https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Feed-through terminal block, nom. voltage: 500 V, nominal current: 17.5 A, connection method: Spring-cage connection, number of connections: 3, cross section: 0.08 mm - 1.5 mm, AWG: 28 - 16, width: 4.2 mm, color: white, mounting type: NS 35/7,5, NS 35/15 Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4017918599669 Weight per Piece (excluding packing) 6.620 g Custom tariff number 85369010 Country of origin Germany Technical data General Number of levels 1 Number of connections 3 Potentials 1 Nominal cross section 1.5 mm Color white Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Overvoltage category III Insulating material group I 05/13/2019 Page 1 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Technical data General Maximum power dissipation for nominal condition 0.56 W Maximum load current 17.5 A (in case of a 1.5 mm conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.) Nominal current IN 17.5 A (with 1.5 mm conductor cross section) Nominal voltage UN 500 V Open side panel Yes Dimensions Width 4.2 mm Length 60.5 mm Height NS 35/7,5 36.5 mm Height NS 35/15 44 mm Connection data Connection method Spring-cage connection Stripping length 8 mm ... 10 mm Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.08 mm Conductor cross section solid max. 1.5 mm Conductor cross section AWG min. 28 Conductor cross section AWG max. 16 Conductor cross section flexible min. 0.08 mm Conductor cross section flexible max. 1.5 mm Min. AWG conductor cross section, flexible 28 Max. AWG conductor cross section, flexible 16 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm sleeve, max. Connection in acc. with standard IEC/EN 60079-7 Conductor cross section solid min. 0.08 mm Conductor cross section solid max. 1.5 mm Conductor cross section AWG min. 28 Conductor cross section AWG max. 16 Conductor cross section flexible min. 0.08 mm Conductor cross section flexible max. 1.5 mm 05/13/2019 Page 2 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Technical data Connection data Internal cylindrical gage A1 Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141121 eCl@ss 4.1 27141121 eCl@ss 5.0 27141120 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 05/13/2019 Page 3 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Classifications UNSPSC UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals DNV GL / CSA / BV / LR / NK / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Gutachten mit Fertigungsuberwachung / EAC / RS / cULus Recognized Ex Approvals IECEx / ATEX / EAC Ex Approval details DNV GL http://exchange.dnv.com/tari/ TAE00001CS CSA http://www.csagroup.org/services-industries/product-listing/ 13631 B C Nominal voltage UN 300 V 300 V Nominal current IN 15 A 15 A mm/AWG/kcmil 26-14 26-14 BV http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials 13403/B0 BV LR http://www.lr.org/en 04/20034 05/13/2019 Page 4 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Approvals NK http://www.classnk.or.jp/hp/en/ 09 ME 140 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425 B C Nominal voltage UN 300 V 300 V Nominal current IN 15 A 15 A mm/AWG/kcmil 26-14 26-14 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm B C Nominal voltage UN 300 V 300 V Nominal current IN 15 A 15 A mm/AWG/kcmil 26-14 26-14 IECEE CB Scheme http://www.iecee.org/ Nominal voltage UN 500 V mm/AWG/kcmil 1.5 VDE Gutachten mit Fertigungsuberwachung http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx Nominal voltage UN 500 V Nominal current IN 17.5 A mm/AWG/kcmil 1.5 EAC FILE E 60425 DE1-51360 40009031 RU CDE.A*30.B.01742 05/13/2019 Page 5 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Approvals RS cULus Recognized http://www.rs-head.spb.ru/en/index.php 17.00013.272 Accessories Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver 05/13/2019 Page 6 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored 05/13/2019 Page 7 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5 DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver 05/13/2019 Page 8 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15 05/13/2019 Page 9 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver Documentation Mounting material - ST-IL - 3039900 Operating decal for the ST terminal block End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray 05/13/2019 Page 10 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories End clamp - E/UK - 1201442 End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray End cover End cover - D-ST 2,5-TWIN - 3030488 End cover, length: 60.5 mm, width: 2.2 mm, height: 29 mm, color: gray Cover segment - DS-ST 2,5 - 3036602 End cover segments, large segment: 32.25 x 13.83 x 0.9, small segment: 22.65 x 11.65 x 0.9, color: gray End cover - D-ST 2,5-TWIN-0,8 OG - 3030512 End cover, length: 60.5 mm, width: 0.8 mm, height: 29 mm, color: orange 05/13/2019 Page 11 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green 05/13/2019 Page 12 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black Insulating sleeve - ISH 1,5/0,2 - 3206131 Insulating sleeve, color: white Insulating sleeve - ISH 1,5/0,5 - 3031034 Insulating sleeve, color: gray Jumper Plug-in bridge - FBS 2-4 - 3030116 Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: red 05/13/2019 Page 13 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories Plug-in bridge - FBS 3-4 - 3030129 Plug-in bridge, pitch: 4.2 mm, number of positions: 3, color: red Plug-in bridge - FBS 4-4 - 3030132 Plug-in bridge, pitch: 4.2 mm, number of positions: 4, color: red Plug-in bridge - FBS 5-4 - 3030145 Plug-in bridge, pitch: 4.2 mm, number of positions: 5, color: red Plug-in bridge - FBS 10-4 - 3030158 Plug-in bridge, pitch: 4.2 mm, number of positions: 10, color: red Plug-in bridge - FBS 20-4 - 3030352 Plug-in bridge, pitch: 4.2 mm, number of positions: 20, color: red 05/13/2019 Page 14 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories Plug-in bridge - FBS 2-4 BU - 3030117 Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: blue Plug-in bridge - FBS 3-4 BU - 3030130 Plug-in bridge, pitch: 4.2 mm, number of positions: 3, color: blue Plug-in bridge - FBS 4-4 BU - 3030133 Plug-in bridge, pitch: 4.2 mm, number of positions: 4, color: blue Plug-in bridge - FBS 5-4 BU - 3030146 Plug-in bridge, pitch: 4.2 mm, number of positions: 5, color: blue Plug-in bridge - FBS 10-4 BU - 3036851 Plug-in bridge, pitch: 4.2 mm, number of positions: 10, color: blue 05/13/2019 Page 15 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories Plug-in bridge - FBS 20-4 BU - 3030353 Plug-in bridge, pitch: 4.2 mm, number of positions: 20, color: blue Plug-in bridge - FBS 2-4 GY - 3030118 Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: gray Plug-in bridge - FBS 3-4 GY - 3030131 Plug-in bridge, pitch: 4.2 mm, number of positions: 3, color: gray Plug-in bridge - FBS 4-4 GY - 3030134 Plug-in bridge, pitch: 4.2 mm, number of positions: 4, color: gray Plug-in bridge - FBS 5-4 GY - 3030147 Plug-in bridge, pitch: 4.2 mm, number of positions: 5, color: gray Labeled terminal marker 05/13/2019 Page 16 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories Zack marker strip - ZB 4 CUS - 0824951 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 10.5 mm Zack marker strip - ZB 4,LGS:FORTL.ZAHLEN - 0805739 Zack marker strip - ZB 4,QR:FORTL.ZAHLEN - 0805807 Zack marker strip, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 10.5 mm Marker for terminal blocks - UC-TM 4 CUS - 0824573 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 10.5 mm Marker for terminal blocks - UCT-TM 4 CUS - 0829588 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 10.5 mm 05/13/2019 Page 17 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories Zack Marker strip, flat - ZBF 4 CUS - 0825023 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 5.2 mm Zack Marker strip, flat - ZBF 4,LGS:FORTL.ZAHLEN - 0808626 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm Zack Marker strip, flat - ZBF 4,QR:FORTL.ZAHLEN - 0808820 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm Zack Marker strip, flat - ZBF 4,LGS:GERADE ZAHLEN - 0810818 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ... 100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 5.15 x 4.15 mm Zack Marker strip, flat - ZBF 4,LGS:UNGERADE ZAHLEN - 0810850 Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 5.15 x 4.15 mm 05/13/2019 Page 18 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories Marker for terminal blocks - UC-TMF 4 CUS - 0824630 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 5.1 mm Marker for terminal blocks - UCT-TMF 4 CUS - 0829651 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.4 x 4.7 mm Marker pen Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm Partition plate Partition plate - ATP-ST-TWIN - 3030789 Partition plate, length: 75.2 mm, width: 2 mm, height: 39 mm, color: gray 05/13/2019 Page 19 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories Spacer plate - DP PS-4 - 3036712 Spacer plate, length: 22.4 mm, width: 4.2 mm, height: 29 mm, number of positions: 1, color: red Screwdriver tools Screwdriver - SZF 0-0,4X2,5 - 1204504 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2component grip, with non-slip grip Terminal marking Zack marker strip - ZB 4 :UNBEDRUCKT - 0805001 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 10.5 mm Marker for terminal blocks - UC-TM 4 - 0818111 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 10.5 mm 05/13/2019 Page 20 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories Marker for terminal blocks - UCT-TM 4 - 0828732 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 10.5 mm Zack Marker strip, flat - ZBF 4:UNBEDRUCKT - 0808587 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm Marker for terminal blocks - UC-TMF 4 - 0818166 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 5.1 mm Marker for terminal blocks - UCT-TMF 4 - 0828742 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.4 x 4.7 mm Test plug terminal block Reducing plug - RPS - 0201647 Reducing plug, color: gray 05/13/2019 Page 21 / 22 https://www.phoenixcontact.com/us/products/3037290 Feed-through terminal block - ST 1,5-TWIN WH - 3037290 Accessories Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm conductor cross section, color: gray Test plugs - PS-4 - 3030970 Test plugs, color: red Test socket Test adapter - PAI-4 - 3030925 Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm ... 8.2 mm pitch, color: gray Phoenix Contact 2019 (c) - all rights reserved http://www.phoenixcontact.com 05/13/2019 Page 22 / 22