Dimensions (Unit : mm) RPR-220PC30N Reflective photosensor (photoreflector) 2.8 6.4 Through hole 2.8 Absolute maximum ratings (Ta=25C) Unit 25 mA Reverse voltage VR 5 V PD 100 mW Collector-emitter voltage VCEO 30 V Emitter-collector voltage VECO 4.5 V Collector current IC 30 mA Collector power dissipation PC 80 mW Printers MFP (Multi-function Printer) 0.35 Features Operating temperature Topr -25 to +85 C Storage temperature Tstg -30 to +85 C 1) A plastic lens is used for high sensitivity. 2) A built-in visible light filter minimizes the influence of stray light. 3) Lightweight and compact. Typ. Output Input charac- characteristics teristics Unit Min. Forward voltage VF - 3.5 3.8 V Reverse current IR - - 100 A VR=5V ICEO - - 10 A VCE=10V Peak sensitivity wavelength P - 800 - nm Transfer characteristics Max. Symbol Collector current IC 0.08 - 0.8 mA VCE(sat) - 0.1 0.3 tr tf - 10 - Dark current Conditions 0.5 0.1 4- IF=20mA (2.5) (2.8) - Reflector VCE=2V, IF=10mA V IF=20mA, IC=0.1mA s VCE=10V, IF=20mA, RL=100 d = 6mm Collector-emitter saturation voltage Response time Infrared Photo light transistor emitter diode 4-0.6 2.95 0.5 Electrical and optical characteristics (Ta=25C) Parameter 4- 1.0 1.4 Power dissipation Applications 2.5 Limits IF 4.9 Symbol Forward current 6.5 Output (phototransistor ) Input (LED) Parameter 2- 2.2 Peak light emitting wavelength Response time Maximum sensitivity wavelength P - 470 - nm tr tf - 10 - s P - 800 - nm Reflective photointerrupter Anode Collector IF=20mA Non-coherent Infrared light emitting diode used. VCC=5V, IC=1mA, RL=100 This product is not designed to be protected against electromagnetic wave. Cathode Emitter - Reflector object : Standard white paper. (Reflection ratio = 90%) Notes: 1. Unspecified tolerance shall be 0.2 . 2. Dimension in parenthesis are show for reference. 1 0 5 10 15 10 5 -40 DISTANCE : d (mm) RELATIVE FORWARD VOLTAGE : VF (%) 110 PD 100 90 80 PC 70 60 50 40 30 20 10 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE : Ta (C) Fig.4 Power dissipation / collector power dissipation vs. ambient temperature 15 10 5 0 -20 0 20 40 60 80 0 100 1 2 3 4 5 0.7 1000 IF=20mA 0.6 0.5 IF=15mA 0.4 0.3 IF=10mA 0.2 IF=5mA 0.1 0 0 1 2 3 4 5 6 7 8 9 10 100 VCE=30V 20V 10V 10 1 0.1 0.01 -50 -25 0 25 50 75 100 AMBIENT TEMPERATURE : Ta (C) FORWARD VOLTAGE : VF (V) COLLECTOR-EMITTER VOLTAGE : VCE (V) AMBIENT TEMPERATURE : Ta (C) Fig.2 Forward current vs. ambient temperature Fig.3 Forward current vs. forward voltage Fig.7 Output characteristics Fig.8 Dark current vs. ambient temperature 0.8 120 100 80 60 40 20 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 AMBIENT TEMPERATURE : Ta (C) Fig.5 Relative output vs. ambient temperature 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 FORWARD CURRENT : IF(mA) Fig.6 Collector current vs. forward current 25 www.DataSheet4U.com POWER DISSIPATION / COLLECTOR POWER DISSIPTION : PD/PC (mW) Fig.1 Relative output vs. distance 20 DARK CURRENT : ICEO (A) 15 10000 0.8 COLLECTOR CURRENT : IC (mA) 20 0 20 120 FORWARD CURRENT : IF (mA) 25 COLLECTOR CURRENT : IC (mA) 10 0 25 30 100 FORWARD CURRENT : IF (mA) RELATIVE COLLECTOR CURRENT : IC (%) Electrical and optical characteristics curves www.DataSheet4U.com Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright (c) 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0