Thermofit Molded Parts Part Number : 202D1XX25/225 Specification Control Drawing Description : Boot, Straight, With Lips Limited Distribution NOTES . P 1. All dimensions are in Wehes_ COATING (SEE NOTE 3) [millimeters] LN R . . as s_ s JO = 2. Dimensions appearing in table are as follows 3 v4 N\ l a As Supplied a Ne | b - After Unrestricted Recovery H DIA _ J DIA H DIA | _ J DIA 3. Coating is optional. As supplied i a dimensions appearing in table are f W TYP. for uncoated parts. When coating is added, entry diameters will be T reduced by .06 max. heey have 2 pe AS SUPPLIED AFTER UNRESTRICTED RECOVERY TABLE OF DIMENSIONS PART H J P R Ss T JO Ww NUMBER Min Max Min Max | +10% | Ref Ref Ref | +10% | 420% a b q b b b b b b b 92 41 -92 .22 1.50 -83 12 .04 .40 .07 202012125/225) 1957 | i081 | (23.81 | (se) | C361] [C2117 | cso) | cto] |rio2) |ci.7el 1.12 .56 1.12 .26 2.16 1.09 12 .04 .65 .O7 202013225/225) 98.47 | 14.3] | [28.4] | (66) | C540] |(27.71 | C30) | f1.07 |f1es] |[i.78] 1.22 .70 1.22 28 2.63 1.39 12 04 .70 .08 2020142-25/225| ry oy | ize] |{31.0] | [7.21 | t66.e] |(35.3) | 3.0) | C10) |t1z8I | [2031 1.42 .88 1.42 33 3.15 1.63 12 .04 .82 .08 2020185" 25/225! rse,0] | taal | f36.0] | te.4] | fe0.0] [tata] | (3.01 | (1.0) |tzoe) |t2.031 1.68 4.11 1.68 .39 4.08 2.22 12 .065 -97 .o98 202D16325/225} (4o77 | (282) | (42.71 | fee] |c103.6]|f56.4] | (3.0) |i1.e5] |(2ae] | 12.291 2.04 1.38 2.04 .62 5.13, 2.54 12 .065 1.56 13 202D17425/225 (51,8) |[35,1] | (518) | (15,8) |(130,3]|[64.5] | [3.0] |[1.65] | [39,6] | [3,3] 2.60 1.75 2.60 .80 6.50 3.31 12 .08 1.90 16 202D185-25/225| ree.o7 | (44.81 | [66,0] | (20.4) |C1e5.11|C841] | (3.0) | (2.0) | (483) | [+06] 3.22 2.27 3.22 1.00 7.00 3.75 12 .08 1.88 16 Raychem 202D196-25/225| ray 77 | ts7.e] |ten7] | C254) |C177.81|(95.3) | 3.0) | (20) | C476) | [406] Reo oR NONE Revision: B Part Number : 202D1XX25/225 MENLO PARK, CALIFORNIA 94025 Date: 4/21/99 Description : Boot, Straight, With Lips Thermofit Molded Parts Part Number: 202D1XX25/225 Specification Control Drawing Description : Boot, Straight, With Lips Limited Distribution COMPATABILITY CHART MATERIAL DASH NO. MATERIAL DESCRIPTION RT SPEC | COATING SLASH NO. COATING $ NO. COATING DESCRIPTION -25 Elastomer, Fluid Resistant RT-1325 /225 $-1206 Adhesive [| ORDERING INFORMATION | 202D1XX -25 -XX /225 Base part number Material dash number _ | (See Compatability Chart) Modification number (lf necessary, see front of scd binder or a complete list Adhesive slash number (If necessary, see Compatability Chart) THIS DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE; CONSULT YOUR NEAREST FIELD REPRESENTATIVE FOR CURRENT REVISION Raychem RAYCHEM CORPORATION Foton = 300 CONSTITUTION DRIVE Revision: B MENLO PARK, CALIFORNIA 94025 Date: 4/21/99 Part Number : Description : 202D1XX25/225 Boot, Straight, With Lips CAD FILE MP99083