2N3714
NPN SILICON EPIB ASE
TRANSISTOR
FEATURES
• SILICON EPIBASE NPN TRANSISTOR
• CECC SCREENING OPTIONS
• LOW FREQUENCY
VCBO Collector – Base Voltage (IE= 0)
VCEO Collector – Emitter Voltage (IB= 0)
VEBO Emitter – Base Voltage (IC= 0)
ICCollector Current
IBBase Current
Ptot Maximum Total Power Dissipation @ TC= 25°C
TJ, TSTG Operating and Storage Junction Temperature Range
RθJCase Thermal Resistance Junction to Case
100V
80V
7V
10A
4A
150W
–65 to +200°C
1.17°C/W
MECHANICAL DATA
Dimensions in mm (inches)
TO-3 (TO-204AA)
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
PIN 1 – Base
Underside View
PIN 2 – Emitter Case – Collector
12
3
(case)
25.15 (0.99)
26.67 (1.05)
10.67 (0.42)
11.18 (0.44)
38.61 (1.52)
39.12 (1.54)
29.9 (1.177)
30.4 (1.197)
16.64 (0.655)
17.15 (0.675)
3.84 (0.151)
4.09 (0.161)
0.97 (0.060)
1.10 (0.043)
7.92 (0.312)
12.70 (0.50)
22.23
(0.875)
max.
6.35 (0.25)
9.15 (0.36)
1.52 (0.06)
3.43 (0.135)
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5267
Issue 1
2N3714
Parameter Test Conditions Min. Typ. Max. Unit
1
2
1.5
25 90
15
51
10
4.0
IC= 5A IB= 0.5A
IC= 5AI
E= 0.5A
VCE = 2V IC= 3A
VCE = 2V IC= 1A
VCE = 2V IC= 3A
VCE = 4V IC= 10A
VCE = 100V VEB = 1.5V
VCE = 80V TCASE = 150°C
VCE = 10V VEB = 0.5A
f = 1MHz
VCE(sat)*Collector – Emitter Saturation Voltage
VBE(sat)*Base – Emitter Saturation Voltage
VBE*Base – Emitter Voltage
hFE*DC Current Gain
ICEX Collector – Emitter Cut-off Current*
fTTransistion Frequency*
V
—
mA
MHz
ELECTRICAL CHARACTERISTICS (TA= 25°C unless otherwise stated)
* Pulse Length = 300µs,duty cycle 1.5%.
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5267
Issue 1
