SHT Series Surface Mount Aluminum Electrolytic Capacitors (High Temperature) MERITEK FEATURES 105C 1000 hours For high density mounting SPECIFICATIONS Item Characteristic Operation Temperature Range -55 ~ +105C Rated Working Voltage 6.3 ~ 50VDC Capacitance Tolerance (120Hz 20C) Leakage Current 20%(M) I 0.01CV or 3 ( A ) *Whichever is greater after 2 minutes (20C) I: Leakage Current ( A) C: Rated Capacitance ( F) W.V. 6.3 10 16 25 35 50 S.V. 8 13 20 32 44 63 W.V. 6.3 10 16 25 35 50 4~6.3 0.30 0.22 0.16 0.14 0.12 0.12 8~10 0.35 0.26 0.20 0.16 0.14 0.12 Rated Voltage (V) 6.3 10 16 25 35 50 -25C / +20C 4 3 2 2 2 2 -40C / +20C 8 6 4 4 3 3 Surge Voltage (20C) Dissipation Factor (tan ) (120Hz 20C) V: Working Voltage (V) tan Impedance ratio at 120Hz Low Temperature Stability After 1000 hours application of W.V. and +105C ripple current value, the capacitor shall meet the following limits. (DC + ripple peak voltage rate working voltage) Load Life Capacitance Change 30% of initial value for 6.3 W.V., 25% of initial value for 10~50 W.V. Dissipation Factor 200% of initial specified value Leakage current initial specified value At +105C, no voltage application after 1000 hours, the capacitor shall meet the limits for load life characteristics. (With voltage treatment) Shelf Life Capacitors placed on a 250C hot plate for 30 seconds with their electrode terminals facing downward will fulfill the following conditions after being cooled to room temperature. Resistance to Soldering Heat Capacitance Change 10% of initial value Dissipation Factor initial specified value Leakage current initial specified value PART NUMBERING SYSTEM SHT 50V Meritek Series Voltage Capacitance Capacitance expressed in microfarads (F). First two digits are significant figures. Third digit denotes number of zeros. 'R' denotes decimal point for values less than 10 F Tolerance M=20% Case Diameter Code Case Height (mm) The third digit denotes the first decimal place For example, 102 = 10.2mm 221 M J 102 Case Diameter Code D E F H J D 4.0 5.0 6.3 8.0 10.0 Rev. 7 SHT Series Surface Mount Aluminum Electrolytic Capacitors (High Temperature) MERITEK DIMENSIONS (mm) D 4.0 5.0 6.3 8.0 8.0 10.0 L 5.4 5.4 5.4 6.2 10.2 10.2 A H 4.3 5.5MAX 5.3 6.5MAX 6.6 7.8MAX 8.3 9.5MAX 8.3 10.0MAX 10.3 12.0MAX I 1.8 2.2 2.6 3.4 3.4 3.5 W 0.650.1 0.650.1 0.650.1 0.650.1 0.900.2 0.900.2 P 1.0 1.5 2.1 2.2 3.1 4.6 K 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.70 0.2 0.70 0.2 Case size Max ripple current CASE SIZE & MAX RIPPLE CURRENT 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 V Item 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 4x5.4 23 5x5.4 29 33 330 5x5.4 32 5x5.4 47 470 5x5.4 38 100 101 6.3x5.4 220 221 330 331 470 471 1000 102 1500 152 Cap. (uF) 6.3 DxL 10 R.C. DxL 16 35 DxL R.C. DxL R.C. 4x5.4 5x5.4 19 32 4x5.4 5x5.4 6.3x5.4 14 23 39 35 6.3x5.4 45 6.3x5.4 48 4x5.4 5x5.4 6.3x5.4 6.3x5.4 8x6.2 15 25 42 50 70 6.3x5.4 48 6.3x5.4 55 6.3x5.4 8x6.2 60 75 8x10.2 100 65 6.3x5.4 8x6.2 70 90 140 95 8x10.2 160 200 230 250 290 150 170 220 250 170 8x10.2 10x10.2 8x10.2 10x10.2 8x10.2 10x10.2 8x10.2 10x10.2 8x10.2 80 120 180 210 220 260 270 300 8x10.2 6.3x5.4 6.3x5.4 8x10.2 8x10.2 10x10.2 8x10.2 10x10.2 8x10.2 10x10.2 10x10.2 300 10x10.2 340 8x10.2 10x10.2 10x10.2 230 270 DxL 25 R.C. 8x10.2 10x10.2 R.C. :DxL (mm) : mA(rms) 105C 120Hz 50 DxL 4x5.4 4x5.4 4x5.4 4x5.4 4x5.4 4x5.4 4x5.4 5x5.4 6.3x5.4 8x6.2 R.C. 2 4 4 5 8 11 14 19 31 60 8x10.2 90 8x10.2 10x10.2 8x10.2 10x10.2 110 120 160 180 10x10.2 270 290 340 410 Rev. 7