TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173 Tel: 847-884-6664 Fax: 847-884-6665 E-mail: sales@tocos.com www.tocos.com
Specifications
Electrical
Standard Resistance Range . . . . . . . . . B = 500to 2M
A,C = 1kto 2M
Resistance Tolerance . . . . . . . . . . . . . . . . . 20% standard
End Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3max.
Resistance Taper . . . . B = linear; A = CW audio (logarithm);
C = CCW audio (logarithm)
Peak Noise (C.R.V.) . . . . . . . . . . . . . . . . . . . . . . . . 3% max.
Power Rating . . . . . . . 0.40 watt at40C, 0 watt at 80C
Maximum Input Voltage . . . . . B = 250VDC; A,C = 200VDC
or power rating, whichever is smaller
Insulation Resistance . . . . . . .100Mminimum at 500VDC
Wiper Current . . . . . . . . . . . . . . . . . 20mA max. at minimum
resistance value
Dielectric Strength . . . . . . . . . . . . . . . . . . 500VAC, 1 minute
Adjustment Travel . . . . . . . . . . . . . . . . . . . . . . . . . 245
10
Mechanical
Mechanical Travel . . . . . . . . . . . . . . . . . . . . . . . . . 290
10
Shaft Torque . . . . . . . . 30 to 200 gfcm (0.42 to 2.77 ozin)
Stop Strength . . . . . . . . . . . . . 9 kgfcm (124.76 ozin) min.
Mounting Nut Torque . . . . . . . 7 kgfcm (97.04 ozin) max.
Solderability . . . . . . . . . . . . . . . . . . . . . . 235C, 2.5 seconds
Marking . . . . . . . . . . . . . . . . . . Model type, taper, resistance,
shaft type, terminal identification, date code
Environmental
Temperature Range . . . . . . . . . . . . . . . . . . 10Cto
80C
Temperature Characteristics . . . . . . . . . . . 80C, 5 hours
without load
R )10 k T/R )6%
10 k !R )1MT/R )
10%
R 11MT/R )
15%
Load Life . . . . . . . . . . . . 40C, 1,000 hours with rated load
T/R )
15%
Moisture and Load Life . . . . . . . . . . . . 40C, 90-95%RH,
90 minutes on, 30 minutes off,
500 hours with rated load
T/R )10 %
~
15%
Vibration . . . . . . . . . . . . . . . . . . .10-55Hz, 1.5mm amplitude,
3 directions, 2 hours each
T/R )2.5%
Soldering Heat Resistance . . . . . . . . . . . 350C, 3 seconds
T/R )2%
Rotational Life . . . . . . . . . . . . . . .15,000 cycles without load
T/R )7%
R = Total Resistance Value; T/R = Total Resistance Change
RV20N2 Series
20mm Diameter, Single-Turn, Carbon Industrial Panel Controls
TOCOS®
PANEL CONTROLS
Features
20mm diameter, single-turn industrial panel controls Carbon film element Single unit, single shaft
Plastic 15mm standard shaft length Plastic 6mm diameter10mm knurled shaft for fingertip adjustment
Plastic M9P0.75 bushing Panel mounting style only Right angle lug terminals Linear or audio tapers
500to 2Mnominal resistance range Meets UL 94HB flammability requirements for plastic materials
RV20N2-15SK
30
TOCOS AMERICA, INC.
1177 East Tower Road, Schaumburg, IL 60173 Tel: 847-884-6664 Fax: 847-884-6665 E-mail: sales@tocos.com www.tocos.com
Unit: mm
Dimensions
RV20N2 Series
Part Numbering System
Resistance ()
500
Resistance ()
1,000
2,000
5,000
Resistance ()
10,000
20,000
50,000
Resistance ()
100,000
200,000
500,000
Resistance ()
1,000,000
2,000,000
Code
501
Code
102
202
502
Code
103
203
503
Code
104
204
504
Code
105
205
Standard Nominal Total Resistance Values and Part Numbering Codes
Standard Resistance Values and Part Numbering Codes
RV 20 103 MN2 SK B20
Resistance Tolerance: M =20% (standard).
Resistance Code: Expressed in ohms. A three digit code where the first
two digits are significant figures, and the third digit indicates the number
of zeros that follow these figures (i.e., 100 = 10;101=100; 102 = 1,000;
103 = 10,000; 105 = 1,000,000). See table for standard resistance values.
Resistance Taper: B = Linear.
A= CW Audio (logarithm).
C= CCW Audio (logarithm).
Shaft End Style: SK = Knurled and Slotted.
Standard Shaft Length: 15 = 15mm FMS.
Style: N2 = Panel Mount, Single Unit, Knurled Black Plastic Shaft,
Right Angle Ear-Lug Terminals.
Size: 20 = 20mm Diameter.
TOCOS Series Name: RV = Carbon Film Element.
Refer to Shaft End Styles Specifications and Hardware Specifications for details and availability.
For additional information, refer to Guidelines and Precautions for Using Panel Controls.
NOTE: FMS = From Mounting Surface
31
RV20N2
Panel Mount, Single Unit, Single Knurled Black Plastic Shaft
Right Angle Ear-Lug Terminals
Recommended
Panel Mounting Holes