1N6102 thru 1N6137A and 1N6138 thru 1N6173A Voidless-Hermetically-Sealed Bidirectional Transient Suppressors SCOTTSDALE DIVISION APPEARANCE This series of industry recognized voidless-hermetically-sealed Bidirectional Transient Voltage Suppressor (TVS) designs is military qualified to MIL-PRF-19500/516 and are ideal for high-reliability applications where a failure cannot be tolerated. They provide a Working Peak "Standoff" Voltage selection from 5.2 to 152 Volts with two package sizes for 500 W and 1500 W ratings. They are very robust in hard-glass construction and also use an internal metallurgical bond identified as Category I for high reliability applications. Both of these are also military qualified to MIL-PRF-19500/516. These devices are available as both a non-suffix part and an "A" suffix part involving different voltage tolerances as further described in note 4 on page 2. These devices are also available in a surface mount MELF package configuration by adding a "US" suffix (see separate data sheet for 1N6102US thru 1N6173AUS). Microsemi also offers numerous other TVS products to meet higher and lower peak pulse power and voltage ratings in both through-hole and surface-mount packages. "E" Package "G" Package WWW . Microsemi .C OM DESCRIPTION IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES * * * * * * * APPLICATIONS / BENEFITS High surge current and peak pulse power provides transient voltage protection for sensitive circuits Triple-layer passivation Internal "Category I" metallurgical bonds Voidless hermetically sealed glass package JAN/TX/TXV military qualifications available per MILPRF-19500/516 by adding JAN, JANTX, or JANTXV prefix (consult factory for 1N6102 and 1N6138) JANS available for 1N6103A thru 1N6118A per MILPRF-19500/516 as well as further options for screening in accordance with MIL-PRF-19500 for JANS on all others in this series by using a "SP" prefix, e.g. SP6119A, SP6143A, etc. Surface Mount equivalents are also available in a square-end-cap MELF configuration with a "US" suffix (see separate data sheet) MAXIMUM RATINGS o * * * * * * * * * Military and other high reliability transient protection Extremely robust construction Extensive range in Working Peak "Standoff" Voltage (VWM) from 5.2 to 152 V Available as either 500 W or 1500 W Peak Pulse Power (PPP) using two different size packages ESD and EFT protection per IEC6100-4-2 and IEC61000-4-4 respectively Secondary lightning protection per select levels in IEC61000-4-5 Flexible axial-leaded mounting terminals Nonsensitive to ESD per MIL-STD-750 Method 1020 Inherently radiation hard as described in Microsemi MicroNote 050 MECHANICAL AND PACKAGING o Copyright 2004 10-08-2004 REV A Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 1N6102 - 1N6137A 1N6138 - 1N6173A * CASE: Hermetically sealed voidless hard glass * Operating & Storage Temperature: -55 C to +175 C with Tungsten slugs * Peak Pulse Power at 25oC: 500 Watts for 1N6102 to * TERMINATIONS: Axial-leads are Tin/Lead 1N6137A and 1500 Watts for 1N6138 to 1N6173A @ (Sn/Pb) over copper except for JANS with solid 10/1000 s (also see Figures 1,2 and 3) Silver (Ag) and no finish * Impulse repetition rate (duty factor): 0.01% * MARKING: Body painted and part number, etc. * Steady-State Power: 3.0 W for 1N6102 to 1N6137A and * POLARITY: No polarity marking for these 5.0 W for 1N6138 to 1N6173A @ TL = 75oC @3/8 inch bidirectional TVSs lead length from body (see Figure 4) * Tape & Reel option: Standard per EIA-296 * Steady-State Power: 2.0 W for 1N6102 to 1N6137A and 3.0 W for 1N6138 to 1N6173A @ TA=25oC (see note * Weight: 750 mg for 500 Watt (E Package) below and Figure 5) 1270 mg for 1500 Watt (G Package) * Thermal Resistance @ 3/8 inch lead length: * See package dimensions on last page for both 33.5 oC/W for 1N6102 to 1N6137A and 20.0 oC/W for the "E" and "G" size packages 1N6138 thru 1N6173A * Solder Temperatures: 260oC for 10 s (maximum) NOTE: Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where TOP or TJ(MAX) is not exceeded. 1N6102 thru 1N6137A and 1N6138 thru 1N6173A Voidless-Hermetically-Sealed Bidirectional Transient Suppressors SCOTTSDALE DIVISION INDUSTRY TYPE NUMBER (Note 4) PPP Rating 500W 1500W 1N6102A 1N6138A 1N6103A 1N6139A 1N6104A 1N6140A 1N6105A 1N6141A 1N6106A 1N6142A 1N6107A 1N6143A 1N6108A 1N6144A 1N6109A 1N6145A 1N6110A 1N6146A 1N6111A 1N6147A 1N6112A 1N6148A 1N6113A 1N6149A 1N6114A 1N6150A 1N6115A 1N6151A 1N6116A 1N6152A 1N6117A 1N6153A 1N6118A 1N6154A 1N6119A 1N6155A 1N6120A 1N6156A 1N6121A 1N6157A 1N6122A 1N6158A 1N6123A 1N6159A 1N6124A 1N6160A 1N6125A 1N6161A 1N6126A 1N6162A 1N6127A 1N6163A 1N6128A 1N6164A 1N6129A 1N6165A 1N6130A 1N6166A 1N6131A 1N6167A 1N6132A 1N6168A 1N6133A 1N6169A 1N6134A 1N6170A 1N6135A 1N6171A 1N6136A 1N6172A 1N6137A 1N6173A Volts 6.12 7.13 7.79 8.65 9.50 10.45 11.40 12.35 14.25 15.20 17.10 19.0 20.9 22.8 25.7 28.5 31.4 34.2 37.1 40.9 44.7 48.5 53.2 58.9 64.6 71.3 77.9 86.5 95.0 104.5 114.0 123.5 142.5 152.0 171.0 190.0 mA 175 175 150 150 125 125 100 100 75 75 65 65 50 50 50 40 40 30 30 30 25 25 20 20 20 20 15 15 12 12 10 10 8 8 5 5 RATED STANDOFF VOLTAGE VWM V 5.2 5.7 6.2 6.9 7.6 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56.0 62.2 69.2 76.0 86.6 91.2 98.8 114.0 121.6 136.8 152.0 MAXAXIMUM STANDBY CURRENT ID@ VWM 500W 1500W uA uA 100 500 50 300 20 100 20 100 20 100 20 20 20 20 20 20 20 20 20 20 1 10 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 MAXIMUM CLAMPING VOLTAGE VC @ IPP Volts 10.5 11.2 12.1 13.4 14.5 15.6 16.9 18.2 21.0 22.3 25.1 27.7 30.5 33.3 37.4 41.6 45.7 49.9 53.6 59.1 64.6 70.1 77.0 85.3 97.1 103.1 112.8 125.1 137.6 151.3 165.1 178.8 206.3 218.4 245.7 273.0 MAXIMUM PEAK PULSE CURRENT IPP 500 W Amps 47.6 44.6 41.3 37.3 34.5 32.0 29.6 27.5 23.8 22.4 19.9 18.0 16.4 15.0 13.4 12.0 10.9 10.0 9.3 8.5 7.7 7.1 6.5 5.9 5.1 4.8 4.4 4.0 3.6 3.3 3.0 2.8 2.4 2.3 2.0 1.8 1500 W Amps 142.8 133.9 124.0 111.9 103.4 96.2 88.8 82.4 71.4 67.3 59.8 54.2 49.2 45.0 40.1 36.0 32.8 30.1 28.0 25.4 23.2 21.4 19.5 17.6 15.4 14.5 13.3 12.0 10.9 9.9 9.1 8.4 7.3 6.9 6.1 5.5 Note: 4 1 1 1 2 3 1 2 3 Applies to both 500 W and 1500 W series for devices shown (see note 4) Applies only to 500 W series (1N6102 thru 1N6137A). Applies only to 1500 W series (1N6138 thru 1N6173A). Part number without the A suffix has 5% higher VC, 5% lower minimum V(BR), and 5% lower IPP. Symbol VBR VWM ID VC PPP Copyright 2004 10-08-2004 REV A MAXIMUM TEMP. COEF. OF V(BR) o %/ C .05 .06 .06 .06 .07 .07 .07 .08 .08 .08 .085 .085 .085 .09 .09 .09 .095 .095 .095 .095 .095 .095 .095 .100 .100 .100 .100 .100 .100 .100 .100 .105 .105 .105 .110 .110 1 SYMBOLS & DEFINITIONS Definition Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. Working Peak Voltage: The maximum peak voltage that can be applied over the operating temperature range. This is also referred to as Standoff Voltage. Maximum Standoff Current: The maximum current that will flow at the specified voltage and temperature. Maximum clamping voltage at specified IPP (Peak Pulse Current) at the specified pulse conditions. Peak Pulse Power: The peak power dissipation resulting from the peak impulse current IPP. Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2 1N6102 - 1N6137A 1N6138 - 1N6173A Notes: 1. 2. 3. 4. MINIMUM BREAKDOWN VOLTAGE V(BR) @ I(BR) WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS 1N6102 thru 1N6137A and 1N6138 thru 1N6173A SCOTTSDALE DIVISION Voidless-Hermetically-Sealed Bidirectional Transient Suppressors MAX PEAK PULSE POWER (PPP) OR CURRENT (IPP) IN PERCENT OF MAX RATINGS 10,000 1000 100 Peak Pulse Power (PPP) WWW . Microsemi .C OM GRAPHS PULSE TIME (tp) FIGURE 1 PEAK PULSE POWER vs. PULSE TIME o JUNCTION TEMPERATURE (TJ) IN C PULSE CURRENT (IPP) IN PERCENT OF IPP FIGURE 2 PEAK PULSE POWER vs. TJ (prior to impulse) TIME (t) IN MILLISECONDS Copyright 2004 10-08-2004 REV A Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 1N6102 - 1N6137A 1N6138 - 1N6173A FIGURE 3 PULSE WAVE FORM Page 3 1N6102 thru 1N6137A and 1N6138 thru 1N6173A Voidless-Hermetically-Sealed Bidirectional Transient Suppressors WWW . Microsemi .C OM MAXIMUM STEADY-STATE POWER IN WATTS SCOTTSDALE DIVISION LEAD TEMPERATURE LEAD TEMPERATURE FIGURE 4 MAXIMUM POWER vs. LEAD TEMPERATURE o Maximum lead temperature in C (TL) at point "L" from body (for maximum operating junction temperature with equal two-lead conditions.) o AMBIENT TEMPERATURE (TA) in C FIGURE 5 STEADY-STATE DERATING CURVE FOR FREE-AIR MOUNTING (For PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where TOP or TJ(MAX) rating is not exceeded) PACKAGE DIMENSIONS Inches [mm] PACKAGE E Note: Package E lead dimension diameter is 0.030 inch nominal with -.004 +.003 inch tolerance 1N6102 - 1N6137A 1N6138 - 1N6173A PACKAGE G Note: Package G lead dimension diameter is 0.040 inch nominal with -.004 +.002 inch tolerance Copyright 2004 10-08-2004 REV A Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 4