07-2020, Rev. 0720
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
Potter & Brumfield
General Purpose Relays
PCB Relays
n 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact
n 5kV/10mm coil-contact, reinforced insulation
n Ambient temperature 85°C
Typical applications
Boiler control, timers, garage door control, POS automation, interface
modules
Approvals
VDE Cert. No. 40007571, cULus E214025, cCSAus 1142018;
CQC in preparation
Technical data of approved types on request
Contact Data 12A 16A
Contact arrangement 1 form C (CO) or 1 form A (NO)
Rated voltage 250VAC
Max. switching voltage 400VAC
Rated current 12A 16A
Limiting continuous current 12A 16A, UL: 20A
Limiting making current
max. 4s, duty factor 10% 25A 30A
Breaking capacity max. 3000VA 4000VA
Contact material AgNi 90/10
Frequency of operation, with/without load
DC coil 360/72000h-1
Operate/release time max., DC coil 8/6ms
Bounce time max., DC coil, form A/form B 4/6ms
Contact ratings
Type Contact Load Cycles
IEC 61810
RT314 DC-coil A (NO) 16A, 250VAC, cosφ=1, 85°C 30x103
RT314 DC-coil C (CO) 16A, 250VAC, cosφ=1, 85°C 10x103
RT314 DC-coil A (NO) 10A, 400VAC, cosφ=1, 85°C 150x103
RT114 DC-coil A (NO) 12A, 250VAC, cosφ=1, 85°C 50x103
RT114 AC-coil A (NO) 12A, 250VAC, cosφ=1, 70°C 100x103
UL 508
RT314 A/B (NO/NC)
20A, 250VAC, general purpose, 85°C
6x103
RT334 A (NO)
16A, 250VAC, gen. purpose, 85°C
50x103
RT314 A (NO) 1hp, 240VAC, 40°C 1x103
RT314 A (NO)
FLA/LRA, 4.5/13.1A, 480VAC, 70°C
100x
103
RT314, RTD14 A (NO)
1/2 HP@120VAC, 40°C
1x
103
RT314, RTD14 A (NO)
60LRA/10 FLA@240VAC, 40°C
6x
103
RT314, RTD14 A (NO)
A300 Pilot Duty, 40°C
6x
103
RT314, RTD14 B (CO)
B300 Pilot Duty, 40°C
6x
103
Contact Data (continued)
EN60947-5-1
RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050
EN60730-1
RT314 DC-coil A (NO) 12(2)A, 250VAC, 85°C 100x103
Mechanical endurance
DC coil >30x106 operations
1) For reflow solderable versions: actual contact performance may be influenced by the
reflow soldering process.
Coil Data
Coil voltage range, DC coil 5 to 110VDC
Operative range, IEC 61810 2
Coil insulation system according UL class F
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10%2) mW
005 5 3.5 0.5 62 403
006 6 4.2 0.6 90 400
009 9 6.3 0.9 200 400
012 12 8.4 1.2 360 400
018 18 12.6 1.8 770 420
024 24 16.8 2.4 1440 400
048 48 33.6 4.8 5520 417
110 110 77.0 11.0 288002) 420
2) Coil resistance ±12%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Power PCB Relay RT1
Z
b
07-2020, Rev. 0720
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
Potter & Brumfield
General Purpose Relays
PCB Relays
Power PCB Relay RT1 (Continued)
Other Data (continued)
Terminal type
standard version PCB-THT, plug-in
Weight 14g
Resistance to soldering heat THT, IEC 60068-2-20
RTII 270°C/10s
RTIII 260°C/5s
Packaging/unit tube/20 pcs., box/500 pcs.
Accessories
For details see datasheet
Accessories Industrial Power Relay RT
NOTE: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.
Insulation Data
Initial dielectric strength
between open contacts 1000Vrms
between contact and coil 5000Vrms
Clearance/creepage
between contact and coil ≥10/10mm
Material group of insulation parts IIIa
Tracking index of relay base PTI 250V
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
DC coil -40 to 85°C
Category of environmental protection, IEC 61810
standard version RTII - flux proof, RTIII - wash tight
Vibration resistance (functional)
form A/form B contact, 30 to 500Hz 20g/5g
Shock resistance (destructive) 100g
PCB layout / terminal assignment
Bottom view on solder pins
12 A, pinning 3.5 mm
1 form C (CO) contact
1 form A (NO) contact
12 A, pinning 5 mm
1 form C (CO) contact
1 form A (NO) contact
16 A, pinning 5 mm
1 form C (CO) contact
1 form A (NO) contact
S0418-CB S0418-CN S0418-CA
S0163-BES0163-BCS0163-BG
S0163-BH S0163-BD S0163-BF
*) With the recommended PCB hole sizes a grid
pattern from 2.5 mm to 2.54 mm can be used.
07-2020, Rev. 0720
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
3
Potter & Brumfield
General Purpose Relays
PCB Relays
Power PCB Relay RT1 (Continued)
Product code structure Typical product code RT 3 1 4 024
Type
RT Power PCB Relay RT1
Version
1 12A, pinning 3.5mm, flux proof
2 12A, pinning 5mm, flux proof *)
3 16A, pinning 5mm, flux proof
B 12A, pinning 3.5mm, wash tight
D 16A, pinning 5mm, wash tight
Contact arrangement
1 1 form C (CO) contact
3 1 form A (NO) contact
Contact material
4 AgNi 90/10
Coil
Coil code: please refer to coil versions table
Version
F Standard version
*) Wash tight version on request
Dimensions
S0272-BB
THT version
Product code Version Contacts Contact material Coil Part number
RT114012F 12A, pinning 3.5mm, 1 form C (CO) AgNi 90/10 12VDC 1419108-2
RT114024F flux proof contact 24VDC 1419108-3
RT134012F 1 form A (NO) 12VDC 5-1415020-1
RT134024F contact 24VDC 2-1393242-1
RT314005F 16A, pinning 5mm, 1 form C (CO) 5VDC 1419108-8
RT314012F flux proof contact 12VDC 2-1393237-2
RT314024F 24VDC 2-1393237-3
RT334012F 1 form A (NO) 12VDC 2-1393237-5
RT334024F contact 24VDC 2-1393237-7
RTB14005F 12A, pinning 3.5mm, 1 form C (CO) 5VDC 2-1419108-4
RTB14012F wash tight contact 12VDC 2-1419108-5
RTB14024F 24VDC 2-1419108-6
RTB34012F 1 form A (NO) 12VDC 2-1419108-7
RTD14005F 16A, pinning 5mm, 1 form C (CO) 5VDC 2-1419108-8
RTD14012F wash tight contact 12VDC 2-1419108-9
RTD14024F 24VDC 3-1419108-1
RTD34012F 1 form A (NO) 12VDC 3-1419108-6
RTD34024F contact 24VDC 3-1419108-9
This list represents the most common types and does not show all variants covered by this datasheet.
Other types on request
