Web page Tools & software Sample & buy Support & FAQ Document 536-1 Shielded Power Inductors - LPS5010 * Very low DCR; excellent current handling * 5.0 x 5.0 mm footprint; less than 1.0 mm tall Designer's Kit C407 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 70 - 75 mg Ambient temperature -40C to +85C with (40C rise) Irms current. Maximum part temperature +125C (ambient + temp rise). Derating. Storage temperature Component: -40C to +125C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7 reel; 3000/13 reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.02 mm pocket depth Recommended pick and place nozzle OD: 5 mm; ID: 2.5 mm PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Isat (A)5Irms (A)6 DCR SRF Inductance2 max3 typ4 10% 20% 30% 20C 40C Part number1 20% (H) (Ohms) (MHz) drop drop drop rise rise LPS5010-471MR_ LPS5010-821MR_ LPS5010-152MR_ LPS5010-222MR_ LPS5010-332MR_ LPS5010-472MR_ LPS5010-562MR_ LPS5010-682MR_ LPS5010-103MR_ LPS5010-153MR_ 0.47 0.82 1.5 2.2 3.3 4.7 5.6 6.8 10 15 0.038 0.058 0.072 0.100 0.125 290 195 168 144 105 3.1 2.3 1.7 1.4 1.1 3.3 2.5 1.8 1.5 1.2 3.4 2.6 1.9 1.6 1.3 2.0 1.2 0.90 0.88 0.86 2.7 1.5 1.4 1.2 1.1 0.175 0.240 0.255 0.350 0.500 76 75 71 51 39 0.95 0.90 0.82 0.66 0.55 1.1 0.97 0.90 0.72 0.59 1.1 1.00 0.93 0.74 0.62 0.85 0.75 0.74 0.73 0.68 0.98 0.92 0.85 0.80 0.75 0.670 1.05 1.45 2.00 3.10 32 26 20 15 12 0.47 0.38 0.31 0.26 0.21 0.51 0.42 0.34 0.29 0.23 0.53 0.43 0.36 0.30 0.24 0.46 0.40 0.33 0.25 0.21 0.62 0.55 0.44 0.35 0.28 11 9.0 7.0 5.5 4.5 0.20 0.18 0.15 0.12 0.090 0.22 0.20 0.16 0.13 0.11 0.23 0.21 0.17 0.14 0.11 0.19 0.17 0.15 0.13 0.11 0.25 0.23 0.20 0.185 0.150 LPS5010-223MR_ LPS5010-333MR_ LPS5010-473MR_ LPS5010-683MR_ LPS5010-104MR_ 22 33 47 68 100 LPS5010-124MR_ LPS5010-154MR_ LPS5010-224MR_ LPS5010-334MR_ LPS5010-474MR_ 120 150 220 330 470 3.50 4.25 6.25 8.60 12.7 LPS5010-564MR_ LPS5010-684MR_ 560 680 15.7 20.0 4.0 0.090 0.10 0.10 3.7 0.090 0.097 0.10 0.10 0.135 0.090 0.125 1. Please specify termination and packaging codes: LPS5010-684MRC Termination: R = RoHS compliant matte tin over nickel over silver. Special order, added cost: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF 10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current at 25C that causes the specified inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 536-1 Revised 09/02/15 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 536-2 Shielded SMT Power Inductors - LPS5010 Series Typical L vs Current Typical L vs Frequency 10000 10000 1000 H 100 100 H 10 10 H 1 0.1 0.1 Current (A) 1 10 0.189 0.003* 4,80 0,076 XXX X 0.82 H 0.1 0.01 1 0.1 10 Frequency (MHz) Packaging 1000/7 reel; 3000/13 reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.02 mm pocket depth NOTE NEW PART ORIENTATION Parts are rotated 90 in the packaging tape compared to previous versions of this product. 0.189 0.003* 4,80 0,076 Winding direction NEW 0.217 5,51 123 123 0.134 3,40 0.0665 1,689 0.039 typ 1,00 are of the case not including * Dimensions the termination. For maximum overall 123 Recommended Land Pattern 0.0354 0.004 * 0,90 0,10 0.039 typ 1,00 OLD 123 Internal code 123 0.060 1,52 10 H 10 123 Dash number 100 H 100 1 0.82 H 0.01 1000 H 1000 Inductance (H) Inductance (H) 1000 dimensions including the termination, add 0.005 in / 0,13 mm. For optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch / 0,13 mm). 0.134 3,40 0.134 3,40 0.060 1,52 0.134 3,40 0.217 5,51 Dimensions are in inches mm US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 536-2 Revised 09/02/15 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: LPS5015-102MLC LPS5010-105MLC LPS5010-334MLB LPS5010-152MLC LPS5010-472MLC LPS5010-821MLB LPS5010-104MLB LPS5010-222MLB LPS5010-473MLB LPS5010-472MLB LPS5010-334MLC LPS5010-564MLC LPS5010-332MLB LPS5010-332MLC LPS5010-224MLB LPS5010-684MLB LPS5010-684MLC LPS5010-471MLB LPS5010-104MLC LPS5010-154MLC LPS5010-154MLB LPS5010-683MLC LPS5010-103MLB LPS5010-333MLB LPS5010-223MLB LPS5010-562MLC LPS5010-564MLB LPS5010-105MLB LPS5010-471MLC LPS5010-103MLC LPS5010-124MLC LPS5010-682MLC LPS5010-474MLB LPS5010-223MLC LPS5010-333MLC LPS5010-474MLC LPS5010-562MLB LPS5010-153MLB LPS5010-124MLB LPS5010-821MLC LPS5010-152MLB LPS5010-224MLC LPS5010-222MLC LPS5010-682MLB LPS5010-683MLB LPS5010-473MLC LPS5010-153MLC LPS5015-102MLB LPS5010-471MRC LPS5015-102MRB LPS5010-821MRC LPS5010-471MRB LPS5010-821MRB LPS5010-332MRC LPS5010-104MRB LPS5010-474MRC LPS5010-103MRC LPS5010-682MRC LPS5010-683MRB LPS5010224MRB LPS5010-332MRB LPS5010-333MRB LPS5010-333MRC LPS5010-124MRC LPS5010-152MRB LPS5010-152MRC LPS5010-154MRB LPS5010-222MRB LPS5010-223MRB LPS5010-684MRB LPS5010-474MRB LPS5010-222MRC LPS5010-103MRB LPS5010-104MRC LPS5010-124MRB LPS5010-223MRC LPS5010154MRC LPS5010-224MRC LPS5010-472MRB LPS5010-562MRB LPS5010-153MRB LPS5010-564MRC LPS5010-684MRC LPS5010-334MRC LPS5010-683MRC LPS5010-682MRB LPS5010-334MRB LPS5010-153MRC LPS5010-473MRC LPS5010-472MRC LPS5010-473MRB LPS5010-562MRC LPS5010-564MRB