MBR16xx, MBRF16xx, MBRB16xx www.vishay.com Vishay General Semiconductor Schottky Barrier Rectifier FEATURES ITO-220AC TO-220AC 2 2 1 1 MBR16xx MBRF16xx PIN 1 PIN 1 CASE PIN 2 PIN 2 TO-263AB K * * * * * * * Power pack Guardring for overvoltage protection Low power loss, high efficiency Low forward voltage drop High forward surge capability High frequency operation Meets MSL level 1, per J-STD-020, LF maximum peak of 245 C (for TO-263AB package) * Solder bath temperature 275 C maximum, 10 s, per JESD 22-B106 (for TO-220AC and ITO-220AC package) * AEC-Q101 qualified available - Automotive ordering code: base P/NHE3_A * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 2 TYPICAL APPLICATIONS 1 MBRB16xx PIN 1 For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters, and polarity protection application. K PIN 2 HEATSINK MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 16 A VRRM 35 V to 60 V IFSM 150 A VF 0.57 V, 0.65 V TJ max. 150 C Package TO-220AC, ITO-220AC, TO-263AB Diode variations Single die Case: TO-220AC, ITO-220AC, TO-263AB Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified ("_X" denotes revision code, e.g. A, B, ...) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: as marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 C unless otherwise noted) SYMBOL MBR1635 MBR1645 MBR1660 Maximum repetitive peak reverse voltage VRRM 35 45 60 Working peak reverse voltage VRWM 35 45 60 Maximum DC blocking voltage VDC 35 45 60 Maximum average forward rectified current at TC = 125 C IF(AV) 16 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 150 Peak repetitive reverse current at tp = 2.0 s, 1 kHz IRRM Voltage rate of change (rated VR) dV/dt 10 000 TJ -65 to +150 Storage temperature range TSTG -65 to +175 Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min VAC 1500 PARAMETER Operating junction temperature range 1.0 UNIT V A 0.5 V/s C V Revision: 21-Nov-16 Document Number: 88671 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR16xx, MBRF16xx, MBRB16xx www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER SYMBOL Maximum instantaneous forward voltage VF (1) Maximum instantaneous reverse current at DC blocking voltage IR (1) MBR1635 TEST CONDITIONS MBR1645 MBR1660 IF = 16 A TC = 25 C 0.63 0.75 IF = 16 A TC = 125 C 0.57 0.65 TC = 25 C 0.2 1.0 TC = 125 C 40 50 Rated VR UNIT V mA Notes (1) Pulse test: 300 s pulse width, 1 % duty cycle (2) Pulse test: pulse width 40 ms THERMAL CHARACTERISTICS (TC = 25 C unless otherwise noted) PARAMETER Typical thermal resistance from junction to case SYMBOL MBR MBRF MBRB UNIT RJC 1.5 3.0 1.5 C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE Tube TO-220AC MBR1645-E3/45 1.80 45 50/tube ITO-220AC MBRF1645-E3/45 1.94 45 50/tube Tube TO-263AB MBRB1645-E3/45 1.33 45 50/tube Tube TO-263AB MBRB1645-E3/81 1.33 81 800/reel Tape and reel TO-220AC MBR1645HE3/45 (1) 1.80 45 50/tube Tube ITO-220AC MBRF1645HE3/45 (1) 1.94 45 50/tube Tube TO-263AB MBRB1645HE3/45 (1) 1.33 45 50/tube Tube TO-263AB MBRB1645HE3/81 (1) 1.33 81 800/reel Tape and reel TO-263AB MBRB1645HE3_A/P (1) 1.33 P 50/tube Tube TO-263AB MBRB1645HE3_A/I (1) 1.33 I 800/reel Tape and reel Note (1) AEC-Q101 qualified Revision: 21-Nov-16 Document Number: 88671 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR16xx, MBRF16xx, MBRB16xx www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TC = 25 C unless otherwise noted) 100 Instantaneous Reverse Current (mA) 20 Average Forward Current (A) Resistive or Inductive Load 16 12 8 4 0 TJ = 125 C 10 1 TJ = 75 C 0.1 TJ = 25 C 0.01 0.001 50 0 100 0 150 40 20 80 60 Case Temperature (C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics TJ = TJ Max. 8.3 ms Single Half Sine-Wave Junction Capacitance (pF) 125 100 75 50 25 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 1000 MBR1635, MBR1645 MBR1660 100 0 1 10 100 1 0.1 100 10 Number of Cycles at 60 Hz Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Junction Capacitance 100 100 Transient Thermal Impedance (C/W) Instantaneous Forward Current (A) 100 10 000 150 Peak Forward Surge Current (A) MBR1635, MBR1645 MBR1660 TJ = 150 C 10 Pulse Width = 300 s 1 % Duty Cycle 1 TJ = 25 C 0.1 MBR1635, MBR1645 MBR1660 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 10 1 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Revision: 21-Nov-16 Document Number: 88671 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR16xx, MBRF16xx, MBRB16xx www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AC ITO-220AC 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.635 (16.13) 0.625 (15.87) 1 PIN 0.350 (8.89) 0.330 (8.38) 0.671 (17.04) 0.651 (16.54) 0.600 (15.24) 0.580 (14.73) PIN 1 0.037 (0.94) 0.027 (0.68) TO-263AB 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.035 (0.89) 0.025 (0.64) Mounting Pad Layout 0.42 (10.66) MIN. 0.055 (1.40) 0.045 (1.14) 0.33 (8.38) MIN. 0.360 (9.14) 0.320 (8.13) K 2 0.624 (15.85) 0.591 (15.00) 0.055 (1.40) 0.047 (1.19) 0.670 (17.02) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) K 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.025 (0.64) 0.015 (0.38) 0.022 (0.56) 0.014 (0.36) 0.411 (10.45) 0.380 (9.65) 7 REF. 0.191 (4.85) 0.171 (4.35) CASE 0.205 (5.20) 0.195 (4.95) 7 REF. 2 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) PIN 1 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.350 (8.89) 0.330 (8.38) 0.110 (2.79) 0.100 (2.54) PIN 2 0.105 (2.67) 0.095 (2.41) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 1.148 (29.16) 1.118 (28.40) 2 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.603 (15.32) 0.573 (14.55) 7 REF. 0.076 (1.93) REF. 45 REF. 0.145 (3.68) 0.135 (3.43) 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) Revision: 21-Nov-16 Document Number: 88671 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000