JAN1N6127 - Microsemi Corp. - Datasheet.Directory

rectional Voidless-Hermetically-Sealed Bidi

Transient Suppressors

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 1

10-08-2004 REV A

WWW.Microsemi .COM

SCOTTSDALE DIVISION

1N6102 thru 1N6137A

and 1N6138 thru 1N6173A

1N6102 – 1N6137A

1N6138 – 1N6173A

DESCRIPTION APPEARANCE

This series of industry recognized voidless-hermetically-sealed Bidirectional Transient

Voltage Suppressor (TVS) designs is military qualified to MIL-PRF-19500/516 and are

ideal for high-reliability applications where a failure cannot be tolerated. They provide

a Working Peak “Standoff” Voltage selection from 5.2 to 152 Volts with two package

sizes for 500 W and 1500 W ratings. They are very robust in hard-glass construction

and also use an internal metallurgical bond identified as Category I for high reliability

applications. Both of these are also military qualified to MIL-PRF-19500/516. These

devices are available as both a non-suffix part and an “A” suffix part involving different

voltage tolerances as further described in note 4 on page 2. These devices are also

available in a surface mount MELF package configuration by adding a “US” suffix (see

separate data sheet for 1N6102US thru 1N6173AUS). Microsemi also offers

numerous other TVS products to meet higher and lower peak pulse power and voltage

ratings in both through-hole and surface-mount packages.

“E” Package

“G” Package

IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com

FEATURES APPLICATIONS / BENEFITS

• High surge current and peak pulse power provides

transient voltage protection for sensitive circuits

• Triple-layer passivation

• Internal “Category I” metallurgical bonds

• Voidless hermetically sealed glass package

• JAN/TX/TXV military qualifications available per MIL-

PRF-19500/516 by adding JAN, JANTX, or JANTXV

prefix (consult factory for 1N6102 and 1N6138)

• JANS available for 1N6103A thru 1N6118A per MIL-

PRF-19500/516 as well as further options for screening

in accordance with MIL-PRF-19500 for JANS on all

others in this series by using a “SP” prefix, e.g.

SP6119A, SP6143A, etc.

• Surface Mount equivalents are also available in a

square-end-cap MELF configuration with a “US” suffix

(see separate data sheet)

• Military and other high reliability transient

protection

• Extremely robust construction

• Extensive range in Working Peak “Standoff”

Voltage (VWM) from 5.2 to 152 V

• Available as either 500 W or 1500 W Peak Pulse

Power (PPP) using two different size packages

• ESD and EFT protection per IEC6100-4-2 and

IEC61000-4-4 respectively

• Secondary lightning protection per select levels

in IEC61000-4-5

• Flexible axial-leaded mounting terminals

• Nonsensitive to ESD per MIL-STD-750 Method

1020

• Inherently radiation hard as described in

Microsemi MicroNote 050

MAXIMUM RATINGS MECHANICAL AND PACKAGING

• Operating & Storage Temperature: -55oC to +175oC

• Peak Pulse Power at 25oC: 500 Watts for 1N6102 to

1N6137A and 1500 Watts for 1N6138 to 1N6173A @

10/1000 µs (also see Figures 1,2 and 3)

• Impulse repetition rate (duty factor): 0.01%

• Steady-State Power: 3.0 W for 1N6102 to 1N6137A and

5.0 W for 1N6138 to 1N6173A @ TL = 75oC @3/8 inch

lead length from body (see Figure 4)

• Steady-State Power: 2.0 W for 1N6102 to 1N6137A and

3.0 W for 1N6138 to 1N6173A @ TA=25oC (see note

below and Figure 5)

• Thermal Resistance @ 3/8 inch lead length:

33.5 oC/W for 1N6102 to 1N6137A and 20.0 oC/W for

1N6138 thru 1N6173A

• Solder Temperatures: 260oC for 10 s (maximum)

• CASE: Hermetically sealed voidless hard glass

with Tungsten slugs

• TERMINATIONS: Axial-leads are Tin/Lead

(Sn/Pb) over copper except for JANS with solid

Silver (Ag) and no finish

• MARKING: Body painted and part number, etc.

• POLARITY: No polarity marking for these

bidirectional TVSs

• Tape & Reel option: Standard per EIA-296

• Weight: 750 mg for 500 Watt (E Package)

1270 mg for 1500 Watt (G Package)

• See package dimensions on last page for both

the “E” and “G” size packages

NOTE: Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from

mounting point to ambient is sufficiently controlled where TOP or TJ(MAX) is not exceeded.

Voidless-Hermetically-Sealed Bidirectional

Transient Suppressors

SCOTTSDALE DIVISION

1N6102 thru 1N6137A

and 1N6138 thru 1N6173A

WWW.Microsemi .COM 1N6102 – 1N6137A

1N6138 – 1N6173A

ELECTRICAL CHARACTERISTICS

INDUSTRY TYPE

NUMBER

(Note 4)

PPP Rating

MINIMUM BREAKDOWN

VOLTAGE

V(BR) @ I(BR)

RATED

STANDOFF

VOLTAGE

VWM

MAXAXIMUM

STANDBY

CURRENT

ID@ VWM

500W 1500W

MAXIMUM

CLAMPING

VOLTAGE

VC @ IPP

MAXIMUM

PEAK PULSE

CURRENT IPP

500 W 1500 W

MAXIMUM

TEMP.

COEF. OF

V(BR)

500W 1500W Volts mA V uA uA Volts Amps Amps %/oC

1N6102A 1N6138A 6.12 175 5.2 100 500 10.5 47.6 142.8 .05

1N6103A 1N6139A 7.13 175 5.7 50 300 11.2 44.6 133.9 .06

1N6104A 1N6140A 7.79 150 6.2 20 100 12.1 41.3 124.0 .06

1N6105A 1N6141A 8.65 150 6.9 20 100 13.4 37.3 111.9 .06

1N6106A 1N6142A 9.50 125 7.6 20 100 14.5 34.5 103.4 .07

1N6107A 1N6143A 10.45 125 8.4 20 20 15.6 32.0 96.2 .07

1N6108A 1N6144A 11.40 100 9.1 20 20 16.9 29.6 88.8 .07

1N6109A 1N6145A 12.35 100 9.9 20 20 18.2 27.5 82.4 .08

1N6110A 1N6146A 14.25 75 11.4 20 20 21.0 23.8 71.4 .08

1N6111A 1N6147A 15.20 75 12.2 20 20 22.3 22.4 67.3 .08

1N6112A 1N6148A 17.10 65 13.7 1 10 25.1 19.9 59.8 .085

1N6113A 1N6149A 19.0 65 15.2 1 5 27.7 18.0 54.2 .085

1N6114A 1N6150A 20.9 50 16.7 1 5 30.5 16.4 49.2 .085

1N6115A 1N6151A 22.8 50 18.2 1 5 33.3 15.0 45.0 .09

1N6116A 1N6152A 25.7 50 20.6 1 5 37.4 13.4 40.1 .09

1N6117A 1N6153A 28.5 40 22.8 1 5 41.6 12.0 36.0 .09

1N6118A 1N6154A 31.4 40 25.1 1 5 45.7 10.9 32.8 .095

1N6119A 1N6155A 34.2 30 27.4 1 5 49.9 10.0 30.1 .095

1N6120A 1N6156A 37.1 30 29.7 1 5 53.6 9.3 28.0 .095

1N6121A 1N6157A 40.9 30 32.7 1 5 59.1 8.5 25.4 .095

1N6122A 1N6158A 44.7 25 35.8 1 5 64.6 7.7 23.2 .095

1N6123A 1N6159A 48.5 25 38.8 1 5 70.1 7.1 21.4 .095

1N6124A 1N6160A 53.2 20 42.6 1 5 77.0 6.5 19.5 .095

1N6125A 1N6161A 58.9 20 47.1 1 5 85.3 5.9 17.6 .100

1N6126A 1N6162A 64.6 20 51.7 1 5 97.1 5.1 15.4 .100

1N6127A 1N6163A 71.3 20 56.0 1 5 103.1 4.8 14.5 .100

1N6128A 1N6164A 77.9 15 62.2 1 5 112.8 4.4 13.3 .100

1N6129A 1N6165A 86.5 15 69.2 1 5 125.1 4.0 12.0 .100

1N6130A 1N6166A 95.0 12 76.0 1 5 137.6 3.6 10.9 .100

1N6131A 1N6167A 104.5 12 86.6 1 5 151.3 3.3 9.9 .100

1N6132A 1N6168A 114.0 10 91.2 1 5 165.1 3.0 9.1 .100

1N6133A 1N6169A 123.5 10 98.8 1 5 178.8 2.8 8.4 .105

1N6134A 1N6170A 142.5 8 114.0 1 5 206.3 2.4 7.3 .105

1N6135A 1N6171A 152.0 8 121.6 1 5 218.4 2.3 6.9 .105

1N6136A 1N6172A 171.0 5 136.8 1 5 245.7 2.0 6.1 .110

1N6137A 1N6173A 190.0 5 152.0 1 5 273.0 1.8 5.5 .110

Note: 4 1 1 1 2 3 1 2 3 1

Notes: 1. Applies to both 500 W and 1500 W series for devices shown (see note 4)

2. Applies only to 500 W series (1N6102 thru 1N6137A).

3. Applies only to 1500 W series (1N6138 thru 1N6173A).

4. Part number without the A suffix has 5% higher VC, 5% lower minimum V(BR), and 5% lower IPP.

SYMBOLS & DEFINITIONS

Symbol Definition

VBR Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.

VWM Working Peak Voltage: The maximum peak voltage that can be applied over the operating temperature range.

This is also referred to as Standoff Voltage.

ID Maximum Standoff Current: The maximum current that will flow at the specified voltage and temperature.

VC Maximum clamping voltage at specified IPP (Peak Pulse Current) at the specified pulse conditions.

PPP Peak Pulse Power: The peak power dissipation resulting from the peak impulse current IPP.

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 2

10-08-2004 REV A

Voidless-Hermetically-Sealed Bidirectional

Transient Suppressors

SCOTTSDALE DIVISION

1N6102 thru 1N6137A

and 1N6138 thru 1N6173A

WWW.Microsemi .COM 1N6102 – 1N6137A

1N6138 – 1N6173A

GRAPHS

PULSE TIME (tp)

FIGURE 1

PEAK PULSE POWER vs. PULSE TIME

MAX PEAK PULSE POWER (PPP) OR

CURRENT (IPP) IN PERCENT OF MAX RATINGS

Peak Pulse Power (PPP)

100 1000 10,000

JUNCTION TEMPERATURE (TJ) IN oC

FIGURE 2

PEAK PULSE POWER vs. TJ

(prior to impulse)

PULSE CURRENT (IPP)

IN PERCENT OF IPP

TIME (t) IN MILLISECONDS

FIGURE 3

PULSE WAVE FORM

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 3

10-08-2004 REV A

Voidless-Hermetically-Sealed Bidirectional

Transient Suppressors

Microsemi

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 4

10-08-2004 REV A

WWW.Microsemi .COM

SCOTTSDALE DIVISION

1N6102 thru 1N6137A

and 1N6138 thru 1N6173A

1N6102 – 1N6137A

1N6138 – 1N6173A

MAXIMUM STEADY-STATE POWER IN WATTS

LEAD TEMPERATURE LEAD TEMPERATURE AMBIENT TEMPERATURE (TA) in oC

FIGURE 4 FIGURE 5

MAXIMUM POWER vs. LEAD TEMPERATURE STEADY-STATE DERATING CURVE

FOR FREE-AIR MOUNTING

Maximum lead temperature in oC (TL) at point “L” from body (For PC boards where thermal resistance from

(for maximum operating junction temperature with equal two-lead conditions.) mounting point to ambient is sufficiently controlled

where TOP or TJ(MAX) rating is not exceeded)

PACKAGE DIMENSIONS Inches [mm]

PACKAGE E

Note: Package E lead dimension diameter is 0.030 inch nominal with –.004 +.003 inch tolerance

PACKAGE G

Note: Package G lead dimension diameter is 0.040 inch nominal with –.004 +.002 inch tolerance