XPC/XPCL Series and XPXL Series Compensated/Calibrated and Uncompensated/Uncalibrated Board Mount Pressure Sensors DESCRIPTION The XPC/XPCL Series and XPXL Series sensors integrate On devices of 5 psi and above, the top side of the chip is silicon micromachined sensing technology, temperature protected against humidity by a Silgel(R) coating. compensation, and calibration in a complete family of low-cost packages. This series offers a cost-effective solution for design Although the sensors are designed for use with noncorrosive, requirements. nonionic pressure media, they accommodate many gases that are used in medical applications. These piezoresistive pressure sensors use micromachined silicon chips mounted on ceramic and protected with a plastic cap. Several tube arrangements with nylon housings are available for various pressure applications. FEATURES POTENTIAL APPLICATIONS Low cost, small size Medical applications Temperature compensated Applications requiring small size Zero and span calibrated Applications requiring vacuum and positive pressure Millivolt output reference or both Differential, gage and absolute pressure Constant voltage excitation High impedance - low current XPC/XPCL Series and XPXL Series Table 1. Electrical Specifications Characteristic XPC/XPCL at 12 Vdc, 25 C [77 F] Min. Typ. Max. 3.0 12.0 16.0 -1.0 0 1.0 Excitation voltage Null 1 Offset temperature shift - - 0 C to 25 C [32 F to 77 F] 25 C to 70 C [77 F to 158 F] 1 Full scale temperature shift - - 0 C to 25 C [32 F to 158 F] 25 C to 70 C [77 F to 158 F] 2 - 0.25 Linearity, hysteresis error Input resistance 5.0 - Output resistance - 3.0 Operating temperature -25 [-13] - Storage temperature -40 [-40] - Common mode pressure - - Notes: 1. Shift is relative to 25 C [77 F]. 2. Measured at 1/2 full scale rated pressure using BFSL. XPXL at 5 Vdc, 25 C [77 F] Min. Typ. Max. 3.0 5.0 12.0 -50 0 50 Unit Vdc mV 1.0 - 0.5 - mV 2 - -1800 PPM/ C - % span 1.0 - - 85 [185] 125 [257] 50 - - - -25 [-13] -40 [-40] - 0.25 3.0 3.0 - - - 1.0 - - 85 [185] 125 [257] 50 % span kOhm kOhm C [ F] C [ F] psi Table 2. Absolute Output FS Pressure 5 psi 15 psi 30 psi 60 psi 100 psi XPC at 12 Vdc, 25 C [77 F] Output Full Scale Span (mV) Min. Max. Max. 57 60 63 85 90 95 85 90 95 85 90 95 95 100 105 Overpressure (psi) Max. 15 45 90 180 250 1 Table 3. Gage/Differential Output FS Pressure XPC/XPCL at 12 Vdc, 25 C [77 F] Output Full Scale Span (mV) Min. Typ. Max. 4 inH2O 23 25 27 10 inH2O 19 20 21 1 psi 17 18 19 5 psi 57 60 63 15 psi 85 90 95 30 psi 85 90 95 60 psi 85 90 95 100 psi 95 100 105 150 psi 85 90 95 Note: 1. Differential common mode pressure should not exceed 50 psi. Figure 1. Mounting Dimensions (For reference only: mm (in).) D/A Housing GFS/AFS Housing (Differential/Absolute) (Gage/Absolute Offset Axial) 2 www.honeywell.com/sensing XPXL at 5 Vdc, 25 C [77 F] Output Full Scale Span (mV) Min. Typ. Max. 50 68 86 45 78.5 112 40 75 110 112 168.5 225 168 253 338 168 253 338 189 263.5 338 210 295 380 187 262.5 338 Overpressure (psi) Max. 3 3 3 15 45 90 180 250 250 GBFS Housing (Gage Backside Offset Axial) Compensated/Calibrated and Uncompensated/ Uncalibrated Board Mount Pressure Sensors Figure 1. Mounting Dimensions (continued) GF/AF Housing (Gage/Absolute Axial) DF Housing (Differential Axial) GBF Housing (Gage Backside Axial) GT/AT Housing (Gage/Absolute Radial) GBT Housing (Gage Backside Radial) DT Housing (Differential Radial) Honeywell Sensing and Control 3 Figure 2. Equivalent Circuit Pinout 1. -V Excitation 2. + Output Signal 3. +V Excitation 4. - Output Signal Order Guide Media compatibility: Clean, dry gases only. P1 Port: Media must be compatible with epoxy-based adhesive and silicon gel. P2 Port: Media must be compatible with nylon housing, epoxy-based adhesive and silicon. 1 XPCL 04 G B F C Series Accuracy Grade XPC - compensated and calibrated (psi) XPCL - compensated and calibrated (inH20) XPXL - uncompensated and uncalibrated (inH20) (XPC, XPCL only) C - Commercial H - High Accuracy Pressure Range Pressure Reference 04 inH20, 10 inH20 01, 05, 15, 30, 60, 100, 150 psi G - Gage D - Differential A - Absolute > 5 psi Port Option 2 Port Operation B - Backside F - Axial T - Radial FS - Offset Axial2 Notes: 1. Not all combinations may be available. Contact Honeywell representative for details. 2. Option available in ported gage version only. WARNING WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. MISUSE OF DOCUMENTATION The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. SALES AND SERVICE Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: info.sc@honeywell.com Internet: www.honeywell.com/sensing Phone and Fax: Asia Pacific +65 6355-2828 +65 6445-3033 Fax Europe +44 (0) 1698 481481 +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax USA/Canada +1-800-537-6945 +1-815-235-6847 +1-815-235-6545 Fax Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 www.honeywell.com/sensing 008046-6-EN IL50 GLO Printed in USA July 2011 (c) 2011 Honeywell International Inc. All rights reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Honeywell: XPC150GTC XPC01GTH