Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 800/801/802/803 Series Panel Mount Enclosed Fuse Holders RoHS Pb Product Characteristics 800 Series Holder 815 Cap FOR 5x20MM FUSES Series: 800 Compatible Fuses 5x20mm 5x20mm 6.3x32mm 6.3x32mm 6.3x32mm Holder/Cap: Black Thermoplastic, UL94 V-0 800 01 Series Holder 800 01 801/802 816 Cap FOR 6.3x32MM FUSES 803 01 Series Holder Electrical Data (23C) Agency Approval Agency Agency Approvals Agency File Number 122016 123336 120629 6914 E70164 E70164 E70164 E70164 47574 47574 47574 47574 121076 (802 only) Additional Information Mounting Terminals Datasheet 801 Series Resources 800 Series Resources 801 Series Samples 800 Series Samples 801 Series Datasheet 802 Series Resources 802 Series Samples 802 Series Datasheet 803 Series Resources 803 Series Samples 803 Series Metal Parts: Copper alloy, corrosion protected Terminals: Solderable, tinned Rated Voltage: Rated Voltage: Rated Voltage: 250V 250V 250V Rated Current: Rated Current: Rated Current: 6.3A (800+815 10A (800+816 6.3 A (VDE) - VDE) - VDE) with cap 815 10A (800+816 16A (UL/CSA) 10 A (VDE) with - VDE) cap 816 16A (UL/CSA) Rated Power: 2.5W (VDE) 12.7mm diameter D-hole or double D-hole Admissible torque on plastic hex nut is 1.2Nm Rated Voltage: 500V Rated Current: 10 A (VDE) 16 A (UL CSA) Rated Power: 4W (VDE) Pluggable with clamping spring in 12.7mm diameter D-hole (panel of 0.75mm - 3 mm) Solderable or 4.8mm quick connect-fits 0.5mm tab Protection Category IP 40 (IEC 60529) PC2 (IEC 60127-6) Operating Temperature -25C to +70C Climatic Test -25C/+70C/21 days (IEC 60068-2-1...3) Stock Conditions +10C to +60C relative humidity 75% yearly average, without dew, maximum value for 30 days - 95% Vibration Resistance 24 cycles at 15 min. each (IEC 60068-2-6) 10 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration 5m Contact Resistance Datasheet 800 Series 6.3x32mm Clamp spring: non-corrosion metal, untreated Materials 801/802 Series Holder 803 01 Dielectric Strength > 1.5 kV Impulse Voltage 4 kV, 50 Hz, 1 min., dry Insulation Resistance > 103 M (500 VDC, 1 min.) Solderability 235C, 3 sec. (Wave) 350C, 1 sec. (Soldering Iron) Solder Heat Resistance 260C, 5 sec. (IEC 60068-2-20) Min. Cross Section Conductor - 2.5mm2 Marking Unit Weight 800, 250V, Approvals 4.7g (Holder) 2.5g (Cap) 800 01, 250V, Approvals NA 235C, 2 sec. (Wave) 350C, 1 sec. (Soldering Iron) 235C, 2 sec. (Wave) 350 C, 3 sec. (Soldering Iron) Series, 250V, Approvals 5.0g (801/802) 2.5g (815/816) 803, 500V, Approvals 4.9g (803) 2.0g (816) Ordering Information Holders Caps 801 0000 0005 803 0000 0105 802 0000 0005 For 5x20mm fuse: 815 0000 0005 For 6.3x32mm fuse 816 0000 0005 800 0000 0005 800 0000 0105 Packaging Bulk 100 Pcs all items listed above (c) 2015 Littelfuse, Inc. Specifications are subject change recommended. without notice. Specifications are subject to change without notice. Application testing istostrongly Revised: 08/11/15 Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted Dimensions (millimeters) 800 Series 801/802 Series 0,5 4,45 7,62 M12,7x1,5 4,45 0,5 max.0,2 7,62 +- 0,1 distance Fuse carrier inserted max. 0,2 M12,7x1,5(0,75) fuse-carrier inserted bayonet-joint 2,5 SW14 15 4,8+- 0,1 R1 4,8 SW14 o16 o15 3,2 2,5 front panel 3,2 16 Bayonet-joint A 1...6 5 45.7 8 5,5 1...6 5 8 o12,7-0,1 11,7 - 0,15 o12,7- 0, 1 45,7 11,7-0,15 12- 0,1 12,7 -0,1 815/816 Cap 803 01 Series Bayonet-connector-nose Clamp spring o 9,2 Slot for screwdriver Bayonet-connector-nose Front Panel 7 4,81,0 o15 3,2 2,5 R1 5,5 0,75...3 45,7 1,5 8 max. 34 Cap 815 max. 33,8 Cap 816 4,45 12 -0,1 7,620,1 0,5 0,2 12,7- 0,1 (c) 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/11/15 1,2