PLASTIC SILICON OPTOLOGIC(R) PHOTOSENSOR QSE156 QSE157 QSE158 QSE159 PACKAGE DIMENSIONS 0.175 (4.44) 0.100 (2.54) O 0.065 (1.65) 0.200 (5.08) O 0.095 (2.41) 0.100 (2.54) 0.500 (12.7) MIN Part Number Definitions 0.020 (0.51) SQ. 3X 0.025 (0.64) 0.075 (1.90) 2X GND VOUT QSE156 QSE157 QSE158 QSE159 Color Code Totem-Pole, buffer output Red Totem-Pole, inverter output Yellow Open-collector, buffer output Green Open-collector, inverter output Blue VCC Input/Output Table Part Number 0.100 (2.54) REF. QSE156 NOTES: 1. Dimensions for all drawings are in inches (mm). 2. Tolerance of .010 (.25) on all non-nominal dimensions unless otherwise specified. QSE157 QSE158 QSE159 Light Output On Off On Off On Off On Off High Low Low High High Low Low High DESCRIPTION The QSE15X family are OPTOLOGIC(R) ICs which feature a Schmitt trigger at output which provides hysteresis for noise immunity and pulse shaping. The basic building block of this IC consists of a photodiode, a linear amplifier, voltage regulator, Schmitt trigger and four output options. The TTL/LSTTL compatible output can drive up to ten TTL loads over supply currents from 4.5 to 16.0 volts. The devices are marked with a color stripe for easy identification. FEATURES * * * * * * * * Bipolar silicon IC Package type: Sidelooker Medium wide reception angle, 50 Package material and color: black epoxy Matched emitter: QEE113/QEE123 Daylight filter High sensitivity Direct TTL/LSTTL interface (c) 2004 Fairchild Semiconductor Corporation Page 1 of 7 8/4/04 PLASTIC SILICON OPTOLOGIC(R) PHOTOSENSOR QSE156 QSE157 QSE158 QSE159 VOLTAGE REGULATOR VCC (3) QSE156 LA VOUT (4) Totem-Pole Output Buffer GND (5) VOLTAGE REGULATOR VCC (3) QSE157 LA VOUT (4) Totem-Pole Output inverter GND (5) VCC (3) VOLTAGE REGULATOR VOUT (4) LA QSE158 Open-Collector Output Buffer GND (5) VCC (3) VOLTAGE REGULATOR VOUT (4) LA QSE159 Open-Collector Output Inverter GND (5) (c) 2004 Fairchild Semiconductor Corporation Page 2 of 7 8/4/04 PLASTIC SILICON OPTOLOGIC(R) PHOTOSENSOR QSE156 QSE157 QSE158 QSE159 ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise specified) Parameter Operating Temperature Storage Temperature Soldering Temperature (Iron)(2,3,4) Soldering Temperature (Flow)(2,3) Output Current Supply Voltage Output Voltage Power Dissipation(1) Symbol Rating Unit TOPR TSTG TSOL-I TSOL-F IO VCC VO PD -40 to +85 -40 to +100 240 for 5 sec 260 for 10 sec 50 4.0 to 16 30 100 C C C C mA V V mW NOTES: 1. Derate power dissipation linearly 2.50 mW/C above 25C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Soldering iron 1/16" (1.6 mm) minimum from housing. 5. = 880 nm (AlGaAs). ELECTRICAL / OPTICAL CHARACTERISTICS (TA = -40C to +85C, VCC = 4.5 to 16 volts) Parameter Symbol Min Typ Irradiance(5) Positive Going Threshold Ee (+) 0.025 Hysteresis Ratio Ee (+)/Ee(-) 1.10 -- Supply Current ICC Peak to peak ripple which will cause false -- triggering QSE156 (BUFFER TOTEM POLE) VCC-2.1 High Level Output Voltage VOH Low Level Output Voltage VOL -- QSE157 (INVERTER TOTEM POLE) High Level Output Voltage VOH VCC-2.1 Low Level Output Voltage VOL -- QSE158 (BUFFER OPEN COLLECTOR) High Level Output Current IOH -- Low Level Output Voltage VOL -- QSE159 (INVERTER OPEN COLLECTOR) High Level Output Current IOH -- Low Level Output Voltage VOL -- QSE156, QSE157 Output rise, fall times tr, tf -- Propagation delay tphl, tplh QSE158, QSE159 Output rise, fall times tr, tf -- Propagation delay tphl, tplh (c) 2004 Fairchild Semiconductor Corporation Page 3 of 7 Max Units 0.250 2.00 5.0 mW/cm2 2.00 V f = DC to 50 MHZ -- 0.40 V V Ee = .3 mW/cm2, IOH = -1.0mA(5) Ee = 0, IOL = 16 mA -- 0.40 V V Ee = 0, IOH = -1.0mA Ee = .3 mW/cm2, IOL = 16mA(5) 100 0.40 A V Ee = .3mW/cm2, VOH = 30V(5) Ee = 0, IOL = 16mA 100 0.40 A V Ee = 0, VOH = 30V Ee = .3mW/cm2, IOL = 16mA(5) 70 nS S Ee = 0 or .3 mW/cm2, f = 10KHz DC = 50%, RL=360(5) 100 nS S Ee = 0 or .3 mW/cm2, f = 10KHz DC = 50%, RL=360(5) 6.0 6.0 mA Test Conditions TA = 25C Ee = 0 or .3 mW/cm2(5) 8/4/04 PLASTIC SILICON OPTOLOGIC(R) PHOTOSENSOR QSE156 QSE157 QSE158 QSE159 Typical Performance Curves - (Sensor Coupled to QEE113 Emitter) Fig. 2 Output Voltage vs. Input Current (Buffers) Fig. 1 Output Voltage vs. Input Current (Inverters) 6 6 VCC = 5 V RL = 270 TA = 25C d = 4mm VO- Output Voltage (V) 4 3 IF (OFF) VCC = 5 V RL = 270 TA = 25C d = 4mm 5 VO- Output Voltage (V) VOH 5 IF (ON) 2 VOH 4 3 IF (OFF) IF (ON) 2 1 1 VOL VOL 0 0 0 1 2 3 4 0 5 1 2 IF - Input Current (mA) Fig. 3 Threshold Current vs. Distance 4 5 Fig. 4 Normalized Threshold Current vs. Supply Voltage 10 8 6 1.6 IF - Normalized Threshold Current IF(ON) - Normalized Threshold Current 3 IF - Input Current (mA) 4 2 Normalized to: VCC = 5 V RL = 270 TA = 25 C d = 4mm Pulsed 100Hz PW = 100s 1.0 0.8 0.6 0.4 0.2 Normalized to: Turn ON Threshold VCC = 5 V TA = 25C 1.4 1.2 IF (ON) 1.0 0.8 IF (OFF) 0.6 0.4 0.2 0.1 0.0 0 2 4 6 8 10 12 14 d - Distance (mm) (c) 2004 Fairchild Semiconductor Corporation 0 2 4 6 8 10 12 14 16 VCC - Supply Voltage (V) Page 4 of 7 8/4/04 PLASTIC SILICON OPTOLOGIC(R) PHOTOSENSOR QSE156 QSE157 QSE158 QSE159 Fig. 6 Low Output Voltage vs. Output Current Fig. 5 Normalized Threshold Current vs. Ambient Temperature 1 Normalized to: VCC = 5 V TA = 25C 1.6 VCC = 5 V TA = 25C IF = 10 mA 1.4 VOL- Output Voltage, Low (V) IF - Normalized Threshold Current 1.8 IF (OFF) 1.2 IF (ON) 1.0 IF (ON) 0.8 IF (OFF) 0.6 0.4 0.1 0.2 0.01 0.0 -40 -20 0 20 40 60 80 100 1 10 IO - Output Current (mA) TA - Ambient Temperature (C) Fig. 7 Response Time vs. Forward Current 5 VCC = 5 V RL = 270 TA = 25C IF Pulsed T = 10 ms Duty Cycle = 50% Response Delay Time (us) 4 3 TPLH 2 TPHL 1 0 0 5 10 15 20 IF - Forward Current (mA) (c) 2004 Fairchild Semiconductor Corporation Page 5 of 7 8/4/04 PLASTIC SILICON OPTOLOGIC(R) PHOTOSENSOR QSE156 QSE157 QSE158 QSE159 Fig. 8 Switching Speed Test Circuit C2 5V R1 R2 .1 uf bypass Pulse Generator VO = 5V f = 10 KHz d.c. = 50% R 1 = 360 R 2 = 180 C1 GND C 1 and C2 include probe and stray wire capacitance C 1 = 15 pf C 2 = 20 pf Fig. 9 Switching Times Definition for Buffers Fig. 10 Switching Times Definition for Inverters 50% 50% 0 mA 0 mA t PLH t PHL t PHL t PLH VOH VOH Output VO 90% 10% 10% 90% Output VO 50% 10% 90% 10% VOL tr (c) 2004 Fairchild Semiconductor Corporation 90% VOL tf tf Page 6 of 7 tr 8/4/04 PLASTIC SILICON OPTOLOGIC(R) PHOTOSENSOR QSE156 QSE157 QSE158 QSE159 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. (c) 2004 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Page 7 of 7 8/4/04