2N3714 MECHANICAL DATA Dimensions in mm (inches) NPN SILICON EPIBASE TRANSISTOR 25.15 (0.99) 26.67 (1.05) 6.35 (0.25) 9.15 (0.36) 1 1.52 (0.06) 3.43 (0.135) 2 22.23 (0.875) max. 0.97 (0.060) 1.10 (0.043) 16.64 (0.655) 17.15 (0.675) 29.9 (1.177) 30.4 (1.197) 38.61 (1.52) 39.12 (1.54) 10.67 (0.42) 11.18 (0.44) FEATURES 3 (case) * SILICON EPIBASE NPN TRANSISTOR 3.84 (0.151) 4.09 (0.161) 7.92 (0.312) 12.70 (0.50) * CECC SCREENING OPTIONS * LOW FREQUENCY TO-3 (TO-204AA) Underside View PIN 1 - Base PIN 2 - Emitter Case - Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25C unless otherwise stated) VCBO VCEO VEBO IC IB Ptot TJ , TSTG RJCase Collector - Base Voltage (IE = 0) Collector - Emitter Voltage (IB = 0) Emitter - Base Voltage (IC = 0) Collector Current Base Current Maximum Total Power Dissipation @ TC = 25C Operating and Storage Junction Temperature Range Thermal Resistance Junction to Case 100V 80V 7V 10A 4A 150W -65 to +200C 1.17C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5267 Issue 1 2N3714 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise stated) Parameter Test Conditions Min. Typ. Max. Unit VCE(sat)* Collector - Emitter Saturation Voltage IC = 5A IB = 0.5A 1 VBE(sat)* Base - Emitter Saturation Voltage IC = 5A IE = 0.5A 2 VBE* Base - Emitter Voltage VCE = 2V IC = 3A hFE* DC Current Gain VCE = 2V IC = 1A 25 VCE = 2V IC = 3A 15 VCE = 4V IC = 10A 5 ICEX fT Collector - Emitter Cut-off Current* Transistion Frequency* 1.5 90 -- VCE = 100V VEB = 1.5V 1 VCE = 80V TCASE = 150C 10 VCE = 10V VEB = 0.5A f = 1MHz V 4.0 mA MHz * Pulse Length = 300s,duty cycle 1.5%. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5267 Issue 1