Dual Surface Mount Low Leakage Diode Features: * * * SOT-523 Medium Speed Current Applications Very Low Leakage Current Surface Mount Package Ideally Suited for Automatic Insertion Applications: * Small Signal Switching Maximum Ratings: Ratings at 25C unless otherwise specified. Parameter Symbol Value Unit VRRM VRWM VR 85 V VR(RMS) 60 V Peak forward surge current at t=1s at t=1ms at t=1s IFSM 4 1 0.5 A Forward continuous current single diode double diode IFM 160 140 mA Repetitive peak forward current IFRM 500 mA Power dissipation PD 150 mW Thermal resistance junction to ambient air RJA 500 C/W Operating and storage temperature range Tj,TSTG -65 to +150 C Repetitive peak reverse voltage working peak reverse voltage DC Reverse voltage RMS reverse voltage www.element14.com www.farnell.com www.newark.com Page <1> 26/02/13 V1.0 Dual Surface Mount Low Leakage Diode Electrical Characteristics: Ratings at 25C unless otherwise specified Parameter Symbol Test conditions Min. Max. Unit V(BR) IR= 100A 85 - V IR VR=75V VR=75V Tj=150C - 5 80 nA Forward voltage VF IF=1mA IF=10mA IF=50mA IF=150mA - 900 1,000 1,100 1,250 mV Junction capacitance Cj VR=0V f=1MHz 2 pF Reverse recovery time trr IF=IR=10mA Irr=0.1 x IR RL=100 3 S Reverse breakdown voltage Reverse voltage leakage current - Typical Characteristics: Ta = 25C unless otherwise specified www.element14.com www.farnell.com www.newark.com Page <2> 26/02/13 V1.0 Dual Surface Mount Low Leakage Diode Package Outline: Plastic surface mounted package SOT-523 Dim. Min. Max. A 1.5 1.7 B 0.75 0.85 C 0.6 0.8 D 0.15 0.3 G 0.9 1.1 H 0.02 0.1 J K 0.1 Typ. 1.45 1.75 Dimensions : Millimetres Soldering Footprint: Package Information: Device Package Shipping BAV199T-7-F SOT-523 3,000 / Tape & Reel Part Number Table Dimensions : Millimetres Description Part Number Dual Surface Mount Low Leakage Diode BAV199T-7-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 26/02/13 V1.0