https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page1/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, nom. voltage: 500 V, nominal current: 17.5 A, connection method: Spring-cage
connection, number of connections: 3, cross section: 0.08 mm²-1.5 mm², AWG:28-16, width: 4.2 mm, color:
white, mounting type: NS 35/7,5, NS 35/15
Key Commercial Data
Packing unit 1 pc
Minimum order quantity 50 pc
GTIN
GTIN 4017918599669
Weight per Piece (excluding packing) 6.620 g
Custom tariff number 85369010
Country of origin Germany
Technical data
General
Number of levels 1
Number of connections 3
Potentials 1
Nominal cross section 1.5 mm²
Color white
Insulating material PA
Flammability rating according to UL 94 V0
Rated surge voltage 6 kV
Overvoltage category III
Insulating material group I
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page2/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Technical data
General
Maximum power dissipation for nominal condition 0.56 W
Maximum load current
17.5 A (in case of a 1.5 mm² conductor cross section, the maximum
load current must not be exceeded by the total current of all connected
conductors.)
Nominal current IN17.5 A (with 1.5 mm² conductor cross section)
Nominal voltage UN500 V
Open side panel Yes
Dimensions
Width 4.2 mm
Length 60.5 mm
Height NS 35/7,5 36.5 mm
Height NS 35/15 44 mm
Connection data
Connection method Spring-cage connection
Stripping length 8 mm ... 10 mm
Connection in acc. with standard IEC60947-7-1
Conductor cross section solid min. 0.08 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section AWG min. 28
Conductor cross section AWG max. 16
Conductor cross section flexible min. 0.08 mm²
Conductor cross section flexible max. 1.5 mm²
Min. AWG conductor cross section, flexible 28
Max. AWG conductor cross section, flexible 16
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, max. 0.5 mm²
Connection in acc. with standard IEC/EN60079-7
Conductor cross section solid min. 0.08 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section AWG min. 28
Conductor cross section AWG max. 16
Conductor cross section flexible min. 0.08 mm²
Conductor cross section flexible max. 1.5 mm²
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page3/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Technical data
Connection data
Internal cylindrical gage A1
Standards and Regulations
Connection in acc. with standard CSA
IEC60947-7-1
Flammability rating according to UL 94 V0
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0 27141121
eCl@ss 4.1 27141121
eCl@ss 5.0 27141120
eCl@ss 5.1 27141100
eCl@ss 6.0 27141100
eCl@ss 7.0 27141120
eCl@ss 8.0 27141120
eCl@ss 9.0 27141120
ETIM
ETIM 2.0 EC000897
ETIM 3.0 EC000897
ETIM 4.0 EC000897
ETIM 5.0 EC000897
ETIM 6.0 EC000897
ETIM 7.0 EC000897
UNSPSC
UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page4/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Classifications
UNSPSC
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
Approvals
Approvals
Approvals
DNV GL / CSA / BV / LR / NK / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Gutachten mit Fertigungsüberwachung / EAC / RS /
cULus Recognized
Ex Approvals
IECEx / ATEX / EAC Ex
Approval details
DNV GL http://exchange.dnv.com/tari/ TAE00001CS
CSA http://www.csagroup.org/services-industries/product-listing/ 13631
B C
Nominal voltage UN 300 V 300 V
Nominal current IN 15 A 15 A
mm²/AWG/kcmil 26-14 26-14
BV http://www.veristar.com/portal/veristarinfo/generalinfo/
approved/approvedProducts/equipmentAndMaterials 13403/B0 BV
LR http://www.lr.org/en 04/20034
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page5/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Approvals
NK http://www.classnk.or.jp/hp/en/ 09 ME 140
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B C
Nominal voltage UN 300 V 300 V
Nominal current IN 15 A 15 A
mm²/AWG/kcmil 26-14 26-14
cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B C
Nominal voltage UN 300 V 300 V
Nominal current IN 15 A 15 A
mm²/AWG/kcmil 26-14 26-14
IECEE CB Scheme http://www.iecee.org/ DE1-51360
Nominal voltage UN 500 V
mm²/AWG/kcmil 1.5
VDE Gutachten mit
Fertigungsüberwachung http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx 40009031
Nominal voltage UN 500 V
Nominal current IN 17.5 A
mm²/AWG/kcmil 1.5
EAC RU C-
DE.A*30.B.01742
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page6/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Approvals
RS http://www.rs-head.spb.ru/en/index.php 17.00013.272
cULus Recognized
Accessories
Accessories
DIN rail
DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white
passivated, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page7/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated,
length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page8/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
End cap-NS 35/ 7,5 CAP-1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated-NS 35/15 PERF 2000MM-1201730
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page9/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum,
uncoated, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
End cap-NS 35/15 CAP-1206573
DIN rail end piece, for DIN rail NS 35/15
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page10/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798
DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel,
galvanized, passivated with a thick layer, length:2000 mm, color:silver
Documentation
Mounting material-ST-IL-3039900
Operating decal for the ST terminal block
End block
End clamp-CLIPFIX 35-3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp-CLIPFIX 35-5-3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp-E/NS 35 N-0800886
End clamp, width: 9.5 mm, color: gray
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page11/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
End clamp-E/UK-1201442
End clamp, width:9.5 mm, height:35.3 mm, material:PA, length:50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color:gray
End clamp-E/UK 1-1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover-D-ST 2,5-TWIN-3030488
End cover, length: 60.5 mm, width: 2.2 mm, height: 29 mm, color: gray
Cover segment-DS-ST 2,5-3036602
End cover segments, large segment: 32.25 x 13.83 x 0.9, small segment: 22.65 x 11.65 x 0.9, color: gray
End cover-D-ST 2,5-TWIN-0,8 OG-3030512
End cover, length: 60.5 mm, width: 0.8 mm, height: 29 mm, color: orange
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page12/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
Insulating sleeve
Insulating sleeve-MPS-IH WH-0201663
Insulating sleeve, color: white
Insulating sleeve-MPS-IH RD-0201676
Insulating sleeve, color: red
Insulating sleeve-MPS-IH BU-0201689
Insulating sleeve, color: blue
Insulating sleeve-MPS-IH YE-0201692
Insulating sleeve, color: yellow
Insulating sleeve-MPS-IH GN-0201702
Insulating sleeve, color: green
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page13/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
Insulating sleeve-MPS-IH GY-0201728
Insulating sleeve, color: gray
Insulating sleeve-MPS-IH BK-0201731
Insulating sleeve, color: black
Insulating sleeve-ISH 1,5/0,2-3206131
Insulating sleeve, color: white
Insulating sleeve-ISH 1,5/0,5-3031034
Insulating sleeve, color: gray
Jumper
Plug-in bridge-FBS 2-4-3030116
Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: red
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page14/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
Plug-in bridge-FBS 3-4-3030129
Plug-in bridge, pitch: 4.2 mm, number of positions: 3, color: red
Plug-in bridge-FBS 4-4-3030132
Plug-in bridge, pitch: 4.2 mm, number of positions: 4, color: red
Plug-in bridge-FBS 5-4-3030145
Plug-in bridge, pitch: 4.2 mm, number of positions: 5, color: red
Plug-in bridge-FBS 10-4-3030158
Plug-in bridge, pitch: 4.2 mm, number of positions: 10, color: red
Plug-in bridge-FBS 20-4-3030352
Plug-in bridge, pitch: 4.2 mm, number of positions: 20, color: red
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page15/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
Plug-in bridge-FBS 2-4 BU-3030117
Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: blue
Plug-in bridge-FBS 3-4 BU-3030130
Plug-in bridge, pitch: 4.2 mm, number of positions: 3, color: blue
Plug-in bridge-FBS 4-4 BU-3030133
Plug-in bridge, pitch: 4.2 mm, number of positions: 4, color: blue
Plug-in bridge-FBS 5-4 BU-3030146
Plug-in bridge, pitch: 4.2 mm, number of positions: 5, color: blue
Plug-in bridge-FBS 10-4 BU-3036851
Plug-in bridge, pitch: 4.2 mm, number of positions: 10, color: blue
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page16/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
Plug-in bridge-FBS 20-4 BU-3030353
Plug-in bridge, pitch: 4.2 mm, number of positions: 20, color: blue
Plug-in bridge-FBS 2-4 GY-3030118
Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: gray
Plug-in bridge-FBS 3-4 GY-3030131
Plug-in bridge, pitch: 4.2 mm, number of positions: 3, color: gray
Plug-in bridge-FBS 4-4 GY-3030134
Plug-in bridge, pitch: 4.2 mm, number of positions: 4, color: gray
Plug-in bridge-FBS 5-4 GY-3030147
Plug-in bridge, pitch: 4.2 mm, number of positions: 5, color: gray
Labeled terminal marker
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page17/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
Zack marker strip-ZB 4 CUS-0824951
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 10.5 mm
Zack marker strip-ZB 4,LGS:FORTL.ZAHLEN-0805739
Zack marker strip-ZB 4,QR:FORTL.ZAHLEN-0805807
Zack marker strip, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100,
mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 10.5 mm
Marker for terminal blocks-UC-TM 4 CUS-0824573
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 10.5 mm
Marker for terminal blocks-UCT-TM 4 CUS-0829588
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 10.5 mm
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page18/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
Zack Marker strip, flat-ZBF 4 CUS-0825023
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 5.2 mm
Zack Marker strip, flat-ZBF 4,LGS:FORTL.ZAHLEN-0808626
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm
Zack Marker strip, flat-ZBF 4,QR:FORTL.ZAHLEN-0808820
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...
100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm
Zack Marker strip, flat-ZBF 4,LGS:GERADE ZAHLEN-0810818
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 2 ... 20, 22 ... 40, etc. up to 82 ...
100, mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 5.15 x 4.15 mm
Zack Marker strip, flat-ZBF 4,LGS:UNGERADE ZAHLEN-0810850
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99,
mounting type: snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 5.15 x 4.15 mm
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page19/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
Marker for terminal blocks-UC-TMF 4 CUS-0824630
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.6 x 5.1 mm
Marker for terminal blocks-UCT-TMF 4 CUS-0829651
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size: 3.4 x 4.7 mm
Marker pen
Marker pen-B-STIFT-1051993
Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm
Marker pen-X-PEN 0,35-0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Partition plate
Partition plate-ATP-ST-TWIN-3030789
Partition plate, length: 75.2 mm, width: 2 mm, height: 39 mm, color: gray
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page20/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
Spacer plate-DP PS-4-3036712
Spacer plate, length: 22.4 mm, width: 4.2 mm, height: 29 mm, number of positions: 1, color: red
Screwdriver tools
Screwdriver-SZF 0-0,4X2,5-1204504
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2-
component grip, with non-slip grip
Terminal marking
Zack marker strip-ZB 4 :UNBEDRUCKT-0805001
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 4.2 mm, lettering field size: 4.2 x 10.5 mm
Marker for terminal blocks-UC-TM 4-0818111
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 4.2 mm, lettering field size: 3.6 x 10.5 mm
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page21/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
Marker for terminal blocks-UCT-TM 4-0828732
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER,
BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 4.2 mm, lettering field size:
3.6 x 10.5 mm
Zack Marker strip, flat-ZBF 4:UNBEDRUCKT-0808587
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type:
snap into flat marker groove, for terminal block width: 4 mm, lettering field size: 4.2 x 5.2 mm
Marker for terminal blocks-UC-TMF 4-0818166
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 4.2 mm, lettering field size: 3.6 x 5.1 mm
Marker for terminal blocks-UCT-TMF 4-0828742
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER,
BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 4.2 mm, lettering field size:
3.4 x 4.7 mm
Test plug terminal block
Reducing plug-RPS-0201647
Reducing plug, color: gray
https://www.phoenixcontact.com/us/products/3037290
05/13/2019Page22/22
Feed-through terminal block-ST 1,5-TWIN WH-3037290
Accessories
Test plugs-MPS-MT-0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Test plugs-PS-4-3030970
Test plugs, color: red
Test socket
Test adapter-PAI-4-3030925
Test adapter, for 4 mm test plug and terminal blocks with 4.2 mm ... 8.2 mm pitch, color: gray
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com