54AC/74AC86 Quad 2-Input Exclusive-OR Gate General Description Features The 'AC86 contains four, 2-input exclusive-OR gates. Y Y Y Logic Symbol ICC reduced by 50% Outputs source/sink 24 mA Standard Military Drawing (SMD) 'AC86: 5962-89550 Connection Diagrams IEEE/IEC Pin Assignment for DIP, Flatpak and SOIC Pin Assignment for LCC TL/F/9909-3 TL/F/9909 - 2 TL/F/9909 - 1 Pin Names Description A0 - A3 B0 - B3 O0 - O3 Inputs Inputs Outputs FACTTM is a trademark of National Semiconductor Corporation. C1995 National Semiconductor Corporation TL/F/9909 RRD-B30M75/Printed in U. S. A. 54AC/74AC86 Quad 2-Input Exclusive-OR Gate February 1993 Absolute Maximum Ratings (Note 1) Recommended Operating Conditions If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage (VCC) 'AC Input Voltage (VI) b 0.5V to a 7.0V Supply Voltage (VCC) DC Input Diode Current (IIK) b 20 mA VI e 0.5V a 20 mA VI e VCC a 0.5V b 0.5V to VCC a 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) b 20 mA VO e b0.5V a 20 mA VO e VCC a 0.5V b 0.5V to VCC a 0.5V DC Output Voltage (VO) g 50 mA DC Output Source or Sink Current (IO) DC VCC or Ground Current g 50 mA Per Output Pin (ICC or IGND) b 65 C to a 150 C Storage Temperature (TSTG) Junction Temperature (TJ) CDIP 175 C PDIP 140 C 2.0V to 6.0V 0V to VCC 0V to VCC Output Voltage (VO) Operating Temperature (TA) 74AC 54AC b 40 C to a 85 C b 55 C to a 125 C Minimum Input Edge Rate (DV/Dt) 'AC Devices VIN from 30% to 70% of VCC VCC @ 3.3V, 4.5V, 5.5V 125 mV/ns Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT TM circuits outside databook specifications. DC Characteristics for 'AC Family Devices Symbol Parameter VCC (V) 74AC 54AC 74AC TA e 25 C TA e b 55 C to a 125 C TA e b 40 C to a 85 C Typ VIH VIL VOH Conditions Guaranteed Limits Minimum High Level Input Voltage 3.0 4.5 5.5 1.5 2.25 2.75 2.1 3.15 3.85 2.1 3.15 3.85 2.1 3.15 3.85 V VOUT e 0.1V or VCC b 0.1V Maximum Low Level Input Voltage 3.0 4.5 5.5 1.5 2.25 2.75 0.9 1.35 1.65 0.9 1.35 1.65 0.9 1.35 1.65 V VOUT e 0.1V or VCC b 0.1V Minimum High Level Output Voltage 3.0 4.5 5.5 2.99 4.49 5.49 2.9 4.4 5.4 2.9 4.4 5.4 2.9 4.4 5.4 V 2.56 3.86 4.86 2.4 3.7 4.7 2.46 3.76 4.76 V 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 V 0.36 0.36 0.36 0.50 0.50 0.50 0.44 0.44 0.44 3.0 4.5 5.5 VOL Units Maximum Low Level Output Voltage 3.0 4.5 5.5 3.0 4.5 5.5 0.002 0.001 0.001 *All outputs loaded; thresholds on input associated with output under test. 2 IOUT e b50 mA *VIN e VIL or VIH b 12 mA b 24 mA IOH b 24 mA IOUT e 50 mA V *VIN e VIL or VIH 12 mA IOL 24 mA 24 mA DC Characteristics for 'AC Family Devices (Continued) Symbol Parameter VCC (V) 74AC 54AC 74AC TA e 25 C TA e b 55 C to a 125 C TA e b 40 C to a 85 C Typ IIN Maximum Input Leakage Current IOZ Maximum TRI-STATEE IOLD Minimum Dynamic Output Current IOHD ICC Maximum Quiescent Supply Current 5.5 Units Conditions Guaranteed Limits g 0.1 g 1.0 g 1.0 mA VI e VCC, GND VI (OE) e VIL, VIH VO e VCC, GND 5.5 50 75 mA VOLD e 1.65V Max 5.5 b 50 b 75 mA VOHD e 3.85V Min 40.0 20.0 mA VIN e VCC or GND 5.5 2.0 Maximum test duration 20 ms, one output loaded at a time. Note: IIN and ICC @ ICC for 54AC 3.0V are guaranteed to be less than or equal to the respective limit @ 25 C is identical to 74AC @ @ 5.5V VCC. 25 C. AC Electrical Characteristics 74AC 54AC 74AC TA e a 25 C CL e 50 pF TA e b55 C to a 125 C CL e 50 pF TA e b40 C to a 85 C CL e 50 pF Parameter VCC* (V) Min Typ Max Min Max Min Max tPHL Propagation Delay Inputs to Outputs 3.3 5.0 2.0 1.5 6.0 4.5 11.5 8.5 1.0 1.0 14.0 10.0 1.5 1.0 12.5 9.5 ns tPLH Propagation Delay Inputs to Outputs 3.3 5.0 2.0 1.5 6.5 4.5 11.5 8.5 1.0 1.0 14.0 10.0 1.5 1.0 12.5 9.0 ns Symbol *Voltage Range 3.3V is 3.3V g 0.3V Voltage Range 5.0V is 5.0V g 0.5V Capacitance Typ Units Conditions CIN Symbol Input Capacitance Parameter 4.5 pF VCC e Open CPD Power Dissipation Capacitance 35 pF VCC e 5.0V 3 Units Ordering Information The device number is used to form part of a simplified purchasing code where the package type and temperature range are defined as follows: 74AC 86 P Temperature Range Family 74AC e Commercial 54AC e Military C QR Special Variations X e Devices shipped in 13x reels QR e Commercial grade device with burn-in QB e Military grade device with environmental and burn-in processing shipped in tubes Device Type Package Code P e Plastic DIP D e Ceramic DIP F e Flatpak L e Leadless Ceramic Chip Carrier (LCC) S e Small Outline (SOIC) Temperature Range C e Commercial (b40 C to a 85 C) M e Military (b55 C to a 125 C) Physical Dimensions inches (millimeters) 20-Terminal Ceramic Leadless Chip Carrier (L) NS Package Number E20A 4 Physical Dimensions inches (millimeters) (Continued) 14 Lead Ceramic Dual-In-Line Package (D) NS Package Number J14A 14 Lead Small Outline Integrated Circuit (S) NS Package Number M16A 5 54AC/74AC86 Quad 2-Input Exclusive-OR Gate Physical Dimensions inches (millimeters) (Continued) Lit. Y 114678 14 Lead Plastic Dual-In-Line Package (P) NS Package Number N14A 14 Lead Ceramic Flatpak (F) NS Package Number W14B LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 2900 Semiconductor Drive P.O. Box 58090 Santa Clara, CA 95052-8090 Tel: 1(800) 272-9959 TWX: (910) 339-9240 National Semiconductor GmbH Livry-Gargan-Str. 10 D-82256 F4urstenfeldbruck Germany Tel: (81-41) 35-0 Telex: 527649 Fax: (81-41) 35-1 National Semiconductor Japan Ltd. Sumitomo Chemical Engineering Center Bldg. 7F 1-7-1, Nakase, Mihama-Ku Chiba-City, Ciba Prefecture 261 Tel: (043) 299-2300 Fax: (043) 299-2500 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductores Do Brazil Ltda. Rue Deputado Lacorda Franco 120-3A Sao Paulo-SP Brazil 05418-000 Tel: (55-11) 212-5066 Telex: 391-1131931 NSBR BR Fax: (55-11) 212-1181 National Semiconductor (Australia) Pty, Ltd. Building 16 Business Park Drive Monash Business Park Nottinghill, Melbourne Victoria 3168 Australia Tel: (3) 558-9999 Fax: (3) 558-9998 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.