ABP SERIES 32305128 Issue G Basic Board Mount Pressure Sensors High Accuracy, Compensated/Amplified 60 mbar to 10 bar | 6 kPa to 1 MPa | 1 psi to 150 psi Digital or Analog Output, Liquid Media Capable DESCRIPTION The ABP Series are piezoresistive silicon pressure sensors offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. They are calibrated and temperature compensated for sensor offset, sensitivity, temperature effects and accuracy errors (which include nonlinearity, repeatability and hysteresis) using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. All products are designed and manufactured according to ISO 9001 standards. * Dry gases option: The input port is limited to non-corrosive, non-ionic media (e.g., dry air, gases) and should not be exposed to condensation. The gases are limited to media compatible with high temperature polyamide, silicone, alumina ceramic, silicon, gold, and glass. * Liquid media option: Includes an additional silicone-based gel coating to protect the electronics under port P1, which enables use with non-corrosive liquids (e.g. water and saline) and in applications where condensation can occur. Since port P2 is designed for use with non-corrosive liquids, this option is often suitable for wet-wet differential sensing. DIFFERENTIATION * Enhanced accuracy helps the design engineer fully understand the error in measurement. * Wide supply voltage range offers design flexibility. * Power consumption when utilizing sleep mode option allows for use in battery-powered applications. VALUE TO CUSTOMERS * Simplifies design-in: Small size saves room on the PC board (PCB), or simplifies design in smaller and lower power devices. Meets Moisture Sensitivity Level 1 requirements, which allows for unlimited shelf life when stored at <30 C/85 %RH and, under most storage conditions, allows for PCB soldering without any material concern about solder joint quality due Sensing and Internet of Things * * * * * * to aging of the sensor terminals, which minimizes the concern about aging of the terminals prior PCB assembly. Pressure choices allow engineers to select range required for their application. Leadless SMT, SMT, and DIP package options. Cost-effective: Small size helps engineers reduce design and manufacturing costs while maintaining enhanced performance and reliability of the systems they design. Accurate: Total Error Band (TEB) and wide pressure range enable engineers to optimize system performance by improving resolution and system accuracy. Optional internal diagnostics validate that the sensor readings are correct. Flexible: Supply voltage range, variety of pressure units, types, and ranges, output options, and wide operating temperature range simplify use in the application. Versatile: Wet-media compatibility, sleep mode, and temperature output options make the sensor a versatile choice for Internet of Things applications. Honeywell Brand: Utilize proprietary Honeywell technology, and are protected by multiple global patents. Food Safety Certification for North America, Europe and Asia. POTENTIAL APPLICATIONS * Medical: CPAP, blood analysis, blood pressure monitoring, breast pumps, drug dosing, hospital beds, massage machines, oxygen concentrators, patient monitoring, sleep apnea equipment, urine analyzers, ventilators/portable ventilators, and wound therapy * Industrial: Air brakes, HVAC/ transmitters, life sciences, material handling, pneumatic control and regulation, process gas monitoring, and valve positioning/positioners * Commercial: Air beds, coffee makers, and washing machines FEATURES * Measures gage and differential pressures * Total Error Band (see Figure 1): 1.5 %FSS * Liquid media option: Allows for wet/wet operation on dual ported devices * Industry-leading long-term stability: 0.25 %FSS * Industry-leading accuracy: 0.25 %FSS BFSL * Wide pressure range: 60 mbar to 10 bar | 6 kPa to 1 MPa | 1 psi to 150 psi * As small as 8 mm x 7 mm * High burst pressures (see Table 7) * Calibrated over temperature range of 0C to 50C [32F to 122F] * Operates from a single power supply of either 3.3 Vdc or 5.0 Vdc * Output: Ratiometric analog or I2C- or SPI-compatible 12-bit digital * Power consumption: 2 A typical when utilizing sleep mode option * Meets IPC/JEDEC J-STD-020D.1 Moisture Sensitivity Level 1 requirements * REACH and RoHS compliant * Options: Internal diagnostic function, liquid media, sleep mode, temperature output * Sensor materials have been tested and certified for these food safety standards: -NSF-169 - BPA Free -LFGB PORTFOLIO Honeywell offers a variety of board mount pressure sensors for potential use in medical and industrial applications. To view the entire product portfolio, click here. BASIC BOARD MOUNT PRESSURE SENSORS, ABP SERIES FIGURE 1. TOTAL ERROR BAND Total Error Band (TEB) is a single specification that includes all possible sources of error. TEB should not be confused with accuracy, which is actually a component of TEB. TEB is the worst error that the sensor could experience. The TEB specification on a datasheet may be confusing. Honeywell uses the TEB specification in its datasheet because it is the most comprehensive measurement of a sensor's true accuracy. Honeywell also provides the accuracy specification in order to provide a common comparison with competitors' literature that does not use the TEB specification. Many competitors do not use TEB--they simply specify the accuracy of their device. Their accuracy specification, however, may exclude certain parameters. On their datasheet, the errors are listed individually. When combined, the total error (or what would be TEB) can be significant. All Possible Errors Offset Full Scale Span Pressure Non-Linearity Pressure Hysteresis Pressure Non-Repeatibility Thermal Effect on Offset Thermal Effect on Span Thermal Hysteresis Total Error Band Accuracy BFSL TABLE 1. ABSOLUTE MAXIMUM RATINGS1 CHARACTERISTIC MIN. Supply voltage (Vsupply) Voltage on any pin Digital interface clock frequency: I2C SPI ESD susceptibility (human body model) Storage temperature MAX. UNIT -0.3 6.0 Vdc -0.3 Vsupply + 0.3 V 100 50 400 800 kHz 2 -- kV -40 [-40] 85 [185] C [F] Soldering time and temperature: lead solder temperature (DIP) 4 s max. at 250C [482F] peak reflow temperature (Leadless SMT, SMT) 15 s max. at 250C [482F] 1 Absolute maximum ratings are the extreme limits the device will withstand without damage. TABLE 2. ENVIRONMENTAL SPECIFICATIONS PARAMETER CHARACTERISTIC Humidity: all external surfaces internal surfaces of Liquid Media Option (T, V, B, C, F, G) internal surfaces of Dry Gases Option (N, D) Vibration 0 %RH to 95 %RH, non-condensing 0 %RH to 100 %RH, condensing 0 %RH to 95 %RH, non-condensing 15 g, 10 Hz to 2 kHz Shock 100 g, 6 ms duration Life 1 million pressure cycles minimum 1 J-STD-020-D.1 Moisture Sensitivity Level 1 (unlimited shelf life when stored at <30C/85 %RH) NSF-169, BPA Free, LFGB Solder reflow Certification (silicone gel coating option: Port 1 only) Life may vary depending on specific application in which the sensor is used. 1 TABLE 3. WETTED MATERIALS1 PRESSURE PORT 1 (P1) DRY GAS OPTION LIQUID MEDIA OPTION Ports and covers high temperature polyamide Metal gel ring -- 304 SST Substrate alumina ceramic -- Adhesives epoxy, silicone epoxy, silicone gel silicon, glass, gold, Electronic components -- aluminum 1 Contact Honeywell Customer Service for detailed material information. COMPONENT PRESSURE PORT 2 (P2) -- alumina ceramic epoxy, silicone silicon TABLE 4. SENSOR PRESSURE TYPES PRESSURE TYPE 2 DESCRIPTION Gage Output is proportional to the difference between applied pressure and atmospheric (ambient) pressure. Differential Output is proportional to the difference between the pressures applied to each port (Port 1 - Port 2). Sensing and Internet of Things BASIC BOARD MOUNT PRESSURE SENSORS, ABP SERIES TABLE 5. OPERATING SPECIFICATIONS ANALOG CHARACTERISTIC Supply voltage (Vsupply):1, 2, 3 3.3 Vdc 5.0 Vdc Supply current: 3.3 Vdc 5.0 Vdc sleep mode option Operating temperature range 4 Compensated temperature range5 Temperature output option DIGITAL UNIT MIN. TYP. MAX. MIN. TYP. MAX. 3.0 4.75 3.3 5.0 3.6 5.25 3.0 4.75 3.3 5.0 3.6 5.25 Vdc -- -- -- 2.1 2.7 -- 2.8 3.8 -- -- -- -- 3.1 3.7 1 3.9 4.6 10 mA mA A -40 [-40] -- 85 [185] -40 [-40] -- 85 [185] C [F] 0 [-32] -- 50 [122] 0 [-32] -- 50 [122] C [F] -- -- -- -- 4 -- C Startup time (power up to data ready) -- -- 5 -- -- 3 ms Response time -- 1 -- -- 0.46 -- ms -- 2.5 -- -- 97.5 -- -- -- -- -- -- -- %Vsupply -- -- -- -- -- -- -- 80 -- -- 20 -- %Vsupply Pull up on SDA/MISO, SCL/SCLK, SS -- -- -- 1 -- -- kOhm Total Error Band -- -- 1.5 -- -- 1.5 %FSS8 Accuracy -- -- 0.25 -- -- 0.25 %FSS BFSL -- -- 0.25 -- -- 0.25 %FSS 6 Clipping limit: upper lower I2C/SPI voltage level: low high 7 9 Long term stability (1000 hr, 25C [77F]) 0.03 -- -- -- -- -- %FSS Output resolution -- -- -- 12 -- -- bits 1 Sensors are either 3.3 Vdc or 5.0 Vdc based on the catalog listing selected. 2 Ratiometricity of the sensor (the ability of the device output to scale to the supply voltage) is achieved within the specified operating voltage. 3 The sensor is not reverse polarity protected. Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure. 4 Operating temperature range: The temperature range over which the sensor will produce an output proportional to pressure. 5 Compensated temperature range: The temperature range over which the sensor will produce an output proportional to pressure within the specified performance limits. 6 Temperature output option: Typical temperature output error over the compensated temperature range of 0C to 50C. Operation in Sleep Mode may affect temperature output error depending on duty cycle. 7 Total Error Band: The maximum deviation from the ideal transfer function over the entire compensated temperature and pressure range. Includes all errors due to offset, full scale span, pressure non-linearity, pressure hysteresis, repeatability, thermal effect on offset, thermal effect on span, and thermal hysteresis. 8 Full Scale Span (FSS): The algebraic difference between the output signal measured at the maximum (Pmax.) and minimum (Pmin.) limits of the pressure range. (See Figure 2.) 9 Accuracy: The maximum deviation in output from a Best Fit Straight Line (BFSL) fitted to the output measured over the pressure range at 25C [77F]. Includes all errors due to pressure non-linearity, pressure hysteresis, and non-repeatability. TABLE 6. SENSOR OUTPUT AT SIGNIFICANT PERCENTAGES (DIGITAL VERSIONS ONLY) % OUTPUT DIGITAL COUNTS DECIMAL HEX 0 0 0x0000 10 1638 0x0666 50 8192 0x2000 90 14746 0x399A 100 16383 0x3FFF Sensing and Internet of Things 3 BASIC BOARD MOUNT PRESSURE SENSORS, ABP SERIES FIGURE 2. TRANSFER FUNCTION LIMITS1 Output (%Vsupply) Analog Versions Compensated Pressure Range 100 90 80 70 60 Ideal 50 40 30 20 10 0 1.5% Total Error Band 0 Pmin. Output (V) = 1 2 3 4 5 6 7 8 9 Pressure (example unit) 0.8 x Vsupply Pmax. - Pmin. 10 Pmax. x (Pressureapplied - Pmin.) + 0.10 x Vsupply Output (% of 214 counts) Digital Versions Compensated Pressure Range 100 90 80 70 60 50 40 30 20 10 0 Ideal 1.5% Total Error Band 0 Pmin. 1 2 3 4 6 7 8 Pressure (example unit) Output (% of 214 counts) = 1 5 9 10 Pmax. 80% x (Pressureapplied - Pmin.) + 10% Pmax. - Pmin. Transfer Function "A" is shown. See Figure 3 for other available transfer functions. 4 Sensing and Internet of Things BASIC BOARD MOUNT PRESSURE SENSORS, ABP SERIES FIGURE 3. NOMENCLATURE AND ORDER GUIDE For example, ABPDNNN150PGAA3 defines an ABP Series Amplified Basic Pressure Sensor, DIP package, NN pressure port, dry gases only, no diagnostics, 150 psi gage pressure range, analog output type, 10% to 90% of Vsupply (analog), transfer function, no temperature output, no sleep mode, 3.3 Vdc supply voltage. ABP Product Series D NN N 150PG A A 3 Supply Voltage 3 5 ABP Amplified Basic Transfer Function3 Package No port 10% to 90% of 214 counts (digital only) D temperature output enabled, sleep mode enabled SMT DIP NN NN No port 5.0 Vdc 10% to 90% of Vsupply (analog), 214 counts (digital) A no temperature output, no sleep mode D DIP (Dual Inline Pin) M SMT (Surface Mount Technology) L Leadless SMT Pressure Port 3.3 Vdc 10% to 90% of 214 counts (digital only) S no temperature output, sleep mode enabled Leadless SMT NN 10% to 90% of 214 counts (digital only) T temperature output enabled, no sleep mode No port Output Type AN Single axial barbed port AN Single axial barbed port AN Analog SPI I2C, Address 0x08 I2C, Address 0x18 I2C, Address 0x28 A S 0 1 2 Single axial barbed port Pressure Range1, 2 60 mbar to 10 bar 6 kPa to 1 MPa Differential LN Single axial barbless port LN Single axial barbless port JN Single radial barbless port JN Single radial barbless port LN Single axial barbless port 060MD 100MD 160MD 250MD 400MD 600MD 001BD 1.6BD 2.5BD 004BD 60 mbar 100 mbar 160 mbar 250 mbar 400 mbar 600 mbar 1 bar 1.6 bar 2.5 bar 4 bar 060MG 100MG 160MG 250MG 400MG 600MG 001BG 1.6BG 2.5BG 004BG 006BG 010BG 0 mbar to 60 mbar 0 mbar to 100 mbar 0 mbar to 160 mbar 0 mbar to 250 mbar 0 bar to 400 mbar 0 bar to 600 mbar 0 bar to 1 bar 0 bar to 1.6 bar 0 bar to 2.5 bar 0 bar to 4 bar 0 bar to 6 bar 0 bar to 10 bar Differential 006KD 010KD 016KD 025KD 040KD 060KD 100KD 160KD 250KD 400KD 6 kPa 10 kPa 16 kPa 25 kPa 40 kPa 60 kPa 100 kPa 160 kPa 250 kPa 400 kPa 006KG 010KG 016KG 025KG 040KG 060KG 100KG 160KG 250KG 400KG 600KG 001GG 0 kPa to 6 kPa 0 kPa to 10 kPa 0 kPa to 16 kPa 0 kPa to 25 kPa 0 kPa to 40 kPa 0 kPa to 60 kPa 0 kPa to 100 kPa 0 kPa to 160 kPa 0 kPa to 250 kPa 0 kPa to 400 kPa 0 kPa to 600 kPa 0 kPa to 1 MPa Gage JJ Dual radial barbless ports, same side JJ Dual radial barbless ports, same side RN Single radial barbed port RN Single radial barbed port 3 4 5 6 7 I2C, Address 0x38 I2C, Address 0x48 I2C, Address 0x58 I2C, Address 0x68 I2C, Address 0x78 1 psi to 150 psi Differential 001PD 005PD 015PD 030PD 060PD 1 psi 5 psi 15 psi 30 psi 60 psi Gage Gage 001PG 005PG 015PG 030PG 060PG 100PG 150PG 0 psi to 1 psi 0 psi to 5 psi 0 psi to 15 psi 0 psi to 30 psi 0 psi to 60 psi 0 psi to 100 psi 0 psi to 150 psi Option RR Dual radial barbed ports, same side RR Dual radial barbed ports, same side N D T V B C F G Dry gases only, no diagnostics Dry gases only, diagnostics on Liquid media, no diagnostics Liquid media, diagnostics on Liquid media, food grade gel, no diagnostics4 Liquid media, food grade gel, diagnostics on4 Liquid media, fluorosilicone gel, no diagnostics4 Liquid media, fluorosilicone gel, diagnostics on4 Custom pressure ranges are available. Contact Honeywell Customer Service for more information. See the explanation of sensor pressure types in Table 4. 3 The Transfer Function limits define the output of the sensor at a given pressure input. By specifying Pmin. and Pmax., the output at Pmin. and Pmax., the complete transfer function of the sensor is defined. See the graphical representations of the transfer function in Figure 3. 4 Custom gel options are available. Contact Honeywell Customer Service for more information. 1 2 Sensing and Internet of Things 5 BASIC BOARD MOUNT PRESSURE SENSORS, ABP SERIES TABLE 7. PRESSURE RANGE SPECIFICATIONS PRESSURE PRESSURE RANGE RANGE PMAX. (SEE FIGURE 3.) PMIN. UNIT OVERPRESSURE1 PORT 1 (P1) PORT 2 (P2) PORT 2 (P2) COMMON MODE PRESSURE3 BURST PRESSURE2 PORT 1 (P1) 1 psi to 150 psi Differential 060MD -60 60 mbar 2000 850 3500 1000 10000 100MD -100 100 mbar 4000 1400 7000 2500 10000 160MD -160 160 mbar 4000 1400 7000 2500 10000 250MD -250 250 mbar 10000 2000 19000 4000 10000 400MD -400 400 mbar 10000 2000 19000 4000 10000 600MD -600 600 mbar 17000 2000 19000 4000 10000 001BD -1 1 bar 17 4 19 8 17 1.6BD -1.6 1.6 bar 17 8 19 16 17 2.5BD -2.5 2.5 bar 17 8 19 16 17 004BD -4.0 4.0 bar 17 16 19 19 17 -- -- -- -- -- -- -- -- -- -- -- -- 3500 -- -- -- -- -- -- -- -- -- -- -- -- Gage 060MG 0 60 mbar 2000 100MG 0 100 mbar 2000 160MG 0 160 mbar 2000 250MG 0 250 mbar 4000 400MG 0 400 mbar 10000 600MG 0 600 mbar 10000 001BG 0 1 bar 17 1.6BG 0 1.6 bar 17 2.5BG 0 2.5 bar 17 004BG 0 4 bar 17 006BG 0 6 bar 17 010BG 0 10 bar 17 3500 3500 7000 19000 19000 19 19 19 19 19 19 5500 10000 10000 10000 10000 10000 17 17 17 17 17 17 6 kPa to 1 MPa Differential 006KD -6 6 kPa 200 85 350 100 1000 010KD -10 10 kPa 400 140 700 250 1000 016KD -16 16 kPa 400 140 700 250 1000 025KD -25 25 kPa 1000 200 1900 400 1000 040KD -40 40 kPa 1000 200 1900 400 1000 060KD -60 60 kPa 1700 200 1900 400 1000 100KD -100 100 kPa 1700 400 1900 800 1700 160KD -160 160 kPa 1700 800 1900 1600 1700 250KD -250 250 kPa 1700 800 1900 1600 1700 400KD -400 400 kPa 1700 1600 1900 1900 1700 -- -- -- -- -- -- -- -- -- -- -- -- 350 -- -- -- -- -- -- -- -- -- -- -- -- Gage 6 006KG 0 6 kPa 200 010KG 0 10 kPa 200 016KG 0 16 kPa 200 025KG 0 25 kPa 400 040KG 0 40 kPa 1000 060KG 0 60 kPa 1000 100KG 0 100 kPa 1700 160KG 0 160 kPa 1700 250KG 0 250 kPa 1700 400KG 0 400 kPa 1700 600KG 0 600 kPa 1700 001GG 0 1 MPa 1.7 Sensing and Internet of Things 350 350 700 1900 1900 1900 1900 1900 1900 1900 1.9 550 1000 1000 1000 1000 1000 1700 1700 1700 1700 1700 1.7 BASIC BOARD MOUNT PRESSURE SENSORS, ABP SERIES TABLE 7. PRESSURE RANGE SPECIFICATIONS (CONTINUED) PRESSURE PRESSURE RANGE RANGE PMAX. (SEE FIGURE 3.) PMIN. UNIT OVERPRESSURE1 Port 1 (P1) Port 2 (P2) COMMON MODE PRESSURE3 BURST PRESSURE2 Port 2 (P2) Port 1 (P1) 1 psi to 150 psi Differential 001PD -1 1 psi 30 10 50 15 150 005PD -5 5 psi 150 30 275 40 150 015PD -15 15 psi 250 60 275 120 250 030PD -30 30 psi 250 120 275 240 250 060PD -60 60 psi 250 250 275 275 250 30 -- 50 -- 150 Gage 001PG 0 1 psi 005PG 015PG 0 5 psi 150 -- 275 -- 150 0 15 psi 250 -- 275 -- 250 030PG 0 30 psi 250 -- 275 -- 250 060PG 0 60 psi 250 -- 275 -- 250 100PG 0 100 psi 250 -- 275 -- 250 150PG 0 150 psi 250 -- 275 -- 250 Overpressure: The maximum pressure which may safely be applied to the product for it to remain in specification once pressure is returned to the operating pressure range. Exposure to higher pressures may cause permanent damage to the product. Unless otherwise specified this applies to all available pressure ports at any temperature with the operating temperature range. 1 2 Burst pressure: The maximum pressure that may be applied to the specified port (P1 or P2) of the product without causing escape of pressure media. Product should not be expected to function after exposure to any pressure beyond the burst pressure. 3 Common mode pressure: The maximum pressure that can be applied simultaneously to both ports of a differential pressure sensor without causing changes in specified performance. FIGURE 4. RECOMMENDED FILTER CAP VSUPPLY VSUPPLY 0.1 F VOUT* 0.001 F* Ground *Analog output version only. Sensing and Internet of Things 7 BASIC BOARD MOUNT PRESSURE SENSORS, ABP SERIES FIGURE 5. DIP PACKAGE DIMENSIONAL DRAWINGS (FOR REFERENCE ONLY: MM [IN].) DIP NN: No port 8,0 [0.32] 7,3 [0.29] 2,54 Typ. [0.100] 4,0 [0.16] 4 5 3,23 Wet media [0.127] 2,95 Dry media [0.116] 6 6 5 4 1 2 3 2X 1,45 [0.057] 5,5 [0.22] 6,3 [0.25] 3 2 11,0 [0.43] 11,5 [0.45] 1,0 [0.04] 1 0,25 Typ. [0.010] 8,6 [0.34] 3,81 [0.150] 6X 0,46 [0.018] DIP AN: Single axial barbed port 8,0 [0.32] 7,3 [0.29] 4,0 [0.16] 4 5 7,00 [0.276] 6 o1,91 [0.075] 5,5 [0.22] 6,3 [0.25] 2,54 Typ. [0.100] 3,63 Wet media [0.143] 3,35 Dry media [0.131] 3,56 [0.140] o2,74 [0.108] 6 5 2X 1,45 [0.057] 4 11,5 [0.45] 11,0 [0.43] o2,32 [0.091] 3 3,81 [0.150] 6X 0,46 [0.018] 8 Sensing and Internet of Things 2 1 1,0 [0.04] 8,6 [0.34] 0,25 Typ. [0.010] 1 2 3 BASIC BOARD MOUNT PRESSURE SENSORS, ABP SERIES FIGURE 5. DIP PACKAGE DIMENSIONAL DRAWINGS (CONTINUED) DIP LN: Single axial barbless port 8,0 [0.32] 7,3 [0.29] 4,0 [0.16] 4 5 2,54 Typ. [0.100] 3,23 Wet media [0.127] 2,95 Dry media [0.116] 4,80 [0.189] 6 6 5 4 2X 1,45 [0.057] 5,5 [0.22] 6,3 [0.25] 3 2 o5,00 2,68 [0.197] [0.106] 11,5 [0.45] 1,0 [0.04] 1 11,0 [0.43] 1 0,25 Typ. [0.010] 8,6 [0.34] 2 3 6X 0,46 [0.018] 3,81 [0.150] 6X 0,46 [0.018] DIP JN: Single radial barbless port 0,7 [0.03 4 5 3,38 Wet media [0.133] 3,10 Dry media [0.122] 6 6 5 8,0 [0.32] 4,65 [0.183] 4 2.16 [0.085] 4,45 [0.175] 11,5 [0.45] 6,3 [0.25] o1,88 [0.074] 11,0 [0.43] 0,25 Typ. [0.010] 3 7,3 [0.29] 2 1 1,0 [0.04] 8,6 [0.34] 1 2X 1,45 [0.057] 2 3 2,54 Typ. [0.100] 3,81 [0.150] 6X 0,46 [0.018] Sensing and Internet of Things 9 BASIC BOARD MOUNT PRESSURE SENSORS, ABP SERIES FIGURE 5. DIP PACKAGE DIMENSIONAL DRAWINGS (CONTINUED) DIP JJ: Dual radial barbless ports, same side 0,7 [0.03 4 2X 4,0 [0.16] 5 8,0 [0.32] 2,54 Typ. [0.100] 3,38 Wet media [0.133] 3,10 Dry media [0.122] 2,82 [0.111] 6 6 Port 1 5 2X 1,47 [0.058] 4 2X 4,65 [0.183] 4,45 [0.175] 6,3 [0.25] 2,10 [0.083] 11,0 [0.43] 11,5 [0.45] Port 1 2X o1,88 [0.074] Port 2 Port 2 3 7,3 [0.29] 2 1,0 [0.04] 1 4,45 [0.175] 1 0,25 Typ. [0.010] 8,6 [0.34] 2 5,06 Wet media [0.199] 3 4,78 Dry media [0.188] 3,81 [0.150] 6X 0,46 [0.018] DIP RN: Single radial barbed port 4,0 [0.16] 4 o1,60 [0.063] 0,5 [0.02] 5 8,0 [0.32] 2,54 Typ. [0.100] 6 5 4 3,58 Wet media [0.141] 3,30 Dry media [0.129] 6 3,10 [0.122] 4,55 [0.179] 6,3 [0.25] o1,75 o2,10 [0.083] 2,01 [0.079] 2X 1,47 [0.058] 11,5 [0.45] 11,0 [0.43] [0.069] 0,25 Typ. [0.010] 3 7,3 [0.29] 2 1 1 8,6 [0.34] 2 3 1,65 [0.065] 4,75 [0.187] 3,81 [0.150] 6X 0,46 [0.018] DIP RR: Dual radial barbed ports, same side 2X 4,0 [0.16] 4 5 3,58 Wet media [0.141] 3,30 Dry media [0.129] 6 2,78 [0.109] 8,0 [0.32] 2,54 Typ. [0.100] 2X 1.45 [0.057] 0,5 [0.02] Port 1 6,3 [0.25] 1,90 [0.075] 6 5 2X 4,75 [0.187] 4 2X o1,75 [0.069] 4,55 [0.179] Port 1 Port 2 11,5 11,0 [0.45] [0.43] 4,55 [0.179] Port 2 3 7,3 [0.29] 3,81 [0.150] 6X 0,46 [0.018] 10 Sensing and Internet of Things 2X o1,60 [0.063] 2 1 1.0 [0.04] 8,6 [0.34] 0,25 Typ. [0.010] 1 2 3 2X o2,10 [0.083] 4,76 [0.187] BASIC BOARD MOUNT PRESSURE SENSORS, ABP SERIES FIGURE 6. SMT PACKAGE DIMENSIONAL DRAWINGS (FOR REFERENCE ONLY: MM [IN].) SMT NN: No port 7,3 [0.29] 4,0 [0.16] 4 5 6 8.0 [0.32] 0,25 Typ. [0.010] 3,23 Wet media [0.127] 2,95 Dry media [0.116] 6 5 4 5,5 [0.22] 6,3 [0.25] 11,0 [0.43] 11,5 [0.45] 6X 1,28 [0.050] 3 SMT AN: Single axial barbed port 2 1,0 [0.04] 1 7,3 [0.29] 4,0 [0.16] 4 6X 0,46 [0.018] 4,2 [0.17] 7,00 [0.276] 5 1 2 3 2X 1,45 [0.057] 2,54 Typ. [0.100] 3,63 Wet media [0.143] 8.0 [0.32] 6 5 3,35 Dry media [0.131] 0,25 Typ. [0.010] 6 3,56 [0.140] 4 5,5 [0.22] 6,3 [0.25] o2,74 [0.108] [0.075] SMT LN: Single axial barbless port 2 4 1,0 [0.04] 1 7,3 [0.29] 4,0 [0.16] 5 6X 1,28 [0.050] o2,32 [0.091] o1,91 3 11,0 [0.43] 11,5 [0.45] 4,2 [0.17] 1 6X 0,46 [0.018] 3,23 Wet media [0.127] 2,95 Dry media [0.116] 0,25 Typ. [0.010] 4,80 [0.189] 6 6 2 3 2,54 Typ. [0.100] 8,0 [0.32] 5 2X 1,45 [0.057] 4 5,5 [0.22] 6,3 [0.25] o5,00 2,68 [0.197] [0.106] 11,0 [0.43] 11,5 [0.45] 6X 1,28 [0.050] 3 SMT JN: Single radial barbless port 4,65 [0.183] 2 1,0 [0.04] 1 4,0 [0.16] 4 4,2 [0.17] 8,0 [0.32] 2,54 Typ. [0.100] 6 5 3,38 Wet media [0.133] 5 3,10 Dry media [0.122] 6 0,7 [0.03] 1 6X 0,46 [0.018] 2 3 2,54 Typ. [0.100] 2X 1,45 [0.057] 2.16 [0.085] 1,47 [0.058] 4 4,45 [0.175] 6,3 [0.25] 1,88 [0.074] 3 2 7,3 [0.29] 1 11,5 [0.45] 1,0 [0.04] 4,2 [0.17] 0,25 Typ. [0.010] 11,0 [0.43] 6X 1,28 1 [0.050] 2 3 6X 0,46 [0.018] Sensing and Internet of Things 11 BASIC BOARD MOUNT PRESSURE SENSORS, ABP SERIES FIGURE 6. SMT PACKAGE DIMENSIONAL DRAWINGS (CONTINUED) SMT JJ: Dual radial barbless ports, same side 2X 4.65 [0.183] 4 5 6 8,0 [0.32] 2,54 Typ. [0.100] 2,82 [0.111] 3,38 Wet media [0.133] 3,10 Dry media [0.122] 0,7 [0.03] 2X 4.0 [0.16] 2X 1,45 [0.057] 6 5 5,06 Wet media [0.199] 4,78 Dry media [0.188] 4 4.45 [0.175] Port 1 2,10 [0.083] 6,3 [0.25] Port 2 Port 1 11,5 [0.45] 2X 1,88 [0.074] 11,0 [0.43] 4,45 [0.175] Port 2 3 2 7,3 [0.29] 1,0 [0.04] 1 4,2 [0.17] 0,25 Typ. [0.010] 1 6X 1,28 [0.050] 2 3 6X 0,46 [0.018] SMT RN: Single radial barbed port 4,0 [0.16] 4 o1,60 [0.063] 5 6 3,58 Wet media [0.141] 3,30 Dry media [0.129] 0,5 [0.02] 2X 1,45 [0.057] 8,0 [0.32] 2,54 Typ. [0.100] 6 2,01 [0.079] 4,75 [0.187] 5 4 o1,75 [0.069] 4,55 [0.179] 6,3 [0.25] 11,5 [0.45] o2,10 11,0 [0.43] [0.083] 3 2 1,0 [0.04] 1 7,3 [0.29] 4,2 [0.17] 0,25 Typ. [0.010] 6X 1,28 1 [0.050] 2 1.65 [0.065] 3 6X 0,46 [0.018] SMT RR: Dual radial barbed ports, both sides 2X 4.75 [0.187] 4 2X 4.0 [0.16] 5 6 3,10 [0.122] 1,90 [0.075] 2X 1,45 [0.057] 0,5 [0.02] Port 1 6,3 [0.25] 5 11,5 [0.45] Port 1 2 7,3 [0.29] 1 1,0 [0.04] 4,2 [0.17] 0,25 Typ. [0.010] 4,76 [0.187] 4 2X o1,60 [0.063] 2X o2,10 [0.083] 11,0 [0.43] Port 2 3 Sensing and Internet of Things 6 4,55 [0.179] Port 2 12 8,0 [0.32] 2,54 Typ. [0.100] 2,78 [0.109] 3,58 Wet media [0.141] 3,30 Dry media [0.129] 4,55 2X o1,75 [0.179] [0.069] 6X 1,28 [0.050] 1 2 3 6X 0,46 [0.018] BASIC BOARD MOUNT PRESSURE SENSORS, ABP SERIES FIGURE 7. LEADLESS SMT PACKAGE DIMENSIONAL DRAWINGS (FOR REFERENCE ONLY: MM [IN].) Leadless SMT NN: No port 4.0 [0.16] 2 1 3,23 Wet media [0.13] 3 3.5 [0.14] 5 4.0 [0.16] 2 1 7,0 6X 1,25 [0.28] [0.049] 1,0 [0.04] 7,0 [0.28] 3 3.5 [0.14] 3,63 Wet media [0.14] 3,35 Dry media [0.13] 6,3 o2,74 [0.25] [0.108] Leadless SMT LN: Single axial barbless port 1 4.0 [0.16] 2 1,5 [0.06] 2 1 7,0 6X 1,25 [0.28] [0.049] 4 2,5 Typ. [0.10] 4 5 6 8,0 [0.32] 3,23 Wet media [0.13] 3 1,0 [0.04] 2,95 Dry media [0.12] 3.5 [0.14] 6,3 [0.25] 6 3 o2,32 [0.091] [0.075] 7,3 [0.29] 6 3,00 [0.118] o1,91 5 5 8,0 [0.32] 3,56 [0.140] 6 1 4 2,5 Typ. [0.10] 4 7,3 [0.29] Leadless SMT AN: Single axial barbed port 2 3,00 [0.118] 6,3 [0.25] 6 3 1,0 [0.04] 2,95 Dry media [0.12] 5 7,3 [0.29] o2,68 [0.106] Port 1 2 1 3,00 [0.118] o5,0 [0.20] 4,1 [0.16] 4 3 0,7 [0.03] 1,5 [0.06] 7,0 6X 1,25 [0.28] [0.049] 4 2,5 Typ. [0.10] 5 6 8,0 [0.32] 1,5 [0.06] TABLE 8. PINOUTS OUTPUT TYPE I2C SPI analog PIN 1 GND GND GND PIN 2 Vsupply Vsupply NC PIN 3 INT SS Vout PIN 4 NC NC NC PIN 5 SDA MISO NC PIN 6 SCL SCLK Vsupply FIGURE 8. RECOMMENDED PCB LAYOUTS DIP SMT Gage reference hole: do not plug 1 2 3 Gage reference hole: do not plug 0,65 [0.026] 6X o0.73 [0.029] 1 6,00 [0.236] 11,25 [0.443] 6 2,73 [0.107] 2 5 1,30 [0.051] 8,85 [0.348] 11,00 [0.433] 5,00 [0.197] 12,35 [0.315] 6 5 4,00 [0.157] 3,00 [0.118] 2,73 [0.107] 2,54 [0.1] 8,00 [0.315] 1 2 3 6 5 4 7,00 3,25 [0.28] 0.128] 8,00 [0.315] 4 2,73 [0.107] 4 2,54 [0.1] 8,00 [0.315] Gage reference hole: do not plug 3 6,00 [0.236] 11,0 [0.433] 5,00 [0.197] Leadless SMT 2,50 [0.098] 8,00 [0.315] Sensing and Internet of Things 13 ADDITIONAL MATERIALS WARRANTY/REMEDY The following associated literature is available at sensing.honeywell.com: Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship during the applicable warranty period. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgment or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. * Product range guide * Installation instructions * Application note While Honeywell may provide application assistance personally, through our literature and the Honeywell web site, it is buyer's sole responsibility to determine the suitability of the product in the application. FOR MORE INFORMATION Honeywell Sensing and Internet of Things services its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or the nearest Authorized Distributor, visit sensing.honeywell.com or call: USA/Canada +1 302 613 4491 Latin America +1 305 805 8188 Europe +44 1344 238258 Japan +81 (0) 3-6730-7152 Singapore +65 6355 2828 Greater China +86 4006396841 Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this writing. However, Honeywell assumes no responsibility for its use. Honeywell Sensing and Internet of Things 830 East Arapaho Road Richardson, TX 75081 sensing.honeywell.com 32305128-G-EN | G | 07/20 (c) 2020 Honeywell International Inc. All rights reserved. m WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. m WARNING MISUSE OF DOCUMENTATION * * The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury.