transfer with IORDY flow control

69-79 0000h 20 Reserved

80 00XXh 2 Major ATA version

81 0000h 2 Minor ATA version

82 00X0h 2 Features/command sets supported

83 4004h 2 Features/command sets supported

84 4000h 2 Features/command sets supported

85 0000h 2 Features/command sets enabled

86 0004h 2 Features/command sets enabled

87 4000h 2 Features/command sets enabled

88 0000h 2 Ultra DMA Mode supported and selected

89 XXXXh 2 Time required for security erase-unit

completion

90 0000h 2 T ime required for enhanced security erase-unit

completion

91 XXXXh 2 Current advanced power management value

92-127 0000h 72 Reserved

128-159 0000h 64 Reserved vendor-unique bytes

160 0000h 2 Power requirement description

161 0000h 2 Reserved for assignment by the CFA

162 0000h 2 Key management schemes supported

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

Table 5-8 Identify Device Information

Word

Address Default Value Total Bytes Data Field Type Information

163 00XXh 2 CF Advanced True IDE Timing Mode

Capability and Setting

164 001Bh 2 CF Advanced PCMCIA I/O and Memory

T iming Mode Capability

165-175 0000h 22 Reserved for assignment by the CFA

176-255 0000h 140 Reserved

a. Multiword DMA is supported by SanDisk PCMCIA. For all unsupported cases, 0100H is reported in

word 49, and 0000H is reported in words 52, 63, and 65. CompactFlash products will support multi-

word.

Word 0: General Configuration. This field informs the host that this is a non-magnetic, hard

sectored, removable storage device with a transf er rate greater than 10 Mb/sec and is not MFM

encoded. CompactFlash products report 848AH in compliance with t he CFA specification.

Word 1: Default Number of Cylinders. This field contains the number of translated

cylinders in the default translat ion mode. This value will be the same as the number of

cylinders.

Word 3: Default Number of Heads. This field contains the number of translated heads in the

default transl ation mode.

Word 4: Number of Unformatted Bytes per Track. This field contains the number of

unformatted bytes per translated t rack in th e de fault translation mode .

Word 5: Number of Unformatted Bytes per Sector. This field contains the number of

unformatted bytes per sector in the default translation mode.

Word 6: Default Number of Sectors per Track. This field contains the number of sectors

per track in the default translation m ode.

Words 7-8: Number of Sectors per Card. This field contains the number of sectors per

CompactFlash Memory Card. This double word value is also the first invalid address in LBA

translation mode.

Words 10-19: Memory Card Serial Number. The contents of this field are right j ustified

and padded with spaces (20h).

Word 20: Buffer Type. This field defines the buffer capability with the 0002h m eaning a

dual ported multi-sector buffer capable of simultaneous data transfers to or from the host and

the CompactFlash Memory Card.

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

Word 21: Buffer Size. This field defines the buffer capacity of 2 sectors or 1 kilobyte of

SRAM.

Word 22: ECC Count. This field defines the number of ECC bytes used on each sector in the

Read and W rite Long commands.

Words 23-26: Firmware Revision. This field contains the revision of the firmware for this

product.

Words 27-46: Model Number. This field contains the model number for this product and is

left justified and padded wit h spaces (20h).

Word 47: Read/Write Multiple Sector Count. This fi eld contains the maximum number of

sectors that can be read or written per interrupt using the Read Multiple or Write Multiple

commands.

Word 48: Double Word Support. This field indicates this product will no t support double

word transfers.

Word 49: Cap ab ili ties. This field indicates if this product supports DMA Data transfers and

LBA mode. All SanDisk products support LBA mode.

Word 51: PIO Data Transfer Cycle Timing Mode. To determi ne the proper device timing

category, compare the Cycle Time specified in Table 3-15 with the contents of this field wit h

Table 3-14.

t0 is the minimum total cycle time, t2 is the minimum comm a nd active time, and t2i is the

minimum command recovery time or command inactive time. The actual cycle time equals the

sum of the actual command active time and the actual command inactive time. The three

timing requirement s of t0, t2, and t2i shall be met. The minimum total cycle time requirements

are greater than the sum of t2 and t2i. This means a host implementation may lengthen either or

both t2 or t2i to ensure that t0 is equal to or greater than the value reported in the devices

IDENTIFY DEVICE data. A device implementation shall support any legal host

implementation.

The IORD-data tri-state parameter specifies the time from the negation edge of /IORD to the

time that the data bus is no longer driven by the dev ice (tri-state).

NOTE:For backward compatibi lity with BIOS' written before Word 64 was

defined for advanced modes, a device report s in Word 51 the hig hest

original PIO mode it can support (i.e., PIO mode 0, 1 or 2).

Word 52: Single Word DMA Data Transfer Cycle Timing Mode. This field states this

product does not support any Single Word DMA data transfer mode.

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

Word 53: Translation Parameters Valid. Bit 0 of this field is set, indicating that words 54 to

58 are valid and reflect the current number of cylinders, heads and sectors. Bit 1 is also set,

indicating values in words 64 throug h 70 are val id.

Words 54-56: Current Number of Cylinders, Heads, Sectors/Track. These fields contain

the current number of user addressable cylinders, heads, and sectors/track in the current

translation mode.

Words 57-58: Current Capacity . This field contains the product of the current cylinders x

heads x sectors.

Word 59: Multiple Sector Setting . This field contains a validity flag in the odd byte and the

current number of sectors that can be transferred per interrupt for R/W Multiple in the even

byte. The odd byte is always 01H, which indicates that the even byte is always valid.

The even byte value depends on the value set b y the Set Multiple command. The even byte of

this word by default contains a 00H, which indicates that R/W Multiple commands are not

valid. The only other value returned by the Com pactFlash Memory Card in the even byte is a

01H value, which indicates that 1 sector per interrupt, can be transferred in R/W Multiple

mode.

Words 60-61: Total Sectors Addressable in LBA Mode. This field contains the number of

sectors addressable for the CompactFlash Card in LBA mode only.

Word 64: Advanced PIO Transfer Modes Supported. Bits 0 and 1 of this field are set to

indicate support fo r PIO transfer modes 3 and 4, respectively.

Word 65: Minimum Multiword DMA Transfer Cycle Time per Word. Word 65 of the

parameter informat ion of the IDENTIFY DEVICE command is defined as the Minimum

Multiword DMA Transfer Cycle Time Per Word. This field defines, in nanosecond s, the

minimum cycle ti me that the device can support when performing Multiword DMA transfers

on a per word basis.

Word 66: Recommended Multiword DMA Cycle Time. Word 66 of the parameter

information of the IDENTIFY DEVICE command is defined as the Recommended Multiword

DMA Transfer Cycle Time. This field defines, in nanoseconds, the minimum cycle time per

word during a single sector host transfer while performing a multiple sector READ DMA or

WRITE DMA commands over all locations on the media under minimal conditions. If a host

runs at a faster cycle rate by operating at a cycle time of less th at this value, the device may

negate DMARQ for flow control. The rate at which DMARQ is negated could result in

reduced throughput despite the faster cycled rate. Transfer at this rate does not ensure that flow

control will not be used, but implies that hi gher pe rform a nce may result.

Word 67: Minimum PIO Transfer Cycle Time Without Flow Contr ol. This field indicates

in nanoseconds, the minimu m cycle time that, if used by the host, the card guarantees data

integrity during the cycle without utilization of flow control.

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

Word 68: Minimum PIO Transfer Cycle Time With Flow Control. This field indicates in

nanoseconds, the minimum cycle time the card supports while performing data transfers using

flow control.

Words 82-84: Features/Command Sets Supported. Words 82, 83, and 84 indicate the

features and command sets supported. The value 00 00h or FFFFh was placed in each of these

words by CompactFlash cards prior to ATA-3 and will be interpreted by the host as meaning

that features/command sets supported are not indicated. Bits 1 through 13 of Word 83, and bits

0 through 13 of Word 84 are reserved. Bit 14 of Word 83 and Word 84 will be set to "1," and

bit 15 of Word 83 and Word 84 w ill be cleared to zero which indicates that the features and

command sets supported words are valid. The values in these words should not be depended

on by host implementers.

Table 5-9 Word 82 Description

Bit Setting Indication

0 0 SMART feature set not supported

1 1 Security Mode feature set supported

2 0 Removable Media feature set not supported

3 1 Power Management feature set supported

4 0 Packet Command feature set not supported

5 1 Write cache supported

6 1 Look-ahead supported

7 0 Release Interrupt not supported

8 0 Service Interrupt not supported

9 0 Device Reset command not supported

10 0 Host Protected Area feature set not supported

11 --- Obsolete

12 1 Write Buffer command supported by CF Card

13 1 Read Buffer command supported by CF Card

14 1 NOP command supported by CF Card

15 --- Obsolete

Table 5-10 Word 83 Description

Bit Setting Indication

0 0 Download Microcode command not supported by CF Card

1 0 Read DMA Queued and Write DMA Queued commands not supported by CF

Card

2 1 CFA feature set supported by CF Card

3 1 Advanced Power Management feature set supported by CF Card

4 0 Removable Media Status feature set not supported by CF Card

Words 85-87 : Features/Command Sets Enabled. Words 85, 86, and 87 indicates features/

command sets enabled. The value 0000h or FFFFh was placed in each of these words by

CompactFlash cards prior to ATA-4 and will be interpreted by the host as meaning that

features/command sets enabled are not indicat e d. Bits 1 through 15 of word 86 are reserved.

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

Bits 0-13 of word 87 are reserved. Bit 14 of word 87 will be set to one and bit 15 of word 87

will be cleared to zero to provide indication that the features/command sets enabled words are

valid. The values in these words shoul d not be dep e nded upon by host implemen ters.

Table 5-11 Word 85 Description

Bit Setting Indication

0 0 SMART feature set not enabled

1 1 Security Mode feature set enabled via the Security Set Password command

2 0 Removable Media feature set not supported

3 1 Power Management feature set supported

4 0 Packet Command feature set not enabled

5 1 Write cache enabled

6 1 Look-ahead enabled

7 0 Release Interrupt not enabled

8 0 Service Interrupt not enabled

9 0 Device Reset command not supported

10 0 Host Protected Area feature set not supported

11 --- Obsolete

12 1 Write Buffer command supported by CF Card

13 1 Read Buffer command supported by CF Card

14 1 NOP command supported by CF Card

15 --- Obsolete

Table 5-12 Word 86 Description

Bit Setting Indication

0 0 Download Microcode command not supported by CF Card

1 0 Read DMA Queued and Write DMA Queued commands not supported by CF

Card

2 1 CFA feature set supported by CF Card

3 1 Advanced Power Management feature set by Set Features command

4 0 Removable Media Status feature set not supported by CF Card

Word 163: CF Advanced True IDE Timing Mode Capabilities and Settings. This word

describes the capabilities and current settings fo r CFA defined advanced tim ing modes using

the True IDE interface.

There are four separate fields defined that describe support and selection of Advanced PIO

timing modes and Advanced Multiword DMA timing modes. The older modes are reported in

Word 63: Multiword DMA Transfer and and Word 64: Advanced PIO Transfer Modes

Supported.

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

• Bits 2-0: Advanced True IDE PIO Mode Support

Indicates the maximum True IDE PIO mode supported by the card.

Value Maximum PIO Mode Timing Supported

0 Specified in Word 64

1 PIO Mode 5

2 PIO Mode 6

3-7 Reserved

• Bits 5-3: Advanced True IDE Multiword DMA Mode Support

Indicates the maximum True IDE Multiword DMA mode supported by the card.

Value Maximum Multiword DMA Mode Timing Supported

0 Specified in Word 63

1 Multiword DMA Mode 3

2 Multiword DMA Mode 4

3-7 Reserved

• Bits 8-6: Advanced True IDE PIO Mode Selected

Indicates the current Tr ue IDE PIO mode selected on the card.

Value Current PIO Timing Mode Selected

0 Specified in Word 64

1 PIO Mode 5

2 PIO Mode 6

3-7 Reserved

• Bits 11-9: Ad van ced True IDE Multiword DMA Mode Selected

Indicates the current Tr ue IDE Multiword DMA Mode Selected on the card.

Value Current Multiword DMA Timing Mode Selected

0 Specified in Word 63

1 Multiword DMA Mode 3

2 Multiword DMA Mode 4

3-7 Reserved

• Bits 15-12: Reserved

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

Word 164: CF Advanced PCMCIA I/O and Memory Timing Mode Capabilities and Set-

tings. This word describes the capabilities and current settings for CFA defined advanced

timing modes using the Memory and PCMCIA I/O interface.

• Bits 2-0: Maximum Advanced PCMCIA I/O Mode Support

Indicates the maximum I/O timing m ode supported by the card.

Value Maximum PCMCIA I/O Timing Mode Supported

0 255 ns Cycle PCMCIA I/O Mode

1 120 ns Cycle PCMCIA I/O Mode

2 100 ns Cycle PCMCIA I/O Mode

3 80 ns Cycle PCMCIA I/O Mode

4-7 Reserved

• Bits 5-3: Maximum Memory Timing Mode Supported

Indicates the Maximum Memory timing mode supported by the card.

Value Maximum Memory Timing Mode Supported

0 250 ns Cycle Memory Mode

1 120 ns Cycle Memory Mode

2 100 ns Cycle Memory Mode

3 80 ns Cycle Memory Mode

4-7 Reserved

• Bits 15-6: Reserved

5.1.6 Idle–97H, E3H

This command causes the card to set BSY, enter the Idle (Read) mode, clear BSY and generate

an interrupt. If the sector count is non-zero, it is interpreted as a timer count with each count

being 5 milliseconds and the autom a tic po wer down mode is enabled. If the sector count is

zero, the automatic power down mo de is disabled.

NOTE: This time base (5 msec) is different from the ATA specification.

Table 5-13 Idle

Bit 7 6 5 4 3 2 1 0

Command (7) E3H or 97H

C/D/H (6) X Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) Timer Count (5 ms increments)

Feature (1) X

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

5.1.7 Idle Immediate–95H, E1H

This command causes the card to set BSY, enter the Idle (Read) mode, clear BSY and generate

an interrupt.

Table 5-14 Idle Immediate

Bit 7 6 5 4 3 2 1 0

Command (7) E1H or 95H

C/D/H (6) X Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) X

Feature (1) X

5.1.8 Initialize Drive Parameters–91H

This command enables the host to set the number of sectors per track and the number of heads

per cylinder. Only the Sector Count and the Card/Drive/Head registers are used by this

command.

NOTE:SanDisk recommends not using this command in any system because

DOS determines the offset to the Boot Record based on the number

of heads and sectors per track. If a CompactFlash Memory Card is

"Formatted" with one head and sector per track value, the same card

will not operate correctly with DOS configured with another heads

and sectors per track value.

Table 5-15 Initialize Drive Parameters

Bit 7 6 5 4 3 2 1 0

Command (7) 91H

C/D/H (6) X 0 X Drive Max. Head (no. of heads - 1)

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) Number of Sectors

Feature (1) X

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

5.1.9 Read Buffer–E4H

The Read Buffer command enables the host to read the current contents of the card's sector

buffer. This command has the same protocol as the Read Sector(s) command.

Table 5-16 Read Buffer

Bit 7 6 5 4 3 2 1 0

Command (7) E4H

C/D/H (6) X Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) X

Feature (1) X

5.1.10 Read DMA Command–C8H, C9H

The Read DMA command in Table 5-17 executes in a similar man ner to t he READ

SECTOR(S) command except for the following:

•The host initializes the DMA channel prior to issuing the com mand.

•Data transfers are qualified by DMARQ and are performed by the DMA channel.

•The device issues only one interrupt per command to indicate that data transfer has termi-

nated and status is available.

During the DMA transfer phase of a Read DMA command, the device provides status of the

BSY bit or the DRQ bit until the comm and is com pleted.

Table 5-17 Read DMA Command

Bit 7 6 5 4 3 2 1 0

Command (7) C8H or C9H

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) Sector Number (LBA 7-0)

Sec Cnt (2) Sector Count

Feature (1) X

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

5.1.11 Read Multiple–C4H

The Read Multiple command performs similarly to the Read Sectors command. Interrupts are

not generated on every sector, but on the transfer of a block, which cont ains the nu mber of

sectors defined by a Set Multiple, command.

Table 5-18 Read Multiple

Bit 7 6 5 4 3 2 1 0

Command (7) C4H

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) Sector Number (LBA 7-0)

Sec Cnt (2) Sector Count

Feature (1) X

Command execution is identical to the Read Sectors operation except that the number of

sectors defined by a Set Multiple command is transferred without intervening interrupts. DRQ

qualification of the transfer is required only at the start of the data block, not on each sector.

The block count of sectors to be transferred without intervening int errupts is programmed by

the Set Multiple Mode command, which m ust be executed prio r to the Read Multiple

command. When the Read Multiple command is issued, the Sector Count Register contains the

number of sectors (not the number of blocks or the block count) requested. If the number of

requested sectors is not evenly divisible by the block count, as many full blocks as possible are

transferred, followed by a final, partial block transfer. The partial block transfer is for n

sectors, where: n = (sector count)-module (block count).

If the Read Multiple command is att empted before the Set Multiple Mode comm and has been

executed or when Read Multiple commands are disabled, the Read Multiple operation is

rejected with an Aborted Command error. Disk errors encountered during Read Multiple

commands are posted at the beginning of th e block or partial block transfer, but DRQ is still

set and the data transfer will take place as it normally would, includin g transfer of corrupted

data, if any.

Interrupts are generated when DRQ is set at the beginning of each block or partial block. The

error reporting is the same as that on a Read Sector(s) Command. This command reads from 1

to 256 sectors as specified in the Sector Count register. A sector count of 0 requests 256

sectors. The transfer begins at the sector specified in the Sector Number Register.

At command completion, the Command Block registers contain the cylinder, head and sector

number of the last sector read.

If an error occurs, the read terminates at the sector where the error occurred. The Command

Block registers contain the cylinder, head and sector number of the sector where the error

occurred. The flawed data is pending in the sector buffer.

Subsequent blocks or partial blocks are transferred only if the error was a correctable data

error. All other errors cause the command to stop after transfer of the block that contained the

error.

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

5.1.12 Read Long Sector–22H, 23H

The Read Long command performs similarly to the Read Sector(s) command except that it

returns 516 bytes of data instead of 512 bytes. During a Read Lo ng com man d, the card does

not check the ECC bytes to determine if there has been a data error. Only single sector read

long operations are support ed. The transfer consists of 512 bytes of data transferred in word

mode followed by 4 bytes of random data transferred in byte mode. Random data is returned

instead of ECC bytes because of the nature of the ECC system used. This command has the

same protocol as the Read Sector(s) command.

Table 5-19 Read Long Sector

Bit 7 6 5 4 3 2 1 0

Command (7) 22H or 23H

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) Sector Number (LBA 7-0)

Sec Cnt (2) X

Feature (1) X

5.1.13 Read Sector(s)–20H, 21H

This command reads from 1 to 256 sectors as specified in the Sector Count Register. A sector

count of 0 requests 256 sectors. The transfer begins at the sector specified in the Sector

Number Register. When this command is issued and after each sector of data (except the last

one) has been read by the host, the CompactFlash card sets BSY, puts the sector of data in the

buffer, sets DRQ, clears BSY, and generates an interrupt. The host then reads the 512 bytes of

data from the buffer.

At command completion, the Command Block registers contain the cylinder, head and sector

number of the last sector read. If an error occurs, the read terminates at the sector where the

error occurred. The Command Block registers contain the cylinder , head, and sector number of

the sector where the error occurred. The flawed data is pending in the sector buffer.

Table 5-20 Read Sector(s)

Bit 7 6 5 4 3 2 1 0

Command (7) 20H or 21H

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) Sector Number (LBA 7-0)

Sec Cnt (2) Sector Count

Feature (1) X

5.1.14 Read Verify Sector(s)–40H, 41H

This command is identical to the Read Sectors command, except that DRQ is never set and no

data is transferred to the host. When the command is accepted, the card sets BSY.

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

When the requested sectors have been verified, the card clears BSY and generates an interrupt.

Upon command completion, the Command Block registers contain the cylinder, head, and

sector number of the last sector verified.

If an error occurs, the verify terminates at the sector where the error occurs. The Command

Block registers contain the cylinder, head and sector number of the sector where the error

occurred. The Sector Count Register contains the number of sectors not yet verified.

Table 5-21 Read Verify Sector(s)

Bit 7 6 5 4 3 2 1 0

Command (7) 40H or 41H

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) Sector Number (LBA 7-0)

Sec Cnt (2) Sector Count

Feature (1) X

5.1.15 Recalibrate–1XH

This command is effectively a NOP command to the CompactFlash Memory Card and is

provided for compatibil ity purposes. After this command is executed the Cyl High and Cyl

Low as well as the Head number will be 0 and Sec Num will be 1 if LBA=0 and 0 if LBA=1

(i.e., the first block in LBA is 0 while CHS mode the sector number starts at 1).

Table 5-22 Recalibrate

Bit 7 6 5 4 3 2 1 0

Command (7) 1XH

C/D/H (6) 1 LBA 1 Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) X

Feature (1) X

5.1.16 Request Sense–03H

This command requests an extended error code after a command ends with an error.

Table 5-23 Request Sense

Bit 7 6 5 4 3 2 1 0

Command (7) 03H

C/D/H (6) 1 X 1 Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) X

Feature (1) X

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

Ta ble 5-24 defines the valid extended error codes for the CompactFlash Memor y Card Series

product. The extended error code is returned to the host in the Error Register. This command

must be the next command issued to the card following the command that returned an error.

Table 5-24 Extended Error Codes

Extended Error Code Description

00h No error detected

01h Self test OK (no error)

09h Miscellaneous error

20h Invalid command

21h Invalid address (requested head or sector invalid)

2Fh Address overflow (address too large)

35h, 36h Supply or generated voltage out of tolerance

11h Uncorrectable ECC error

18h Corrected ECC error

05h, 30-34h, 37h, 3Eh Self test or diagnostic failed

10h, 14h ID not found

3Ah Spare sectors exhausted

1Fh Data transfer error/aborted command

0Ch, 38h, 3Bh, 3Ch, 3Fh Corrupted media format

03h Write/erase failed

5.1.17 Seek–7XH

This command is effectively a NOP command to the card although it does perform a range

check of cylinder and head or LBA address and returns an error if the address is out of range.

Table 5-25 Seek

Bit 7 6 5 4 3 2 1 0

Command (7) 7XH

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) Sector Number (LBA 7-0)

Sec Cnt (2) X

Feature (1) X

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

5.1.18 Set Features–EFH

This command is used by the host to establish or select certain features.

Table 5-26 Set Features

Bit 7 6 5 4 3 2 1 0

Command (7) EFH

C/D/H (6) X Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) Config

Feature (1) Feature

Table 5-27 defines all features that are supported. The 9AH feature is unique to CompactFlash

Memory cards and are not part of the ATA Specification.

Table 5-27 Features Supported

Feature Operation

01h Enable 8-bit data transfer

02h Enable Write Cache

03h Set Transfer Mode based on value and Sector Count register.

55h Disable Read Look Ahead

66h Disable Power on Reset (POR) establishment of defaults at Soft Reset

69h Accepted for backward compatibility with the SDP Series but has no

impact on the CF Memory Card.

81h Disable 8-bit data transfer

96h Accepted for backward compatibility with the SDP Series but has no

impact on the CF Memory Card

9Ah Accepted for backward compatibility with the SDP Series but has no

impact on the CF Memory Card

BBh 4 bytes of data apply on Read/Write Long commands

CCh Enable Power on Reset (POR) establishment of defaults at Soft Reset.

Features 01H and 81H are used to enable and clear 8-bit data transfer mode. If the 01H feature

command is issued, all data transfers will occur on the low order D7-D0 data bus and the

IOIS16 signal will not be asserted for data register accesses.

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

A host can choose the transfer mechanism by Set Transfer Mode and specifying a value in the

Sector Count register. The upper 5 bits define the type of transfer and the low order 3 bits

encode the mode value.

Mode Value

PIO Default Transfer Mode 00000 00d

PIO Flow Control Transfer Mode x 00001 nnn

Multiword DMA Mode x 00100 nnn

Reserved 01000 nnn

Reserved 10000 nnn

Where “nnn” is a valid mode number in binary; “x” is the mode number in decimal for

the associated transfer type; and “d” is ignored.

Features 55H and BBH are the default features for CompactFlash cards; thus, the host does not

have to issue this command with these features unless it is necessary for compatibility reasons.

The 9AH Feature is accepted for backward compatibility with the SDP Series but has no

impact on the card. SanDisk does not recommend the use of this command in new designs.

Features 66H and CCH can be used to enable and disable whether the Power On Reset (POR)

Defaults will be set when a soft reset occurs. The default set ting is to revert to the POR

defaults when a soft reset occurs. POR defaults the number of heads and sectors along with 16

bit data transfers and the read/write multiple blo ck count.

5.1.19 Set Multiple Mode–C6H

This command enables the card to perform Read and W rite Multiple operations and establishes

the block count for these commands. The Sector Count Register is loaded with the number of

sectors per block. The current version of the card supports only a block size of 1 sector per

block. Future versions may support larger block sizes. Upon receipt of the command, the card

sets BSY to 1 and checks the Sector Count Register.

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

If the Sector Count Register contains a valid value and the block count is supported, the value

is loaded for all subsequent Read Multiple and Wr ite Mul tiple commands and execution of

those commands is enabled. If a block count is not supported, an Aborted Comm a nd error is

posted, and Read Multiple and Write Multiple commands are disabled. If the Sector Count

disabled. At power on, or after a hardware or (unl ess disabled by a Set Feature command)

software reset, the default mode is Read and Write Multiple disabled.

Table 5-28 Set Multiple Mode

Bit 7 6 5 4 3 2 1 0

Command (7) C6H

C/D/H (6) X Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) Sector Count

Feature (1) X

5.1.20 Set Sleep Mode–99H, E6H

This command causes the card to set BSY, enter the Sleep mode, clear BSY and generate an

interrupt. Recovery from sleep mode is accomplished by simply issuing another command (a

reset is permitted but not required). Sleep mode is also entered when internal timers expire so

the host does not need to issue this command except when it wishes to enter Sleep mode

immediately. The default value for the read to sleep timer is 5 milliseconds. This time base (5

msec) is different from the ATA Specification.

Table 5-29 Set Multiple Mode

Bit 7 6 5 4 3 2 1 0

Command (7) 99H o r E6H

C/D/H (6) X Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) X

Feature (1) X

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

5.1.21 Standby–96H, E2H

This command causes the card to set BSY, enter the Sleep mode (which corresponds to the

ATA "Standby" Mode), clear BSY and return the interrupt immediately. Recovery from sleep

mode is accomplished by simply issuing another command (reset is not required).

Table 5-30 Standby

Bit 7 6 5 4 3 2 1 0

Command (7) E2H or 96H

C/D/H (6) X Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) X

Feature (1) X

5.1.22 Standby Immediate–94H, E0H

This command causes the card to set BSY, enter the Sleep mode (which corresponds to the

ATA "Standby" Mode), clear BSY and return the interrupt immediately. Recovery from sleep

mode is accomplished by simply issuing another command (reset is not required).

Table 5-31 Standby Immediate

Bit 7 6 5 4 3 2 1 0

Command (7) E0H or 94H

C/D/H (6) X Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) X

Feature (1) X

5.1.23 Translate Sector–87H

When this command is issued, the controller responds with a 512-byte buffer of information

on the desired cylinder, head and sector with the actual Logical Address.

Table 5-32 Translate Sector

Bit 7 6 5 4 3 2 1 0

Command (7) 87H

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) Sector Number (LBA 7-0)

Sec Cnt (2) X

Feature (1) X

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

Table 5-33 represents the information in the buffer. This command is unique to SanDisk

CompactFlash Memory cards.

Table 5-33 Translate Sector Information

Address Information

00 Head

01-02 Cylinder

03 Sector

04-07 LBA

08 Chip

09-0A Block

0B Page

0C-1FF Reserved

5.1.24 Wear Level–F5H

This command is effectively a NOP command and only impleme nted for backward

compatibility with earlier SanDisk SDP series products. The Sector Count Register will

always be returned with an 00H indicating Wear Level is not needed.

Table 5-34 Wear Level

Bit 7 6 5 4 3 2 1 0

Command (7) F5H

C/D/H (6) X X X Drive Flag

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) Completion Status

Feature (1) X

5.1.25 Write Buffer–E8H

The Write Buffer command enables the host to overwrite contents of the card's sector buffer

with any data pattern desired. This command has the same protocol as the Write Sector(s)

command and transfers 512 bytes.

Table 5-35 Write Buffer

Bit 7 6 5 4 3 2 1 0

Command (7) E8H

C/D/H (6) X Drive X

Cyl High (5) X

Cyl Low (4) X

Sec Num (3) X

Sec Cnt (2) X

Feature (1) X

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

5.1.26 Write DMA Command–CAH, CBH

The W rite DMA command in Table 5 33 executes in a similar manner to WRITE SECT OR(S)

except for the following:

•The host initialised the DMA channel p rio r to issuing the command.

•Data transfers are qualified by DMARQ and are performed by the DMA channel.

•The device issues only one interrupt per command to indicate that data transfer has termi-

nated and status is available.

During the execution o f a Write DMA command, the device provides status of the BSY bit or

the DRQ bit until the command is completed.

Table 5-36 Write DMA Command

Bit 7 6 5 4 3 2 1 0

Command (7) CAH or CBH

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) Sector Number (LBA 7-0)

Sec Cnt (2) Sector Count

Feature (1) X

5.1.27 Write Long Sector–32H, 33H

This command is provided for compatibility purposes and is similar to the W rite Sector(s)

command except that it writes 516 bytes instead of 512 bytes. Only single sector Write Long

operations are supported. The transfer consists of 512 bytes of data transferred in word mode

followed by 4 bytes of ECC transferred in byte mode. Because of the unique nature of the

solid-state CompactFlash Memory Card, the four bytes of ECC transferred by the host cannot

be used by it. The card discards these four bytes and writes the sector with valid ECC fields.

This command has the same protoco l as the Write Sector(s ) command.

Table 5-37 Write Long Sector

Bit 7 6 5 4 3 2 1 0

Command (7) 32H or 33H

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) Sector Number (LBA 7-0)

Sec Cnt (2) X

Feature (1) X

5.1.28 Write Multiple Command–C5H

This command is simi lar to the W rite Sectors command. The card sets BSY within 400 nsec of

accepting the command. Interrupts are not presented on each sector but on the transfer of a

block that contains the number of sectors defined by Set Multiple. Command execution is

identical to the Write Sectors operation except that the number of sectors defined by the Set

Multiple command is transferred without intervening interrupts.

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

DRQ qualification of the transfer is required only at the start of the data block, not on each

sector. The block count of sectors to be transferred without intervening interrupts is

programmed by the Set Multiple Mode com mand, which must be executed prior to the Write

Multiple command.

Table 5-38 Write Multiple Command

Bit 7 6 5 4 3 2 1 0

Command (7) C5H

C/D/H (6) X LBA X Drive Head

Cyl High (5) Cylinder High

Cyl Low (4) Cylinder Low

Sec Num (3) Sector Number

Sec Cnt (2) Sector Count

Feature (1) X

When the Write Multiple command is issued, the Sector Count Register contains the number

of sectors (not the number of blocks or the block count) requested. If the number of requested

sectors is not evenly divisible by the sector/block, as many full blocks as possible are

transferred, followed by a final, partial block transfer. The partial block transfer is for n

sectors, where: n = remainder (sector count/block count).

If the W rite Multiple command is attempted before the Set Multiple Mode command has been

executed or when Write Multiple commands are disabled, the Write Multiple operation will be

rejected with an aborted command error.

Errors encountered during Write Mul tiple commands are posted after the attempted writes of

the block or partial block transferred. The W rite command ends with the sector in error, even if

it is in the middle of a block. Subsequent blocks are not transferred in the event of an error.

Interrupts are generated when DRQ is set at the beginning of each block or partial block.

The Command Block registers contain the cylinder, head and sector number of the sector

where the error occurred and the Sector Count Register contains the residual number of sectors

that need to be transferred for successful completion of the command e.g., each block has 4

sectors, a request for 8 sectors is issued and an error occurs on the third sector. The Sector

Count Register contains 6 and the address is that of the third sector.

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

5.1.29 Write Multiple without Erase–CDH

SanDisk does not recommend the use of this command in new designs but it is suppo rted as a

normal Write Sectors command for backward compatibility reasons.

Table 5-39 Write Multiple w/out Erase

Bit 7 6 5 4 3 2 1 0

Command (7) CDH

C/D/H (6) X LBA X Drive Head

Cyl High (5) Cylinder High

Cyl Low (4) Cylinder Low

Sec Num (3) Sector Number

Sec Cnt (2) Sector Count

Feature (1) X

5.1.30 Write Sector(s)–3 0H, 31H

This command writes from 1 to 256 sectors as specified in the Sector Count Register . A sector

count of zero requests 256 sectors. The transfer begins at the sector specified in the Sector

Number Register. When this command is accepted, the card sets BSY, then sets DRQ and

clears BSY, then waits for the host to fill the sector buffer with the data to be written. No

interrupt is generated to start the first buffer fill operation. No data should be transferred by the

host until BSY has been cleared by the host.

For multiple sectors, after the first sector of data is in the buf fer , BSY will be set and DRQ will

be cleared. After the next buffer is ready for data, BSY is cleared, DRQ is set and an interrupt

is generated. When the final sector of data is transferred, BSY is set and DRQ is cleared. It will

remain in this state until the command is completed at which time BSY is cleared and an

interrupt is generated.

If an error occurs during a write of more than one sector, writing terminates at the sector where

the error occurs. The Command Block registers contain the cylinder, head and sector number

of the sector where the error occurred. The host may then read the command block to

determine what error has occurred, and on which sector.

Table 5-40 Write Sector(s)

Bit 7 6 5 4 3 2 1 0

Command (7) 30H or 31H

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) Sector Number (LBA 7-0)

Sec Cnt (2) Sector Count

Feature (1) X

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

5.1.31 Write Sector(s) without Erase–38H

SanDisk does not recommend the use of this command in new designs but it is suppo rt ed as a

normal Write Sectors command for backward compatibility reasons.

Table 5-41 Write Sector(s) w/out Erase

Bit 7 6 5 4 3 2 1 0

Command (7) 38H

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) Sector Number (LBA 7-0)

Sec Cnt (2) Sector Count

Feature (1) X

5.1.32 Write Verify Sector(s)–3CH

This command writes from 1 to 256 sectors as specified in the Sector Count Register . A sector

count of zero requests 256 sectors. The transfer begins at the sector specified in the Sector

Number Register. When this command is accepted, the card sets BSY, then sets DRQ and

clears BSY, then waits for the host to fill the sector buffer with the data to be written. No

interrupt is generated to start the first buffer fill operation. No data should be transferred by the

host until BSY has been cleared by the host.

For multiple sectors, after the first sector of data is in the buf fer , BSY will be set and DRQ will

be cleared. After the next buffer is ready for data, BSY is cleared, DRQ is set and an interrupt

is generated. When the final sector of data is transferred, BSY is set and DRQ is cleared. It will

remain in this state until the command is completed at which time BSY is cleared and an

interrupt is generated.

Table 5-42 Write Verify Sector(s)

Bit 7 6 5 4 3 2 1 0

Command (7) 3CH

C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)

Cyl High (5) Cylinder High (LBA 23-16)

Cyl Low (4) Cylinder Low (LBA 15-8)

Sec Num (3) Sector Number (LBA 7-0)

Sec Cnt (2) Sector Count

Feature (1) X

If an error occurs during a write of more than one sector, writing terminates at the sector where

the error occurs. The Command Block registers contain the cylinder, head and sector number

of the sector where the error occurred. The host may then read the command block to

determine what error has occurred, and on which sector.

SanDisk CompactFlash Card OEM Product Manual ATA Command Description

5.2 Error Posting

Table 5-43 summarizes the valid status and error value for all the ATA command set.

Table 5-43 Error and Status Registera

Error Register Status Register

Command BBK UNC IDNF ABRT AMNF DRDY DWF DSC CORR ERR

Check Power Mode - - - V - V V V - V

Execute Drive Diagnostic - - - - - V - V - V

Erase Sector(s) V - V V V V V V - V

Format Track - - V V V V V V - V

Identify Device - - - V - V V V - V

Idle - - - V - V V V - V

Idle Immediate - - - V - V V V - V

Initialize Drive Parameters - - - - - V - V - V

Read Buffer - - - V - V V V - V

Read DMAb V V V V V V V V V V

Read Multiple V V V V V V V V V V

Read Long Sector V -V V V V V V V - V

Read Sector(s) V V V V V V V V V V

Read Verify Sectors V V V V V V V V V V

Recalibrate - - - V - V V V - V

Request Sense - - - V - V - V - V

Seek - - V V - V V V - V

Set Features - - - V - V V V - V

Set Multiple Mode - - - V - V V V - V

Set Sleep Mode - - - V - V V V - V

Standby - - - V - V V V - V

Standby Immediate - - - V - V V V - V

Translate Sector V - V V V V V V - V

Wear Level V V V V V V V V - V

Write Buffer - - - V - V V V - V

Write DMA V - V V - V V - - V

Write Long Sector V - V V V V V V - V

Write Multiple V - V V V V V V - V

Write Multiple w/o Erase V - V V V V V V - V

Write Secto r (s) V - V V V V V V - V

Write Sector(s) w/o Erase V - V V V V V V - V

Write Verify Sector(s) V - V V V V V V - V

Invalid Command Code - - - V - V V V - V

a. V = Valid on this command.

b. CompactFlash products support multiword DMA.

ATA Command Description SanDisk CompactFlash Card OEM Product Manual

–This page intentionally left blank–

CHAPTER 6 CIS Description

This section describes the Card Inform ation Structure (CIS) for SanDisk CompactFlash

Memory cards.

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

000h 01h CISTPL_DEVICE Device Info Tuple Tuple Code

002h 04h Link is 4 bytes Link to

next tuple

004h DFh Dev ID Type

Dh = I/O

Speed

7h = Ext

I/O Device, Wa it State,

Extended Speed Device ID,

WPS, Speed

006h 12h X Speed Mantissa = 2h Speed Exponent = 2h 120 ns if no wait Extended

Speed

79h

Extreme III

X Speed Mantissa = Fh Speed Exponent = 1h 80 ns if no wait Extended

Speed

008h 01h # Address Unit – 1 = 1x Side Code = 2k units (One) 2 kB of Address

Space Device Size

00Ah FFh List End Marker End of Devices End Marker

00Ch 1Ch CISTPL_DEVICE_OC Other Conditions

Info Tuple Tuple Code

00Eh 04h Link is 4 Bytes Link to Next

Tuple

010h 03h Reserved = 0 VCC W

Conditions: 3V operation

is allowed and WAIT

is used

3 V Operation,

Wait Function

012h D9h Dev ID Type

Dh = I/O W

1 Speed = 1h I/O Device, WPS,

Speed = 250 ns Device ID,

WPS, Speed

014h 01h # Address Unit – 1 = 1x Side Code = 2k units 2 kB of Address Space Device Size

016h FFh List End Marker End of Devices End Marker

018h 18h CISTPL_JEDEC_C JEDEC ID

Common Memory Tuple Code

01Ah 02h Link is 2 bytes Link Length

01Ch DFh PCMCIA JEDEC Manufacturer’s ID First byte of JEDEC ID

for SanDisk PC Card

ATA 12V

Byte 1,

JEDEC ID of

Device 1

(0-2K)

01Eh 01h PCMCIA Code for PC Card-ATA No Vpp Required Second Byte of

JEDEC ID Byte 2,

JEDEC ID

020h 20h CISTPL_MANFID Manufacturer ’s ID Tuple Tuple Code

022h 04h Link is 4 bytes Link Length

024h 45h Low Byte of PCMCIA Manufacturer’s Code SanDisk JEDEC

Manufacturer ’s ID Low Byte of

PCMCIA

Mfg ID

CIS Description SanDisk CompactFlash Card OEM Product Manual

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

026h 00h High Byte of PCMCIA Manufacturer’s Code Code of 0 because other High Byte of

byte is JEDEC 1 byte PCMCIA

Manufacturer’s ID Mfg ID

028h 01h Low Byte of Product Code SanDisk Code for

SDP Series Low By te

Product Code

02Ah 04h High Byte of Product Code SanDisk Code for

PC Card ATA High Byte

Product Code

02Ch 15h CISTPL_VER_1 Level 1 V ersion/Product

Info Tuple Code

02Eh 17h Link to next tuple is

23 bytes Link Length

030h 04h TPPLV1_MAJOR PCMCIA 2.0/JEIDA 4.1 Major Version

032h 01h TPPLV1_MINOR PCMCIA 2.0/JEIDA 4.1 Minor Version

034h 53h ASCII Manufacturer String ‘S’ String 1

036h 61h ‘a’a

038h 6Eh ‘n’

03Ah 44h ‘D’

03Ch 69h ‘i’

03Eh 73h ‘s’

040h 6Bh ‘k’

042h 00h End of Manufacturer String Null Terminator

044h 53h ASCII Product Name String ‘S’ Info String 2

046h 44h ‘D’

048h 50h ‘P’

04Ah 00h End of Product Name String Null Terminator

04Ch 35h ‘5’ Info String 3

04Eh 2Fh ‘/’

050h 33h ‘3’

052h 20h ‘ ‘

054h 30h SanDisk Card CIS Revision Number ‘0’

056h 2Eh ‘.’

058h 36h ‘6’

05Ah 00h End of CIS Revision Number Null Terminator

05Ch FFh End of List Marker FFh List Terminator No Info

String 4

05Eh 80h CISTPL_VEND_SPECIF_80 SanDisk Parameters

Tuple Tuple Code

060h 03h (Field Bytes 3-4 taken as 0) Link Length is 3 Bytes Link to Next

Tuple and

Length of Info

in this Tuple

SanDisk CompactFlash Card OEM Product Manual CIS Description

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

062h 14h W 12 NI PP P R I A R I R SP No Wear Level & NO SanDisk

D Vpp Fields, 1 to 4

N W: No Wear Level Bytes limited

0 0 1 1

0 1 0 0 12: Vpp not used on

Write

by link length

NI: -INPACK connected

PP: Programmable

Power

PDNA: Pwr Down Not

Abort--Cmd

RIA: RBsy, ATBsy con-

nected

RIR: RBsy Inhibited at

Reset

SP: No Security Present

This definition applies

only to cards with

Manufacturer's ID tuple

1st 3 bytes 45 00 01.

064h 08h R R R R E TPR TAR R8 R8: 8 bit ROM present SanDisk

0 0 0 0 1 0 0 0 TAR: Temp Bsy on AT

Reset

Fields, 1 to 4

bytes limited

TPR: Temp Bsy on by link length

PCMCIA – Reset

E: Erase Ahead Avail-

able

R: Reserved, 0 for now

This definition applies

only to cards with

Manufacturer's ID tuple

1st 3 bytes 45 00 01.

066h 00h For specific

platform

use only

068h 21h CISTPL_FUNCID Function ID Tuple Tuple Code

06Ah 02h Link Length is 2 Bytes Link to

Next Tuple

06Ch 04h Function Type Code Disk Function Function

Code

06Eh 01h R

Attempt installation

at POST:

P: Install at POST

R: Reserved (0)

070h 22h CISTPL_FUNCE Function

Extension Tuple Tuple Code

072h 02h Link Length is 2 Bytes Link to

Next Tuple

CIS Description SanDisk CompactFlash Card OEM Product Manual

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

074h 01h Disk Function Extension Tuple Type Extension T uple Extension

describes the Interface Tuple Type

Protocol for Disk

076h 01h Interface Type Code PC Card–ATA Interface Extension Info

078h 22h CISTPL_FUNCE Function Extension tuple Tuple Code

07Ah 03h Tuple has 3 Info Bytes Link Length

07Ch 02h Disk Function Extension Tuple Type Basic PCMCIA-ATA Extension

Extension Tuple Tuple Type

for Disk

07Eh 0Ch R

Unique Manufacturer/

Serial Number com-

bined string:

Basic ATA

Option

Parameters

V = 0: No Vpp Required

V = 1: Vpp on Modified

Media

V = 2: Vpp on Any

Operation

V = 3: Vpp Continuous

S: Silicon, else Rotating

Drive

U: ID Drive Mfg/SN

Unique

080h 0Fh R

All power-down modes

and power commands

are not needed to

Extended

A T A Option

Parameters

minimize power.

P0: Sleep Mode

Supported

P1: Standby Mode

Supported

P2: Idle Mode

Supported

P3: Drive Auto Power

Control

N: Some Config

Excludes 3X7

E: Index Bit is Emulated

I: Twin–-IOis16 Data

Reg Only

082h 1Ah CISTPL_CONF Configuration Tuple Tuple Code

084h 05h Link Length is 5 Bytes Link to

Next Tuple

SanDisk CompactFlash Card OEM Product Manual CIS Description

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

086h 01h RFS RMS RAS Size of Reserved Field Size of

00 00 01 is 0 Bytes

Size of Register Mask

is 1 Byte

Fields Byte

(TPCC_SZ)

Size of Config Base

Address is 2 Bytes

RFS: Bytes in

Reserved Field

RMS: Bytes in

Reg Mask–1

RAS: Bytes in

Base Addr–1

088h 07h TPCC_LAST Entry with Config Index

07h is final entry in table Last Entry of

Config. Table

08Ah 00h TPCC_RADR (LSB) Configuration Registers

located at 200h

in Reg. Space

Location of

Config.

Registers

08Ch 02h TPCC_RADR (MSB)

08Eh 0Fh R

First (4) Configuration

Registers are present: TPCC_RMSK

I: Configuration Index

C: Configuration and

Status

P: Pin Replacement

S: Socket and Copy

R: Rese rved for

future use

090h 1Bh CISTPL_CE Configuration

Entry Tuple Tuple Code

092h 0Bh Link to Next Tuple is 11 Link to

Bytes. Also limits size of Next Tuple

this tuple to 13 bytes.

094h C0h I

Configuration Index

0 Memory Mapped

I/O Configuration TPCE_INDX

Configuration Index for

this entry is 0. Interface

Byte follows this byte.

Default Configuration,

so is not dependent on

previous Default

Configuration.

D: Default Configuration

I: Interface Byte follows

CIS Description SanDisk CompactFlash Card OEM Product Manual

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

096h C0h W

Interface Type Memory Only

Interface(0), Bvd's and

wProt not used,

TPCE_IF

Ready/-Busy and Wait

for memory cycles

active.

B: Battery Volt

Detects Used

P: Write Protect Used

R: Ready/-Busy Used

W: Wait Used for

Memory Cycles

098h A1h M MS IR IO T P VCC only Power; TPCE_FS

1 1 0 0 0 1 No Timing, I/O, or IRQ;

2 Byte Memory

Space Length;

Misc Entry Present.

P: Power Info type

T: Timin Info present

IO :I/O Port Info present

IR: Interrupt Info present

MS: Mem Space Info

type

M: Misc Info Byte(s)

present

09Ah 27h R DI PI AI SI HV LV NV Nominal Voltage follows: Power

0 0 1 0 0 1 1 1 NV: Nominal Voltage

LV: Mimimum Voltage

Parameters

for VCC

HB: Maximum Voltage

SI: Static Current

AI: Average Current

PI: Peak Current

DI: Power Down Current

09Ch 55h X

Mantissa

Ah = 5.0

Exponent

5h = 1V

VCC Nominal is 5 V VCC Nominal

Value

09Eh 4Dh X

Mantissa

9h = 4.5

Exponent

5h = 1V

VCC Nominal is 4.5 V VCC Mi n.

Value

0A0h 5Dh X

Mantissa

Bh = 5.5

Exponent

5h = 1V

VCC Nominal is 5.5 V VCC Max.

Value

0A2h 75h X Mantissa Exponent Max. Average Current Max. Average

0 Eh = 8.0 5h = 10 over 10 ms is 80 mA Current

0A4h 08h Length in 256 Bytes Pages (LSB) Length of Memory

Space is 2 kB TPCE_MS

Length LSB

0A6h 00h Length in 256 Bytes Pages (MSB) Start at 0 on card TPCE_MS

Length MSB

SanDisk CompactFlash Card OEM Product Manual CIS Description

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

0A8h 21h X

Power-Down and

Twin Card. TPCE_MI

T: Twin Cards Allowed

A: Audio Supported

RO: Read Only Mode

P: Power Down

Supported

R: Reserved

X: More Miscellaneous

Fields Bytes

0AAh 1Bh CISTPL_CE Configu ration Entry

Tuple Tuple Code

0ACh 06h Link to Next Tuple is 6 Link to

Bytes. Also limits size of Next Tuple

this tuple to 8 bytes.

0AEh 00h I D Configuration Index Memory Mapped I/O TPCE_INDX

0 0 0 3.3V Configuration.

0B0h 01h M MS IR IO T P P: Power Info type TPCE_FS

0 0 0 0 0 1

0B2h 21h R DI PI AI SI H LV NV PI: Peak Current TPCE_PD

0 0 1 0 0 0 0 1 NV: Nominal Operation

Supply Voltage

0B4h B5h X

Mantissa

6h = 3.0

Exponent

5h = 10

Nominal Operation

Supply Voltage = 3.0V Nominal

Operation

Supply

Voltage

0B6h 1Eh X 1Eh +.30 Nominal

0 Operation

Supply

Voltage

Extension

Byte

0B8h 4Dh X

Mantissa

9h = 4.5

Exponent

5h = 10

Max. Average Current

over 10 ms is 45 mA Max. Average

Current

0BAh 1Bh CISTPL_CE Configuration

Entry Tuple Tuple Code

0BCh 0Dh Link to Next Tuple is 13 Link to

Bytes. Also limits size of Next Tuple

this tuple to 15 bytes.

CIS Description SanDisk CompactFlash Card OEM Product Manual

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

0BEh C1h I

Configuration Index

I/O Mapped Contiguous

16 Registers

Configuration.

TPCE_INDX

Configuration Index for

this entry is 1. Interface

Byte follows this byte.

Default Configuration,

therefore is not

dependent on previous

Default Configuration.

D: Default Configuration

I: Interface Byte follows

0C0h 41h W

Interface Type

I/O Interface(1), Bvd's

and wProt not used;

Ready/-Busy active but

Wait not used for

TPCE_IF

memory cycles.

B: Battery Volt

Detects Used

P: Write Protect Used

R: Ready/-Busy Used

W: Wait Used for

Memory Cycles

0C2h 99h M MS IR IO T P VCC Only Power TPCE_FS

1 0 1 1 0 1 De scriptors; No Timing;

I/O and IRQ present; No

Memory Space; Misc

Entry Present

P: Power Info type

T: Timing Info present

IO :I/O Port Info present

IR: Interrupt Info present

MS: Memory Space Info

type

M: Misc Info Byte(s)

present

0C4h 27h R DI PI AI SI HV LV NV Nominal Voltage Follows Power

0 0 1 0 0 1 1 1 NV: Nominal Voltage

LV: Mimimum Voltage

Parameters

for VCC

HB: Maximum Voltage

SI: Static Current

AI: Average Current

PI: Peak Current

DI: Power Down Current

0C6h 55h X Mantissa Exponent VCC Nominal is 5V VCC Nominal

0 Ah = 5.0 5h = 1V Value

SanDisk CompactFlash Card OEM Product Manual CIS Description

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

0C8h 4Dh X Mantissa Exponent VCC Nominal is 4.5V VCC Mi n.

0 9h = 4.5 5h = 1V Value

0CAh 5Dh X Mantissa Exponent VCC Nominal is 5.5V VCC Max.

0 Bh = 5.5 5h = 1V Value

0CCh 75h X Mantissa Exponent Max. Average Current Max. Average

0 Eh = 8.0 5h = 10 over 10 ms is 80 mA Current

0CEh 64h R

IO AddeLines

Supports both 8 and 16

bit I/O hosts. 4 Address

lines & no range so 16

registers and host must

do all of the selection

TPCE_IO

decoding.

IO AddrLines:#lines

decoded.

E: 8-bit Only Hosts

Supported

S: 16-bit Hosts

Supported

R: Range follows

0D0h F0h S

IRQ Sharing Logic

Active in Card

Control & Status

TPCE_IR

Level Mode Interrupts

supported,

Recommended IRQ's

any of 0 through 15(F)

S: Share Logic Active

P: Pulse Mode IRQ

Supported

L: Level Mode IRQ

Supported

M: Bit Mask of IRQs

Present

V: Vendor Unique IRQ

B: Bus Error IRQ

I: IO Check IRQ

N: Non-Maskable IRQ

0D2h FFh 7

IRQ Levels to be routed

0 - 15 recommended. TPCE_IR

Mask

Extension

Byte 1

0D4h FFh F

Recommended routing

to any "normal,

maskable" IRQ.

TPCE_IR

Mask

Extension

Byte 2

CIS Description SanDisk CompactFlash Card OEM Product Manual

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

0D6h 21h X

Power-Down

and Twin Card. TPCE_MI

T: Twin Cards Allowed

A: Audio Supported

RO: Read Only Mode

P: Power Down

Supported

R: Reserved

X: More Misc Fiel d s

Bytes

0D8h 1Bh CISTPL_CE Configuration

Entry Tuple Tuple Code

0DAh 06h Link to Next Tuple is 6 Link to

Bytes. Also limits size of Next Tuple

this tuple to 8 bytes.

0DCh 01h I

Configuration Index

I/O Mapped Contiguous

3.3V Configuration

TPCE_INDX

0DEh 01h M MS IR IO T P P: Power I nfo type TPCE_FS

0 0 0 0 0 1

0E0h 21h R

PI: Peak Current

NV: Nominal Operation

Supply Voltage

Power

Parameters

for VCC

0E2h B5h X Mantissa Exponent Nominal Operation Nominal

1 6h = 3.0 5h = 1 Supply Voltage = 3.0V Operation

Supply

Voltage

0E4h 1Eh X 1Eh +.30 Nominal

0 Operation

Supply

Voltage

Extension

Byte

0E6h 4Dh X

Mantissa

9h = 4.5

Exponent

5h = 10

Max. Average Current

over 10 ms is 45 mA Max. Average

Current

0E8h 1Bh CISTPL_CE Configuration

Entry Tuple Tuple Code

0EAh 12h Link to Next Tuple is 18 Link to

Bytes. Also limits size of Next Tuple

this tuple to 20 bytes

0ECh C2h I

Configuration Index

A T Fixed Disk Primary

I/O Address

Configuration

TPCE_INDX

Configuration Index for

this entry is 2. Interface

Byte follows this byte.

Default Configuration

SanDisk CompactFlash Card OEM Product Manual CIS Description

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

0EEh 41h W

Interface Type

I/O Interface(1), Bvd's

and wProt not used;

Ready/-Busy active but

Wait not used for

TPCE_IF

memory cycles.

B: Battery Volt Detects

Used

P: Write Protect Used

R: Ready/-Busy Used

W: Wait Used for

Memory Cycles

0F0h 99h M MS IR IO T P VCC Only Power TPCE_FS

1 0 1 1 0 1 Description; No Timing;

I/O and IRQ present; No

Memory Space; Misc

Entry present.

P: Power Info type

T: Timing Info present

IO: I/O Port Info present

IR: Interrupt Info present

MS: Memory Space Info

type

M: Misc Info Byte(s)

present

0F2h 27h R DI PI AI SI HV LV NV Nominal Voltage follows: Power

0 0 1 0 0 1 1 1 NV: Nominal Voltage

LV: Mimimum Voltage

Parameters

for VCC

HB: Maximum Voltage

SI: Static Current

AI: Average Current

PI: Peak Current

DI: Power Down Current

0F4h 55h X Mantissa Exponent VCC Nominal is 5V VCC Nominal

0 Ah = 5.0 5h = 1V Value

0F6h 4Dh X Mantissa Exponent VCC Nom inal is 4.5V VCC Min.

0 9h = 4.5 5h = 1V Value

0F8h 5Dh X Mantissa Exponent VCC Nom inal is 5.5V VCC Max.

0 Bh = 5.5 5h = 1V Value

0FAh 75h X Mantissa Exponent Max. Average Current Max. Average

0 9h = 4.5 5h = 10 over 10 ms is 80 mA Current

CIS Description SanDisk CompactFlash Card OEM Product Manual

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

0FCH EAh R

IO AddeLines

Ah = 10

Supports both 8- and

16-bit I/O hosts. 10

Address Lines with

TPCE_IO

range so card will

respond only to

indicated (1F0-1F7,

3F6-3F7) on A9 through

A0 for I/O cycles. IO

AddrLines:#lines

decoded

E: 8-bit Only Hosts

Supported

S: 16-bit Hosts

Supported

R: Range follows

0FEh 61h LS

N Ranges - 1

Number of Ranges is 2;

Size of each address is

2 bytes; size of each

length is 1 byte.

I/O Range

Format

Description

AS: Size of Addresses

0: No Address Present

1: 1Byte (8 bit)

Addresses

2: 2Byte (16 bit)

Addresses

3: 4Byte (32 bit)

Addresses

LS: Size of length

0: No Lengths Present

1: 1Byte (8 bit) Lengths

2: 2Byte (16 bit)

Lengths

3: 4Byte (32 bit)

Lengths

100h F0h 1st I/O Base Address (lsb) First I/O Range Base

is 1F0h

102h 01h 1st I/O Base Address (msb)

104h 07h 1st I/O Range Length - 1 8 Bytes Total ==>

1F0-1F7h I/O Length–1

106h F6h 2nd I/O Base Address (lsb) 2nd I/O Range Base

is 3F6h

108h 03h 2nd I/O Base Address (msb)

10Ah 01h 2nd I/O Range Length - 1 2 Bytes Total ==>

3F6-3F7h I/O Length–1

SanDisk CompactFlash Card OEM Product Manual CIS Description

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

10Ch EEh S

Recommend IRQ Level

Eh = 14

IRQ Sharing Logic

Active in Card

Control & Status

TPCE_IR

Level Mode Interrupts

supported,

Recommended IRQ's

any of 0 through 15(F)

S: Share Logic Active

P: Pulse Mode IRQ

Supported

L: Level Mode IRQ

Supported

M: Bit Mask of IRQs

Present

M=0 so bits 3-0 are

single level, binary

encoded

10Eh 21h X

Power-Down

and Twin Card. TPCE_MI

T: Twin Cards Allowed

A: Audio Supported

RO: Read Only Mode

P: Power Down

Supported

R: Reserved

X: More Misc Fields

Bytes

1 10h 1Bh CISTPL_CE Configuration

Entry Tuple Tuple Code

112h 06h Link to Next Tuple is 6 Link to

Bytes. Also limits size of Next Tuple

this tuple to 8 bytes.

114h 02h I D Configuration Index A T Fixed Disk Primary TPCE_INDX

0 0 2 I/O 3.3V Configuration

116h 01h M MS IR IO T P P: Power Info type TPC E _FS

0 0 0 0 0 1

118h 21h R

PI: Peak Current

NV: Nominal Operation

Supply Voltage

Power

Parameters

for VCC

11AH B5h X Mantissa Exponent Nominal Operation Nominal

1 6h = 3.0 5h = 1 Supply Voltage = 3.0V Operation

Supply

Voltage

CIS Description SanDisk CompactFlash Card OEM Product Manual

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

11Ch 1Eh X 1Eh +.30 Nominal

0 Operation

Supply

Voltage

Extension

Byte

11Eh 4Dh X Mantissa Exponent Max. Average Current Max. Average

0 9h = 4.5 5h = 10 over 10 ms is 45 mA Current

120h 1Bh CISTPL_CE Configuration

Entry Tuple Tuple Code

122h 12h Link to Next Tuple is 18 Link to

Bytes. Also limits size of Next Tuple

this tuple to 20 bytes.

124h C3h I

Configuration Index

AT Fixed Disk

Secondary I/O

Address Configuration

TPCE_INDX

Configuration Index for

this entry is 3. Interface

Byte follows this byte.

Default Configuration

126h 41h W

Interface Type

I/O Interface(1), Bvd's

and wProt not used;

Ready/-Busy active but

Wait not used for

TPCE_IF

memory cycles.

B: Battery Volt Detects

Used

P: Write Protect Used

R: Ready/-Busy Used

W: Wait Used for

Memory Cycles

128h 99h M MS IR IO T P VCC-Only Power TPCE_FS

1 0 1 1 0 1 De scriptors; No Timing;

I/O and IRQ present; No

Memory Space; Misc

Entry Present.

P: Power Info type

T: Timing Info present

IO: I/O Port Info present

IR: Interrupt Info present

MS: Memory Space Info

type

M: Misc Info Byte(s)

present

SanDisk CompactFlash Card OEM Product Manual CIS Description

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

12Ah 27h R DI PI AI SI HV LV NV Nominal Voltage Follows Power

0 0 1 0 0 1 1 1 NV: Nominal Voltage

LV: Mimimum Voltage

Parameters

for VCC

HB: Maximum Voltage

SI: Static Current

AI: Average Current

PI: Peak Current

DI: Power Down Current

12Ch 55h X Mantissa Exponent VCC Nominal is 5V VCC Nominal

0 Ah = 5.0 5h = 1V Value

12Eh 4Dh X Mantissa Exponent VCC Nominal is 4.5V VCC Min.

0 9h = 4.5 5h = 1V Value

130h 5Dh X Mantissa Exponent VCC Nominal is 5.5V V CC Max .

0 Bh = 5.5 5h = 1V Value

132h 75h X

Mantissa

Eh = 1.0

Exponent

5h = 10

Max. Average Current

over 10 ms is 80 mA Max. Average

Current

134h EAh R

IO AddeLines

Ah = 10

Supports both 8- and

16-bit I/O hosts. 10

Address Lines with

TPCE_IO

Range so card will

respond only to

indicated (170-177, 376-

377) on A9 through A0

for I/O cycles . IO

AddrLines:#lines

decoded

E: 8-bit Only Hosts

Supported

S: 16-bit Hosts

Supported

R: Range follows

CIS Description SanDisk CompactFlash Card OEM Product Manual

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

136h 61h LS

N Ranges–1

Number of Ranges is 2;

Size of each address is

2 bytes; size of each

length is 1 byte.

I/O Range

Format

Description

AS: Size of Addresses

0: No Address Present

1: 1Byte (8 bit)

Addresses

2: 2Byte (16 bit)

Addresses

3: 4Byte (32 bit)

Addresses

LS: Size of length

0: No Lengths Present

1: 1Byte (8 bit) Lengths

2: 2Byte (16 bit)

Lengths

3: 4Byte (32 bit)

Lengths

138h 70h 1st I/O Base Address (LSB) First I/O Range Base

is 170h

13Ah 01h 1st I/O Base Address (MSB)

13Ch 07h 1st I/O Range Length–1 8 Bytes Total ==>

170-177h I/O Length–1

13Eh 76h 2nd I/O Base Address (LSB) Second I/O Range

Base is 376h

140h 03h 2nd I/O Base Address (MSB)

142h 01h 2nd I/O Range Length–1 2 Bytes T otal ==>

376-377h I/O Length–1

144h EEh S

Recommend IRQ Level

Eh = 14

IRQ Sharing Logic

Active in Card Control &

Status Register, Pulse

and Level Mode

TPCE_IR

Interrupts supported,

Recommended IRQ's

any of 0 through 15(F).

S: Share Logic Active

P: Pulse Mode IRQ

Supported

L: Level Mode IRQ

Supported

M: Bit Mask of IRQs

Present

M=0 therefore bits 3-0

are single level, binary

encoded

SanDisk CompactFlash Card OEM Product Manual CIS Description

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

146h 21h X

Power-Down,

and Twin Card. TPCE_MI

T: Twin Cards Allowed

A: Audio Supported

RO: Read Only Mode

P: Power Down

Supported

R: Reserved

X: More Misc Fields

Bytes

148h 1Bh CISTPL_CE Configuration

Entry Tuple Tuple Code

14Ah 06h Link to Next Tuple is 6 Link to

Bytes. Also limits size of Next Tuple

this tuple to 8 bytes.

14Ch 03h I D Configuration Index AT Fixed Disk TPCE_INDX

0 0 3 Secondary I/O

3.3V Configuration

14Eh 01h M MS IR IO T P P: Power Info type TPCE_FS

0 0 0 0 0 1

150h 21h R

PI: Peak Current

NV: Nominal Operation

Supply Voltage

Power

Parameters

for VCC

152h B5h X Mantissa Exponent Nominal Operation Nominal

1 6h = 3.0 5h = 1 Supply Voltage = 3.0V Operation

Supply

Voltage

154h 1Eh X 1Eh 0.3 Nominal

0 Operation

Supply

Voltage

Extension

Byte

156h 4Dh X Mantissa Exponent Max. Average Current Max. Average

0 9h = 4.5 5h = 10 over 10 ms is 45 mA Current

158H 1Bh CISTPL_CE Configuration

Entry Tuple Tuple Code

15Ah 04h Link to Next Tuple Link to

is 4 bytes Next Tuple

15Ch 07h I D Configuration Index AT Fixed Disk TPCE_INDX

0 0 7 Secondary I/O

3.3V Configuration

15Eh 00h M MS IR IO T P P: Power Info type TPCE_FS

0 0 0 0 0 0

160h 028h SanDisk Code Reserved

162h 0D3h SanDisk Code Reserved

CIS Description SanDisk CompactFlash Card OEM Product Manual

Table 6-1 Card Information Structure

Attribute

Offset Data 7 6 5 4 3 2 1 0 Content Description CIS

Function

164h 014h CISTPL_NO_LINK Prevent scan of

common memory Tuple Code

166h 000h No Bytes following Link Length is 0 Bytes Link to

Next Tuple

168h 0FFh End of Tuple Chain End of CIS Tuple Code

a. Legacy CompactFlash products may report "SunDisk" as the ASCII manufacture string.

Appendix A Ordering Information

A.1 SanDisk CompactFlash Memory Card1

To order SanDisk prod ucts directly from SanDisk, call (408) 801-1000 .

Part Number Capacity

Capacity

(formatt ed in

bytes) Sectors/Card

(Max. LBA+1) No. of

Heads

No. of

Sectors/

Track No. of

Cylinders

SDCFJ-128-388 128 MB 128,450,560 250,880 8 32 980

SDCFJ-256-388 256 MB 256,901,120 501,760 16 32 980

SDCFJ-512-388 512 MB 512,483,328 1,000,944 16 63 993

SDCFJ-1024-388 1024 MB 1,024,966,656 2,001,888 16 63 1,986

SDCFJ-2048-388 2048 MB 2,048,901,120 4,001,760 16 63 3,970

SDCFJ-4096-388 4096 MB 4,110,188,544 8,027,712 16 63 7,964

SDCFH-1024-388 1024 MB 1,024,966,656 2,001,888 16 63 1,986

SDCFH-2048-388 2048 MB 2,048,901,120 4,001,760 16 63 3,970

SDCFH-4096-388 4096 MB 4,110,188,544 8,027,712 16 63 7,964

SDCFH-8192-388 8192 MB 8,195,604,480 16,007,040 16 63 15,880

SDCFH-16384-388 16384 MB 16,391,208,960 32,014,080 16 63 31,760

SDCFX3-2048-388 2048 MB 2,048,901,120 4,001,760 16 63 3,970

SDCFX3-4096-388 4096 MB 4,110,188,544 8,027,712 16 63 7,964

SDCFX3-8192-388 8192 MB 8,195,604,480 16,007,040 16 63 15,880

SDCFX3-12288-388 12288 MB 12,293,406.720 24,010,560 16 63 23,820

SDCFX3-16384-388 16384 MB 16,391,208,960 32,014,080 16 63 31,760

1. 1 megabyte (MB) = 1 million bytes; 1 gigabyte (GB) = 1 billion bytes. Some of the listed capacity is used for formatting

and other functions, and thus is not available for data storage.

Ordering Information SanDisk CompactFlash Card OEM Product Manual

–This page intentionally left blank–

Appendix B Limited Warranty

I. WARRANTY STATEMENT

SanDisk warrants its products to be free of any defects in materials or workmanship that would

prevent them from functioning properly for one year from the date of purchase. This express

warranty is extended by SanDisk Corporation.

II. GENERAL PROVISIONS

This warranty sets forth the full extent of SanDisk's responsibilities regarding the SanDisk SD

Card. In satisfaction of its obligations hereunder , SanDisk, at its sole option, will repair , replace

or refund the purchase price of the product.

NOTWITHSTANDING ANYTHING ELSE IN THIS LIMITED WARRANTY OR

OTHERWISE, THE EXPRESS WARRANTIES AND OBLIGATIONS OF SELLER AS SET

FORTH IN THIS LIMITED WARRANTY, ARE IN LIEU OF, AND BUYER EXPRESSLY

WAIVES ALL OTHER OBLIGATIONS, GUARANTIES AND WARRANTIES OF ANY

KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY

IMPLIED WARRANT Y OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE OR INFRINGEMENT, TOGETHER WITH ANY LIABILITY OF SELLER

UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR

EQUITABLE THEORY FOR LOSS OF USE, REVENUE, OR PROFIT OR OTHER

INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT

LIMITATION PHYSICAL INJURY OR DEATH, PROPERTY DAMAGE, LOST DATA, OR

COSTS OF PROCUREMENT OF SUBSTITUTE GOODS, TECHNOLOGY OR SERVICES.

IN NO EVENT SHALL THE SELLER BE LIABLE FOR DAMAGES IN EXCESS OF THE

PURCHASE PRICE OF THE PRODUCT, ARISING OUT OF THE USE OR INABILITY TO

USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.

SanDisk's products are not warranted to operate without failure. Accordingly, in any use of

products in life support systems or other applications where failure could cause injury or loss of

life, the products should only be incorporated in systems designed with appropriate

redundancy, fault tolerant or back-up features.

III. WHAT THIS WARRANTY COVERS

For products found to be defective within one year of purchase, SanDisk will have the option of

repairing or replacing the defective product, if the following conditions are met:

A. A warranty registration card for each defective product was submitted and is on file at

SanDisk. If not, a warranty registration card must accompany each returned defective product.

This card is included in each product's original retail package.

B. The defective product is returned to SanDisk for failure analysis as soon as possible after the

failure occurs.

C. An incident card filled out by the user, explaining the conditions of usage and the nature of

the failure, accompanies each returned defective product.

D. No evidence is found of abuse or operation of products not in accordance with the published

specifications, or of exceeding storage or maximum ratings or operating conditions.

Limited Warranty SanDisk CompactFlash Card OEM Product Manual

All failing products retu rned to SanDisk under the provisions of this limited warranty shall be

tested to the product's functional an d performance specifications. Upon co nfirmation of

failure, each product will be analyzed, by whatever means necessary, to determine the root

cause of failure. If the root cause of failure is found to be not covered by the above provisions,

then the product will be returned to the customer with a report indicating why the failure was

not covered under the warranty.

This warranty does not cover defects, malfunctions, performance failures or damages to th e

unit resulting from use in other than its normal and customary manner, misuse, accident or

neglect; or improper alterations or repairs.

SanDisk reserves the right to repair or replace, at its discretion, any product returned by its

customers, even if such product is not covered under warranty , but is under no obligation to do

so.

SanDisk may, at its discretion, ship repaired or rebuilt products identi fied i n the same way as

new products, provided such cards meet or exceed the same published specifications as new

products. Concurrently, San Disk also reserves the rig ht to market any products, whether new,

repaired, or rebuilt, under different specifications and product designations if such products do

not meet the original product's specifications.

IV. RECEIVING WARRANTY SERVICE

According to SanDisk's warran ty procedure, defective product should be returned only with

prior authorization from SanDisk Corporation. Please contact SanDisk's OEM Support

Department at 866-436 -6073 with the following i nformation: product m odel number and

description, serial numbers, nature of defect, conditions of use, proof of purchase and purchase

date. If approved, SanDisk will issue a Return Material Authorization or Product Repair

Authorization n um ber and provide a shipping address where the defective product can be

returned.

V. STATE LAW RIGHTS

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMIT ATION OF INCIDENTAL

OR CONSEQUENTIAL DAM AGES, OR LIMITATION ON HOW LONG AN IMPLIED

WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT

APPLY TO YOU. This warranty gives you specific rights and you may also have other rights

that vary from state to state.

Appendix C Disclaimer of Liability

C.1 SanDisk Corporation Policy

SanDisk Corporation general policy does not recommend the use of its products in life support

applications wherein a failure or malfunction of the product may directly threaten life or injury .

Accordingly, in any use of products in life support system s or oth er applications where failure

could cause damage, injury or loss of life, the products should only be incorporated in systems

designed with appropriate redundancy, fault tolerant or back-up features.

SanDisk shall not be liable for any loss, injury or damage caused by use of the Products in any

of the following applications:

•Special applications such as military related equipment, nuclear reactor control, and aero-

space

•Control devices for automot ive vehi cles , train, ship and traffic equipment

•Safety system for disaster prevention and crime prevention

•Medical-related equipment including medical measurement device

Disclaimer of Liability SanDisk CompactFlash Card OEM Product Manual

–This page intentionally left blank–