SXE15-48D05-3V3-R - Artesyn Embedded Technologies

DC/DC CONVERTERS 15W High Efficiency DC/DC Converters 1

2 YEAR WARRANTY

SXE15 Series

Dual positive output

•Two positive outputs

•Output voltage tracking

•High efficiency

•Approved to EN60950, UL/cUL1950

•Wide operating temperature, up to and exceeding 65ºC

(natural convection)

•Up to 100% load imbalance

•Trim function

•No minimum load

•Complies with ETS 300 019-1-3/2-3

•Fully compliant with ETS 300 386-1

The SXE15 is a new high efficiency open frame isolated 15 Watt converter series. The first

two models in the series feature an input voltage range of 33 to 75VDC and are available in

output voltages of 5V/3.3V and 3.3V/2.5V. The output voltage on each model is adjustable

from 90% to 110% of the nominal value. Typical efficiencies for the models are 86% for the

5V/3.3V and 85% for the 3.3V/2.5V version. The SXE15 series also has a remote on/off

capability, with active high or active low logic. Overcurrent and overvoltage protection

features are included as standard. With full international safety approval including EN60950

and cUL1950, the SXE15 reduces compliance costs and time to market.

All specifications are typical at nominal input, full load at 25°C unless otherwise stated

EMC CHARACTERISTICS

ETS 300 386-1 table 5

Conducted emissions

EN55022 (See Note 6)

Level A

EN55022 (See Note 6)

Level B

Radiated emissions

EN55022 (see Longform data sheet)

Level B

Immunity:

ESD air EN61000-4-2 8kV, 15kV

ESD contact EN61000-4-2 6kV, 8kV

EFT DC power EN61000-4-4 2kV, 4kV

EFT signal EN61000-4-4 1kV, 2kV

Radiated field enclosure EN61000-4-3 10V/m

Surges indoor signal EN61000-4-5 500V

Conducted (DC power) EN61000-4-6 10V

Conducted (signal) EN61000-4-6 10V (See Note 7)

Input transients ETS 300 132-2, ETR 283

GENERAL SPECIFICATIONS

Efficiency See table

Operational insulation Input/output 1500VDC

Input fuse 2.0A slow blow

Switching frequency Fixed 265kHz

Approvals and UL/cUL 1950, EN60950

standards TÜV Rheinland

(See Notes 1, 2 and 3)

Weight 12g (0.42oz)

MTBF MIL-HDBK-217F >600,000 hours

Representative model: 48S05 @ 48Vin, 40°C,

100% load ground benign

BELLCORE 332 >1,500,000 hours

ENVIRONMENTAL SPECIFICATIONS

Thermal performance Operating ambient -40°C to +65°C,

(See Note 5) temperature

Non-operating -40°C to +120°C

OUTPUT SPECIFICATIONS

Voltage adjustability Both outputs ±10% min.

Voltage setpoint Both outputs ±2% typ.

Voltage accuracy Both outputs ±4% max.

(See Note 8)

Output voltage 5V/3.3V 4.931V < Vo1 < 5.133V

(over all line and 3.236V < Vo2 < 3.368V

load conditions) 3.3V/2.5V 3.297V < Vo1 < 3.431V

2.431V < Vo2 < 2.531V

Minimum load 0%

Ripple and noise 140mV pk-pk max.

20MHz bandwidth 50mV rms max.

Transient response D05-3V3, V01 180mV max.

50% to 75% to 50% D05-3V3, V02 100mVmax.

D3V3-2V5, V01 150mV max.

D3V3-2V5, V02 100mV max.

Peak dev. settling time To 1.0%, no external cap. 100µs

Short circuit protection 10A rms Continuous

(Isc) automatic recovery

Tracking Max. differential 0.7V during

start-up

INPUT SPECIFICATIONS

Input voltage range 48Vin nominal 33 to 75VDC

Input current No load 35mA max.

Remote OFF 25mA max.

UVLO turn ON voltage 33V (typ)

UVLO turn OFF voltage 30V (typ)

Active high remote ON/OFF (See Note 4)

Logic compatibility Open collector ref. to -input

ON Open circuit or >2VDC

OFF <1.2VDC

Start-up time Nominal line 2.5ms (typ)

SPECIFICATIONS

TÜV

File Name: sxe15d.pdf Rev: 23 Dec 2003

Data Sheet © Artesyn Technologies

2003

The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising

from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent

accompany the sale of any such product(s) or information contained herein.

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

Notes

1User must provide recommended fuses in order to comply with safety

approvals.

2Maximum continuous output power.

15 Watts for D05-3V3 model.

11.55 Watts for D3V3-2V5 model.

3Maximum temperature on hot spots not to exceed 115°C.

Refer to Longform data sheet for details.

4Active low remote on/off is available. Standard product is active high.

Designate with the suffix ‘-R’, e.g. SXE15-48D05-3V3-R.

5Operating ambient temperatures are specified at natural convection.

Higher operating temperatures with increased airflow.

See Application Note 116 for further details.

6Measured with external filter. See Application Note 116 for further details.

7Signal line assumed <3m in length.

8This parameter is calculated at worst case line, load, temperature and initial

conditions.

PIN CONNECTIONS

PIN NUMBER FEATURE

o1 (+)

2Com

o2 (+)

4Trim

5N/C

6N/C

7N/C

8On/Off

9N/C

10 N/C

11 Vin -

12 Vin +

SXE15 Series

Dual positive output

DC/DC CONVERTERS 15W High Efficiency DC/DC Converters 2

Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com

CAUTION: Hazardous internal voltages

and high temperatures. Ensure that unit is

not user accessible.

Tolerence: ±.015 (±.38)

Recommended Land & Hole Pattern

1.575 (40.01)

0.197 (5.00)

0.394 (10.01)

ø0.063 (ø1.60) 1.200 (30.48)

0.161 (4.09)

0.125 (3.18)

1.812 (46.02)

0.130 (3.30)

0.047 (1.18)

1.812 (46.02)

1.575 (40.01)

1.885 (47.88)

0.070 (1.78) MAX

1.812 (46.03)

0.335 (8.51) MAX

0.010 (0.25) MIN

1.905 (48.39)

1.390 (35.31)

1.150 (29.21)

leadframe length

overall length

BOTTOM VIEW

SIDE VIEW

TOP VIEW

ø.050 (ø1.27)

Non-Skid Retaining Pins,

2 Places 1

0.477 (12.11) 0.502 (12.75)

0.053 (1.36)

All Dimensions in Inches [mm]

0.069 (1.74)

0.197 (5.00)

0.394 (10.01)

1.181 (30.00)

1.378 (35.00)

0.100 (2.54)

12 places

0.063 (1.60)

0.053 (1.36)

1.181 (30.00)

1.378 (35.00)

International Safety Standard Approvals

UL/cUL 1950 3rd edition. File No. E135734

TÜV TÜV Rheinland. Certificate No. R2074133

INPUT OUTPUT VOLTAGE OUTPUT CURRENT OVP TYPICAL MODEL

VOLTAGE 1 2 1 2 1 2 EFFICIENCY NUMBER (4)

33-75VDC 5V 3.3V 3.0A 4.5A 6.2V 4.2V 86% SXE15-48D05-3V3

33-75VDC 3.3V 2.5V 3.5A 4.5A 4.0V 3.0V 85% SXE15-48D3V3-2V5

File Name: sxe15d.pdf Rev: 23 Dec 2003